Photodiodes

Photodiode Detector provides 1 ns response time.

Designed to measure temporal pulse shape of lasers or other light sources, FPS-1 Fast Photodetector consists of photodiode sensor that handles wavelengths from 190-1,100 nm. Unit's 50 W load measures ns high peak power pulses, while 10 KW load measures longer and lower peak power pulses. Input can be direct beam or from fiber connection. Operating off battery or wall cube power supply, detector...

Read More »
In-Line Load Cells Available with USB Output
Load Cells

In-Line Load Cells Available with USB Output

FUTEK offers entire In-Line Load Cell series with USB output FUTEK Advanced Sensor Technology, Inc. (FUTEK) is pleased to announce a new addition to their USB Sensor Solutions Line. With 10 models to choose from, FUTEK's In-Line Load Cells (LCM series) are now available with USB capabilities. These Load Cells have been built for Endurance, Off-Center Loading, Press, and In-Line applications for...

Read More »
Vision and Imaging Sensors / Detectors

Raytheon's Multi-Spectral Targeting System Delivers High-Definition Image Capability

MCKINNEY, Texas -- Raytheon Company (NYSE: RTN) is upgrading sensors with enhanced target location accuracy and high-definition imaging. This is an important upgrade for our Multi-Spectral Targeting Systems family of sensors as we continue to provide high-performance, state-of-the-art technology for the warfighter," said Tim Carey, vice president for Intelligence, Surveillance and Reconnaissance...

Read More »
Non-Contact Linear Position Sensor mounts in cylinder.
Position Sensors / Detectors / Transducers

Non-Contact Linear Position Sensor mounts in cylinder.

Comprised of rod-style sensors intended for integration within hydraulic and pneumatic cylinders, TIM Series comes in nominal stroke lengths from 50-2,500 mm and operates under pressure to 350 bar with peaks to 530 bar. Magnetic pick-up position marker is mounted on application's piston rod. Shock and vibration ratings are 100 g and 25 g, respectively, and independent linearity is less than or...

Read More »
Digital Humidity Sensor features high-precision design.
Temperature Sensors / Detectors / Transducers

Digital Humidity Sensor features high-precision design.

Designed to measure relative humidity from 0-100% RH and temperature over range of -40 to +125°C, Model SHT25 achieves typical accuracies of 1.8% RH at 25°C and ±0.2°C with maximum tolerances of 2% RH or ±0.3°C. Unit consumes 3.2 Â-µW at 1 measurement/sec and provides RH response time of 8 sec. Embedded in reflow-solderable DFN 3-0 package measuring 3 x 3...

Read More »
Piezoresistive Pressure Transducer provides dynamic measurements.
Pressure Sensors / Detectors / Transducers

Piezoresistive Pressure Transducer provides dynamic measurements.

Offered in ranges of 15, 50, and 100 psig with 225 mV full scale output, Endevco® Model 8510C features non-linearity of less than 1% to 3X over-range with 4X minimum burst pressure and 20,000 g shock resistance. Miniature unit includes 4-arm strain gage bridge ion implanted into silicon diaphragm. With integral hybrid temperature compensation, transducer provides stable performance over...

Read More »
Stainless Steel Tape Position Sensor has 6.5 ft measurement range.
Position Sensors / Detectors / Transducers

Stainless Steel Tape Position Sensor has 6.5 ft measurement range.

Measuring 2 x 2 x 3.3 in., POSITAPE® WB10ZG series stainless steel tape position sensor has enclosure rated IP65, is shock resistant to 100 G for 11 msec, and vibration resistant to 20 G, 10 Hz to 2 kHz, for 10 cycles. Position transducer is available with 0.5-4.5 V, 0.5-10 V, and 4-20 mA analog outputs or SSI, CANopen, or CAN SAE J1939 digital outputs. In areas where icing can occur, flat,...

Read More »
Proximity/Light Sensor targets cell phone manufacturers.
Vision and Imaging Sensors / Detectors

Proximity/Light Sensor targets cell phone manufacturers.

Combining functions of digital ambient light sensor with those of digital proximity sensor, Model SFH 7770 determines brightness, detects presence of object nearby, and can tell whether object is moving closer or further away. Sensitivity from 1 Â-µW/cm² to 10 mW/cm² allows unit to operate at distances up to 30 cm. With digital output, sensor supports high-speed I²C...

Read More »
Impact (Shock) Indicators

Handling Indicator helps identify supply chain trouble spots.

Suitable for customers shipping large, heavy crates or containers, ShockWatch DropSpot provides indisputable evidence of mishandling during transportation and shipping. Unit is not activated until adhesive backing is removed and it is applied to product or shipping container. Available in 3 different G-level sensitivity options, sensor can be shipped worldwide to customers without accidental...

Read More »
Dimensional Measurement & Inspection Probes

Spectroscopy Probe analyzes polymer melts during extrusion.

Extruder Access Optical Diffuse Reflectance Probe, FDR-755, brings NIR spectroscopy to extrusion processes by introducing diffuse reflectance probe that can be mounted in any of Â-½-20 UNF Dynisco-compatible pressure transducer fittings available on polymer extruders. Use of diffuse reflectance minimizes required penetration into melt. This makes it compatible with any size extruder and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers