Servo Motor Controllers and Drives

Miniature Servo Drives support up to 2,400 W.
Servo Motor Controllers and Drives

Miniature Servo Drives support up to 2,400 W.

Integrating FASST (Fast And Soft Switching Technology) power management with thermal management technology, Whistle servo drives exhibit power density of 35 W/cmÂ-³ and achieve more than 99% efficiency. Available models include WHI-15/60 (15 A, 60 Vdc), WHI-10/100 (10 A, 100 V), and WHI-15/100 (15 A, 100 V). Each model integrates SimplIQ digital core, which offers functionality for motion...

Read More »
Miniature Servo Drives support up to 2,400 W.
Servo Motor Controllers and Drives

Miniature Servo Drives support up to 2,400 W.

Integrating Fast and Soft Switching power management technology (FASST), Whistle Servo Drives exhibit power density of 35 W/cmÂ-³ and more than 99% efficiency. Models WHI-15/60, WHI-10/100, and WHI-15/100 are rated at 15 A/60 Vdc, 10 A/100 V, and 15 A/100 V, respectively. Featuring pin-based design for integration into application's PCB, drives include embedded SimplIQ digital core, which...

Read More »
Servo Motor Controllers and Drives

Servo Controller features diagnostic capability.

With scan rates of 1,000-2,000 scans/sec, Model 8720 Intelligent Servo Card can be operated in single, dual, or triple modular redundant configurations to run in centralized or distributed mode. It serves as I/O for Node Processor in centralized mode, while in distributed mode it runs user program that is downloaded from NetArrays logic development tool kit. Tag values are available to central...

Read More »
Servo Motor Controllers and Drives

Plug-In Servo Drive suits limited-space applications.

Based on MotionChip(TM) drive technology, intelligent PIM2403 module controls DC, brushless, linear, and step motors up to 75 W and embeds motion control, drive, and PLC functionalities in one 59 x 42 x 20 mm open frame unit. Programmable in EasyMotion Studio with Technosoft Motion Language and graphical tools, drive can execute motion modes in stand-alone or multi-axis operations. Distributed...

Read More »
Servo Motor Feedback System mounts directly to motor shaft.
Servo Motor Controllers and Drives

Servo Motor Feedback System mounts directly to motor shaft.

Eliminating radial runout and axial offset, SinCosÂ-® SEK52 with HIPERFACEÂ-® Interface features integral scanning to automatically compensate for eccentricity errors. Solution requires no bearings, facilitating installation, and provides high-resolution performance with 512 steps per revolution and 16 sine/cosine periods per revolution. System comes in 14 mm metal housing that is...

Read More »
Servo Motor Controller is CANopen enabled.
Servo Motor Controllers and Drives

Servo Motor Controller is CANopen enabled.

Designed for NEMA 17 and NEMA 23 frame I-Grade servo motors, SilverDust IGC single axis controller comes with serial communications (RS-232, RS-485), CANopen and, 7 I/O, and includes breakouts for power and communications. Other features include 12-48 Vdc input power, built-in voltage clamp/braking resistor, 4 analog inputs, and 32 K non-volatile memory, along with 100:1 inertial miss-match,...

Read More »
Servo Motor Controllers and Drives

Servo Drivers update 100 drives in under 100 -µsec.

Models AEP-90-18 and AEP-90-36 open standard EtherCAT-compatible Accelnet servo drives for brushless and brush motors deliver 18 and 36 A peak, respectively. Running on 20-90 Vdc power, operating modes include torque, velocity, trajectory tracking, point-to-point, and homing. Drives come equipped with Endat 2.2, Hiperface, incremental, and analog encoder feedback options. Interfaces include two...

Read More »
Servo Motor Controllers and Drives

Delta Tau & Panasonic Announce: Turbo PMAC2 Controller for Reatime Express(TM) Servo Network

Turbo PMAC2 Controller for Panasonic Realtime ExpressTM Provides up to 32-Axis Control CHATSWORTH, CA - MARCH XX, 2007 - Delta Tau Data Systems, the technology leader in multi-axis programmable motion control solutions, and Panasonic Electric Works Corporation of America, have announced the world class Turbo PMAC2 for Realtime ExpressTM (RTEX). The control for Panasonic A4N servomotors and...

Read More »
Digital Servo Drive features asynchronous control.
Servo Motor Controllers and Drives

Digital Servo Drive features asynchronous control.

Compatible with G-motion line of asynchronous gear motors, Model 940 PositionServo Drive with motion controller uses BASIC-like motion-programming language to provide indexing and positioning but can also run in traditional velocity or torque modes. Electronic Programmable Module removable memory chip allows servo control parameters and motion control programs to be transferred from one drive to...

Read More »
SERCOS Interoperability Demo to be Exhibited at Pack Expo 2006
Servo Motor Controllers and Drives

SERCOS Interoperability Demo to be Exhibited at Pack Expo 2006

The SERCOS interface-® trade associations will exhibit a SERCOS interoperability demo at Pack Expo 2006, Oct 29 - Nov 2, at McCormick Place, Chicago, IL. The exhibit, demonstrating interoperability of SERCOS II and SERCOS III motion controllers and servodrive products from multiple vendors, will be in the OMAC Packaging Workgroup booth, number C-64, strategically located in the concourse...

Read More »

All Topics