Powerful Cutting of HDPE Pipe with Pneumatic Chain Saw System
Chain Saws

Powerful Cutting of HDPE Pipe with Pneumatic Chain Saw System

CS Unitec’s chain saw and pipe clamp system is ideal for clean, straight and oil-free cutting of High Density Polyethylene (HDPE) heavy-wall pipe in the natural gas, municipal waterworks, petrochemical and power generation industries. Model 5 1027 0040 PC is designed with a chain brake to stop chain kickback. The clamp holds the saw to the pipe assuring straight cuts and safe operation. An...

Read More »
New! Never Installed Tube & Pipe Machinery for Sale
Rolling Mills

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »
New! Never Installed Tube & Pipe Machinery for Sale
Rolling Mills

New! Never Installed Tube & Pipe Machinery for Sale

NEW! 3.125″ x .134″ UNIVERSAL Tube Mill Line, Stock #3462 Equipped With: KENT Double Uncoiler, KENT Shear & End Welder, KENT Horizontal Accumulator, YODER Forming Mill, Solid State HF Welder, YODER Sizing Mill, UCG Flying Cold Saw, (3) AC Motors and UCG Drive System Specifications: Max Tube O.D.: 3.125″ (79.3 mm) Min Tube O.D.: 1″ (25.4 mm) Max Round Wall: .134″ (3.40 mm) Max Shapes...

Read More »
Rear Handle Circular Saws are equipped with Star Protection Computer Controls™.
Saws

Rear Handle Circular Saws are equipped with Star Protection Computer Controls™.

Available in XSR01PT and XSR01Z models, 18V X2 (36V) LXT® Rear Handle Circular Saws comes with full 2-9/16 in. cutting capacity. Delivering 558 cuts in 2 x 4 SPF lumber and 291 cross cuts in 2 x 10 SPF lumber on a single charge with two 18V 5.0Ah batteries and 5.0Ah batteries respectively, unit’s blade measures 7-1/4 in. diameter and 12.4 lb of weight. Products are equipped with Extreme...

Read More »
Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone
Hand (Tool) Clamps

Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone

A pneumatic saw and clamp system that eliminates torch cutting and lets users produce clean accurate cuts on thick steel plate fast with no heat affect zone (HAZ) is available from ESCO Tool of Holliston, Massachusetts. ESCO’s APS-438 Air-Powered Saw and Quick-Clamp sets up fast using a 2”W steel track and has two wedge-style clamps that attach to steel plate up to 15’W by 3.5” thick and...

Read More »
Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone
Hand (Tool) Clamps

Pneumatic Saw & Clamp System Cuts Steel Plate Wihout Heat Affect Zone

A pneumatic saw and clamp system that eliminates torch cutting and lets users produce clean accurate cuts on thick steel plate fast with no heat affect zone (HAZ) is available from ESCO Tool of Holliston, Massachusetts. ESCO’s APS-438 Air-Powered Saw and Quick-Clamp sets up fast using a 2”W steel track and has two wedge-style clamps that attach to steel plate up to 15’W by 3.5” thick and...

Read More »
DoALL® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017
Saws

DoALL® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017

DoALL will feature three metal-cutting band saws this spring at EASTEC 2017. These high-performance saws provide versatile, efficient, economical and accurate sawing solutions for a large variety of sawing needs. DoALL will have two new machines available for demonstrations in Building 2 - Booth C2004. EASTEC takes place in West Springfield, MA from May 16th through the 18th. More information...

Read More »
DoALL-® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017
Saws

DoALL-® Features 9ʺ to 16ʺ Round Capacity Metal Cutting Band Saws at EASTEC 2017

DoALL will feature three metal-cutting band saws this spring at EASTEC 2017. These high-performance saws provide versatile, efficient, economical and accurate sawing solutions for a large variety of sawing needs. DoALL will have two new machines available for demonstrations in Building 2 - Booth C2004. EASTEC takes place in West Springfield, MA from May 16th through the 18th. More information...

Read More »
XCU03Z Chain Saw is equipped with extreme protection technology.
Chain Saws

XCU03Z Chain Saw is equipped with extreme protection technology.

Suitable for cutting and trimming, XCU03Z Chain Saw is designed with outer rotor brushless motor with direct drive system. Delivering 0-3,940 FPM speed with zero emissions and low noise, unit features 14 in. guide bar and weighs 11.5 lbs., with batteries. Powered by two 18V LXT® batteries, saw comes with electronically controlled BL™ brushless motor.

Read More »

All Topics