Parts Cleaning Systems provide inline cleaning and drying.
Aquamaster CD Rotary Drum Systems combine gentle tumbling with high-volume spray to remove coolant, chips, oil, manufacturing soils, and other unwanted contaminants. Standard designs are equipped with heated wash and ambient air blowoff. Auger style rotary drum includes variable speed drive for controlling product throughput. Drum perforations are sized based on part type and configuration, and...
Read More »
Rotary Parts Washer is constructed of stainless steel.
Measuring 8 x 8 x 9 ft, 3-stage Model RCWR-72E accommodates up to 2,500 lb of parts and features 6 ft dia turntable. Parts, loaded from 3 x 6 ft opening at front of unit, are spray-cleaned by solution coming from adjustable nozzles at top, sides, and bottom of stainless steel cabinet. Water rinse from nozzles precedes automatic moisture blow-off prior to pail removal. Unit is suited for cleaning...
Read More »
Oil Split Cleaner removes difficult-to-emulsify oils.
Safe ScrubÃ-® OS lifts oil from iron and steel parts and then floats oil residue to liquid surface for removal from tank by oil skimmer or coalescing filter. Used as stand-alone cleaner or pre-cleaner, product is effective on mineral oil grinding coolants, drawing and stamping lubes, and hydraulic oils as well as water soluble/synthetic fluids and surface soils. Normal cleaning cycle calls...
Read More »
Vertical Washers fit where floor space is tight.
Along with eye-level controls and programmable PLC control with touch screen interface, Hotpack Vertical SpaceSaver(TM) Washers are equipped with automatic detergent and neutralizer dispensing pumps. Load height of 33 in. off floor allows users to load unit without bending over. Users can select preprogrammed wash cycles or develop custom cycles with temperatures up to 82Ã-
Read More »
How to Properly Implement Welding Automation to Improve Return on Investment (ROI)
Learn more about the value of automated welding systems, how to calculate your automation ROI, and how to get started.
Read More »
Bioremediating Parts Cleaners eliminate hazardous waste.
Made of high-density polypropylene, Models BIO436 and BIO536 feature solid-state electronic controls and 300 gph pump that delivers heated, aqueous, non-hazardous, pH-neutral cleaning solution through Flow-Thru brush or adjustable nozzle. Built-in safety features include low liquid level protection, ground fault circuit indicator, and clearly marked status indicator lights.
Read More »
Aboveground Washing System features closed-loop operation.
CyclonatorÃ-® II is a stainless steel filtration system for use with modular, aboveground wash pad or with existing sump or trench drain. Featuring no-bypass filtration, continuous ozone injection, and 1-button operation, system is suited for removing mud and grease from equipment or pre-treating parts before painting. It includes Allen-Bradley(TM) touch-safe electronics, ITT Goulds(TM)...
Read More »
Aqueous Parts Washer provides continuous cleaning.
Single-stage, pass-through parts washer, Model 8600, features 16 in. wide steel conveyor belt that moves at speeds to 8 fpm, carrying parts through wash tunnel where they are blasted with hot water spray from 360Ã-
Read More »
Parts Cleaning System suits low volume applications.
Utilizing non-halogenated hydrocarbon process, Minio 85C removes oil, grease, and swarf from metal, plastic, or glass. Typical throughput is 5 or 6 baskets/hr with max weight of 110 lb/batch. With footprint of 39 x 79 in., closed loop system offers continuous filtration and recirculation, and operates under vacuum with virtually no emissions. It provides injection flood washing, vapor degreasing,...
Read More »
High-Pressure Washer provides controlled cavitation.
Designed to clean machined parts of cutting fluids and loose chips, U-Jet(TM) III washes up to 6 sides of complex components. Triplex pump produces water pressure to 1,015 psi and delivers it at max flow rate of 13.0 gpm and sonic velocities to 1,100 ft/sec. All washing/cleaning operations are controlled via Mitsubishi PLC controller. Unit incorporates horn nozzle design, and workspace...
Read More »
Ultrasonic Cleaning Module enables wire/tape cleaning.
Series USCM System cleans ferrous, non-ferrous, copper, high/low-carbon steel, glass, and plastic. It removes oil, grease, stearate, soap, and dust and is capable of single-strand and multiple-strand cleaning. Each system includes SS liquid tank, air wipe for final drying, control cabinet for ultrasonic generators, and PLC. Choice of 5 different ultrasonic processors is offered, from 250-4000 W....
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
