Ripping Machine targets small to medium-sized shops.
Stationary Circular Saws

Ripping Machine targets small to medium-sized shops.

Automating ripping process using computer-controlled system, TigerRip 1000 Rip System features Dynamic Optimization™, which enables simultaneous optimization of panel and fixed width lumber.Â- Machine offers 1–15 in. rip capacity with 18 in. stroke, 30–110 fpm feed speed, and 2,000–4,000 BF/shift based on 8 hr shift using 12 ft stock material. TigerRip 1000 can track cut list...

Read More »
Three-In-One Saw handles cutting, surface prep, and more.
Saws

Three-In-One Saw handles cutting, surface prep, and more.

With 7.5 A motor, 4 in. abrasive wheels, 7 cutting blade variations, and 2 surface prep blade options, Dremel® Ultra-Saw™ works with such materials as metal, tile, plastic, masonry, and wood while offering clear line-of-sight. Cutting functions are complemented by surface preparation, surfacing, cutting (straight and plunge), and flush cutting capabilities. Along with multiple cutting...

Read More »
Experienced Kubiec-Conduit Producer Chooses Thermatool Equipment for Mill in Ecuador
Arc / Resistance Welders

Experienced Kubiec-Conduit Producer Chooses Thermatool Equipment for Mill in Ecuador

Kubiec-Conduit, Ecuador, selected Thermatool to supply a 200kW HAZControl™ Technology Welder and an Alpha® Flying Shear Mach 2 Cutoff. The two new pieces of equipment were selected for high speed production of conduit to keep up with growing demand in South America. The Thermatool HAZControl™ Technology Welder is the only welder in the tube and pipe industry that allows the operator to...

Read More »
BLM GROUP USA to Feature EM80 "Machining Center" at IMTS 2014
Machining Centers

BLM GROUP USA to Feature EM80 "Machining Center" at IMTS 2014

BLM GROUP USA TO FEATURE EM80 'MACHINING CENTER' AT IMTS 2014 BLM GROUP USA (Wixom, MI), (www.blmgroup.com) a global leader in the manufacture of tube processing equipment will showcase the EM80, a combined automatic sawing and end machining center for tube and bar processing in Booth S-9174 at IMTS '14, September 8-13, 2014, McCormick Place, Chicago, IL. In addition to the EM80 machining center,...

Read More »
Compound Miter Saw features 10 in. carbide-tipped blade.
Tools

Compound Miter Saw features 10 in. carbide-tipped blade.

Powered by direct drive 13 A motor with soft start and no load speed of 4,300 rpm, Model LS1018 is suited for applications ranging from fine woodworking and carpentry to general construction. Saw miters 0–47° left and 0–60° right, with positive stops at 0, 15, 22.5, 31.6, and 45° (left and right). At 90°, Model LS1018 has 12 in. crosscutting capacity, with 8Â-½...

Read More »
Circular Cold Saw features fully automated inclined magazine.
Saw Blades

Circular Cold Saw features fully automated inclined magazine.

Using carbide-tipped disposable blades to cut ferrous material at 90°, Model HCS-90E has inclined magazine which holds up to 3,500 lb of 12 ft long material. Once loaded with bundles, machine will run without interruption, cutting pre-programmed lengths, ejecting trim and remnants, and channeling good cut pieces to holding bin. Machine offers infinitely variable feed or reverse feed rate up...

Read More »
CS Unitec's New Dry Cutting Miter Saw for Metal Cuts up to 4" Deep in Steel, Stainless Steel and More
Saws

CS Unitec's New Dry Cutting Miter Saw for Metal Cuts up to 4" Deep in Steel, Stainless Steel and More

CS Unitec has introduced a portable, dry cutting miter saw for steel, stainless steel and other materials. The Model 9410 ND is the only metal cutting machine on the market with stepless adjustments from -45° to + 45°. The 10 Tungsten Carbide Tipped (TCT) saw blade dry cuts metal without the need for lubrication or manual deburring. The cutting table includes a 3-step quick release...

Read More »
Chop Saw (14 in.) can dry cut metal pipe, plate, and profiles.
Saw Blades

Chop Saw (14 in.) can dry cut metal pipe, plate, and profiles.

Without requiring lubrication or manual deburring, Model 9435 Premium Super Dry Cutter saws up to 6 in.Â- depth at 90° in stainless steel, ferrous and non-ferrous metal, plastic, aluminum, and more. Bevel cuts up to 4 ¾ in. at 45° can be achieved with quick-release, heavy-duty vise, and 19 A, 115 V motor delivers free cutting speed of 1,400 rpm. Supplied...

Read More »
Abrasive Belt Coping Machine has compact footprint.
Stationary Oscillating Saws

Abrasive Belt Coping Machine has compact footprint.

Used to cope square, rectangular, and irregularly shaped tubing and pipe forÂ- seamless fit, LCV 3000 is designed to take up minimal shop space and fit into mobile welding truck. This 300 lb machine, measuring 48 x 30 x 14 in., can be equipped with ¾–5 in. spindles and is manufactured from steel and aluminum for strength and service life. Adjustable...

Read More »
Automatic Mitering Bandsaw offers PC-based remote control.
Stationary Band Saws

Automatic Mitering Bandsaw offers PC-based remote control.

Along withÂ- 118 in. feeding gripper, HBP-310/523G/A features CNC-dialogue control via Windows®-based PC. Horizontal bandsaw, used for cutting all materials from profiles to high-tensile solids, has 15 in. flat panel LCD (1,024 x 768) and allows data sharing with key personnel. Along with 105° miter range, features include saw band deflection tracking, cast...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers