Putty

Latest PIG High-Temp Epoxy Putty is Composed of Premeasured Base and Activator

Latest PIG High-Temp Epoxy Putty is Composed of Premeasured Base and Activator

The PIG™ High-Temp Epoxy Putty is used for patching applications such as exhaust pipe, tanks, iron piping, castings, stripped threads, molds and ductworks. The product can be used for repairs in temperatures as high as 500ºF and as low as -40ºF. It cures concrete-hard in one hour and sets in minutes at room temperature. The PIG™ putty is solvent-free and can be drilled, tapped, sanded or...

Read More »
Cera Mastic Refractory Putty dries at room temperature.

Cera Mastic Refractory Putty dries at room temperature.

Used for patching, repairing and filling fissure, Cera Mastic Refractory Putty offers adhesion to refractory types without chipping or flaking. Providing tough repaired surfaces over temperature range of 500°C to 1500°C, unit does not contain refractory ceramic fiber. Product is not sensitive to freezing and exhibits no sintering, shrinkage, or cracking with thermal cycling.

Read More »
High-Temperature Sealant suits applications to 950

High-Temperature Sealant suits applications to 950

Formulated by combining high-temperature resin with ceramic fibers and powders, Pyro-Putty™ 950 can be used as gasketing compound for boilers, compressors, heat exchangers, furnaces, ovens, and exhaust manifolds. Product repairs rough, scored, or irregular surfaces and is resistant to chemical and steam attack, high pressure/vacuum atmospheres, mechanical vibration, and joint movement. Offered...

Read More »
Epoxy Stick facilitates fuel tank repairs.

Epoxy Stick facilitates fuel tank repairs.

Offering resistance to ethanol and most solvents, Permatex Fuel Tank Repair Epoxy Stick is suited for filling holes and damaged seams in both metal gas tanks and containers. Product comes as 2-part putty in stick form which helps measure and mix proper amount. Finished repair sets in just 1 hour and can be drilled, sanded, threaded, or filed after 5 hours. When fully cured, epoxy withstands...

Read More »

Silicone Putty fills gaps in electronic assemblies.

With thermal conductivity of 3.5 W/mK, Tputty(TM) 506 series is specifically formulated to fill large and uneven gaps in high-wattage electronic assemblies. Soft, single-part, silicone putty does note require any cure, transfers little to no pressure between interfaces, and is non-abrasive. Conformable and reworkable, filler is colored for automatic detection systems and has viscosity that...

Read More »
Repair Putty can cure underwater.

Repair Putty can cure underwater.

Designed to bond to fiberglass, wood, metal, glass, and concrete, Fix Repair Putty is impervious to oil, gasoline, alcohol, caustic detergent, and salt water oxidation. Product is heat tolerant to 300-

Read More »
Adhesives and Putties suit applications to 2,000F.

Adhesives and Putties suit applications to 2,000F.

Designed to bond metals, ceramics, and dissimilar materials, Durabond(TM) Metallic Adhesives and Putties overcome brittle bonds obtained with ceramics and offer impact resistance associated with soldering and welding. Adhesives can be drilled, tapped, and machined, and do not contain epoxies or silicones. Inorganically bonded and chemically cured, VOC-free products are suitable for repairing and...

Read More »

Mold Repair Paste comes in 50 ml dual-barrel cartridges.

Formulated to produce long-lasting repairs to fiberglass molds, RAPID PATCH repair paste can be feathered out after curing for less than 20 minutes at 75-ºF. It chemically bonds to damaged mold sections, and offers sag resistance even when applied to vertical surfaces. Based on methylmethacrylate (MMA) chemistry, fast-curing paste can also be used for filling plastic, steel, and aluminum...

Read More »

Medical Products meet osteoinductive bone graft needs.

NuBone(TM) Osteoinductive Bone Graft product line includes 100% allograft tissue product, composed of osteoinductive demineralized bone matrix (DBM) combined with cortical bone gelatin carrier. Free of chemical additives and synthetics, NuBone DBM Putty and NuBone DBM Gel are designed for use in spinal fusion, trauma, and reconstructive bone grafting procedures. Aseptic manufacturing process...

Read More »

Acoustical Solutions Now Offers a Full Line of Firestopping Products to Defend Against Sound and Smoke

Firestop materials serve two primary purposes - they reduce sound transmission between rooms, and they block the spread of flame and smoke through the small spaces in a building. These products are appropriate for use in residential, commercial and industrial settings. In terms of sound reduction, firestop materials work well to seal off the tiny spaces in walls, floors and ceilings through which...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics