New! Never Installed Tube & Pipe Machinery for Sale
Rolling Mills

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »
Rear Handle Circular Saws are equipped with Star Protection Computer Controls™.
Saws

Rear Handle Circular Saws are equipped with Star Protection Computer Controls™.

Available in XSR01PT and XSR01Z models, 18V X2 (36V) LXT® Rear Handle Circular Saws comes with full 2-9/16 in. cutting capacity. Delivering 558 cuts in 2 x 4 SPF lumber and 291 cross cuts in 2 x 10 SPF lumber on a single charge with two 18V 5.0Ah batteries and 5.0Ah batteries respectively, unit’s blade measures 7-1/4 in. diameter and 12.4 lb of weight. Products are equipped with Extreme...

Read More »
Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone
Hand (Tool) Clamps

Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone

A pneumatic saw and clamp system that eliminates torch cutting and lets users produce clean accurate cuts on thick steel plate fast with no heat affect zone (HAZ) is available from ESCO Tool of Holliston, Massachusetts. ESCO’s APS-438 Air-Powered Saw and Quick-Clamp sets up fast using a 2”W steel track and has two wedge-style clamps that attach to steel plate up to 15’W by 3.5” thick and...

Read More »
DoALL® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017
Saws

DoALL® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017

DoALL will feature three metal-cutting band saws this spring at EASTEC 2017. These high-performance saws provide versatile, efficient, economical and accurate sawing solutions for a large variety of sawing needs. DoALL will have two new machines available for demonstrations in Building 2 - Booth C2004. EASTEC takes place in West Springfield, MA from May 16th through the 18th. More information...

Read More »
XCU03Z Chain Saw is equipped with extreme protection technology.
Chain Saws

XCU03Z Chain Saw is equipped with extreme protection technology.

Suitable for cutting and trimming, XCU03Z Chain Saw is designed with outer rotor brushless motor with direct drive system. Delivering 0-3,940 FPM speed with zero emissions and low noise, unit features 14 in. guide bar and weighs 11.5 lbs., with batteries. Powered by two 18V LXT® batteries, saw comes with electronically controlled BL™ brushless motor.

Read More »
Saws

CM602 Sawing Machine automatically selects cutting head feed rate.

Suitable for cutting short and medium length steel, copper, brass and aluminum tubes, CM602 automatic CNC sawing machine offers material loading using servomotor carriage. Handling tube and bar up to 4 in. dia, unit’s capable blade speed is 5000 RPM. Assisting operator via instruction icons on touchscreen panel, CM602 selects appropriate blade when shape, size and length of material is entered....

Read More »
36-6022 Ten-inch Portable Table Saw features 2.5 in. dust port.
Saws

36-6022 Ten-inch Portable Table Saw features 2.5 in. dust port.

With 30 inch right rip capacity and shop-grade power in package, 36-6022 10-inch portable table saw features mini-T Square fence with fully adjustable clamping force and telescoping rails. Including strong tube-frame assembly with excellent dust collection, saw comes with handy cord wrap and single handle bevel adjustment. Offering riving knife to separate wood after the cut, unit prevent...

Read More »
VA-L 500 Circular Cold Saws features frequency-controlled drive system.
Saws

VA-L 500 Circular Cold Saws features frequency-controlled drive system.

Along with Lift-and-Shift device for material feed, VA-L 500 Circular Cold Saw is equipped with NC Controlled Gripper Feed Unit. Device comes with a 32 H.P. frequency controlled drive motor with 800-3400 RPM speed range and a servo-driven downfeed with an adjustable rate from .39”/sec to 19.6”/sec. Cold saw offers cutting range of 6.0” (152 mm) for round materials or 6” x 6” for square...

Read More »
Landscape Trimmers

Greenworks Commercial Launches Dedicated Line of Battery-Powered Outdoor Power Equipment for Landscaping Professionals

82-volt battery technology provides best-in-class power and run-time CHARLOTTE, N.C. - Greenworks Commercial, leaders in battery-powered outdoor power tools for landscaping professionals, announced today that it has launched a dedicated line of commercial tools specifically engineered to meet the demanding needs of professional landscapers. Powered by 82-volt battery technology, the complete line...

Read More »
Tools

New Festool HK/HKC Carpentry Saws Win Industry Recognition

2016 Editors’ Choice Award from Tools of the Trade and Best Corded Saw from ProTool Reviews PTIA Lebanon, IN – The new carpentry saw from Festool, the HK/HKC, has just won a 2016 Editors’ Choice Award from Tools of the Trade and a 2016 PTIA (Power Tool Innovation Award) from Protool Reviews. Launched just last month, the Festool HK/HKC Carpentry saw, with integrated guide rail and other...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics