Solid State Relay suits industrial control applications.

Solid State Relay suits industrial control applications.

Model FTR-SL SIP-type, 1 A relay, measuring 5 x 28 x 15 mm, is suited for high-density PCB mounting. It offers 5, 12, 24, and 60 Vdc nominal control voltages ranging from 3.75-66 Vdc, and can handle 50 A surge and peak voltage of 250 Vac. Built-in varistor/snubber circuit prevents malfunction from overvoltage and/or overcurrent, while zero-cross circuit minimizes noise and inrush current. Relay...

Read More »
DIP Relay suits high-density PC boards.

DIP Relay suits high-density PC boards.

Subminiature Model WJ102 provides high-sensitivity switching with .15 W coil option. Small, lightweight relay has gold-plated, bifurcated contacts that provide reliable switching. It is manufactured and quality controlled to ISO-9002 and QS-9000 standards.

Read More »
Latching Power Relay handles 100 A at 240 Vac.

Latching Power Relay handles 100 A at 240 Vac.

Model AZ2510 SPST Relay features dielectric strength of 4,000 Vrms from contact to coil and 2,000 Vrms between open contacts. It requires 50 msec pulse to either Set or Reset. Single and dual coil versions are available. Coil connections are made via PCB terminals, and power connections are made via heavy, bus-type, rigid terminals with threaded holes. Relay includes manual position indicator,...

Read More »
High Flow Relay features 1:1 ratio.

High Flow Relay features 1:1 ratio.

Type 79 relay uses rolling-diaphragm technology and pilot pressure to control output pressure over range of flow and supply variations. Supply and output ports are available in 3/8, Â-½, Â-¾, and 1 in. NPT. Pilot and output gauge ports are Â-¼ in. NPT. Low-bleed and non-relieving versions are available, as well as tapped exhaust, supply gauge port, and external corrosive-resistant...

Read More »
Contactors/Overloads offer switching currents up to 900 A.

Contactors/Overloads offer switching currents up to 900 A.

Series CGT relays integrally mount to Series CGC contactors and provide thermal overload protection with Class 10 trip characteristics. Contactors offer selection of coil voltages and come with built-in auxiliary outputs. Series CGD digital motor protection relays provide motor and systems monitoring in panel mountable package with digital display. Available with plastic or metal housing,...

Read More »
Safety Relay switches 10 A current.

Safety Relay switches 10 A current.

Forcibly-guided Model G7S-E offers 4 NO and 2 NC or 3 NO and 3 NC pole configurations. Operate and release times are 50ms, max. DIN rail and PCB mounting sockets are available with quick-release holding clamps for installation and removal. Tested to EN, UL, and CSA standards, relay is suited for safety applications such as controllers for power presses, injection molding and extruding equipment,...

Read More »
Reed Relays provide leadless designs.

Reed Relays provide leadless designs.

Models B10 and B40, featuring ball-grid-array packaging, offer RF impedance close to 50 ohms. Single channel, Form A Model B10 uses 0.1 in.Â-² board space and includes 3.3 or 5 V coils. RF insertion loss is >10 GHz. Model B40 features 4 independent form A channels in one quad package requiring 0.215 inÂ-² of board space. Both 3.3V and 5V coils are available and RF insertion loss is >11...

Read More »
Lock-Out Relays are designed to replace various GE models.

Lock-Out Relays are designed to replace various GE models.

Series 24 Lock-Out Relays (LORs) feature manual-, electric-, or self-reset capabilities. Manual-reset LORs have trip speeds of less than 8 msec, while electric- and self-reset models have standard-speed (12-15 msec) or high-speed (8 msec or less) trip configurations. Products have up to 10 decks in one relay, providing up to 40 independent contacts. Contacts are rated at 60 A for 1 min and 30 A...

Read More »
Telecom Relay suits low power consumption designs.

Telecom Relay suits low power consumption designs.

With 16 pin DIP footprint, model AZ8222, 2-pole telecom relay has DC coils from 3-48 Vdc in 3 sensitivities: Standard (320 mW), Sensitive (200 mW), and Ultra-Sensitive (150 mW). Bifurcated cross-bar contacts and switching capacity of 60 W or 125 VA make product suited for use in low power consumption designs. Unit meets FCC Part 68 requirements for 1,000 Vrms dielectric strength and 1,500 V...

Read More »
Switching Relay Modules suit real-time control applications.

Switching Relay Modules suit real-time control applications.

Electromechanical relay modules allow control and design engineers to perform relay switching on high and low-voltage AC/DC signals. Products withstand 50 g shock and 5 g RMS vibration. Model cFP-RLY-421 includes 8 Form A, SPST relays, while cFP-RLY-423 delivers 4 Form C, SPDT relays. Each channel on modules uses relay with separate ground plane. Units can switch up to 250 Vac or 35 Vdc at 1.5 A...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics