Parts Washing Equipment

Aqueous Cleaning Systems from Turbex
Parts Washing Equipment

Aqueous Cleaning Systems from Turbex

Basket and jets move independently Turbex will present at MACH its newest agency line of aqueous cleaning machines from the German manufacturer, MAFAC. Intended for high precision cleaning applications, the equipment uses a world-patented system whereby the movements of the holding basket and spray jets are individually adjustable, allowing them to rotate in the same or opposite directions. Each...

Read More »
Parts Washing Equipment

Elmasonic Ultrasonic Cleaner

Tovatech is pleased to announce a special offer on their top selling Elma Ultrasonic Cleaners. The Elmasonic S ultrasonic cleaner operates in 3 modes: Sweep, Degas, and Normal. Cleaning is optimized in Sweep mode. Sweep guarantees a homogeneous sound field by continuously shifting the sound field maxima. Fresh cleaning liquid does not clean efficiently until fully degassed, as dissolved gas...

Read More »
GEN3 Systems to Showcase CM-Series Ionic Cleanliness Tester Line at IPC/Apex 2012
Parts Washing Equipment

GEN3 Systems to Showcase CM-Series Ionic Cleanliness Tester Line at IPC/Apex 2012

Farnborough, Hampshire, UK - Gen3 Systems, a global leader in solderability, cleanliness, and process optimization test equipment, will exhibit key systems from its CM‐Series (Contaminometer) product line at IPC/APEX 2012 in San Diego, California, February 28 - March 1, 2012, in Booth #617. The exhibit's centerpiece will be the new CM33L Large‐Format Ionic Cleanliness Test System, which...

Read More »
Pneumatic Wash Unit cleans printing accessories.
Parts Washing Equipment

Pneumatic Wash Unit cleans printing accessories.

Suitable for cleaning sealed ink cups, plates, and other printing accessories, SUPERWASH XP-550 has 550 mm diameter basket, entirely constructed of stainless steel with active carbon filter and exhaust device. Eight pressure spray nozzles located above, below, and on sides of tub deliver optimum cleaning. Washing process takes 10-20 min of unattended operation time to clean and load parts....

Read More »
Valve Components Cleaned Efficiently and Cost-Effectively
Parts Washing Equipment

Valve Components Cleaned Efficiently and Cost-Effectively

At the Poole factory of Thompson Valves Ltd, a manufacturer of high quality valves and flow control products, an ageing, in-line washing system has been replaced by a batch cleaning machine that is proving much more versatile in operation. Called Elba, the aqueous machine is supplied in the UK by Turbex. The superseded washing, rinsing and drying line, which was also water-based, processed...

Read More »
Aqueous Cleaning Machine increases workplace safety, efficiency.
Parts Washing Equipment

Aqueous Cleaning Machine increases workplace safety, efficiency.

Intended for batch processing of loads up to 30 kg, Versa Mk III modular, ultrasonic cleaning system is capable of uniformly washing, deswarfing, degreasing, rinsing, and drying components. Any combination of said processes may be specified, based on tanks of 40, 80, or 120 L capacity, to define system that can be expanded/altered after installation. Transferring basket of components between each...

Read More »
Ultrasonic Cleaning Machine is designed for firearms.
Parts Washing Equipment

Ultrasonic Cleaning Machine is designed for firearms.

As complete, self-contained systems, Gunsonic HG 1206 and LG 3606 include all hardware and accessories needed to completely clean and lubricate firearms: basket, lid, lubrication tank, detergent, lubricant, and parts dryer. Construction of included Vibra-Bar® transducers provides complex resonance of 40-90 kHz, which produces Simultaneous Multi-Frequency® that virtually eliminates...

Read More »
Compact, Aqueous Cleaning Line Suits Energy System Manufacturer
Parts Washing Equipment

Compact, Aqueous Cleaning Line Suits Energy System Manufacturer

Energy storage and clean fuel company, ITM Power, which manufactures hydrogen energy systems at its factory in Sheffield for decarbonising transport and the built environment, has chosen an aqueous, ultrasonic cleaning line from Turbex to wash and degrease many of the components and fittings involved in the production process. Project and test manager at ITM Power, Alex Shields, said, A high...

Read More »
Unexpected Safety
Parts Washing Equipment

Unexpected Safety

The facility manager at a Ohio college switched from conventional cleaning-using mops, buckets, sprayers, and brooms-to a more advanced technology, No-Touch Cleaning® developed by Kaivac. With the No-Touch system, cleaning solution is applied to surfaces. The same areas are then blasted clean, and a built-in wet/vac picks up moisture and soil. The machines were first tested in the kitchens...

Read More »
Parts Washing Equipment

Metal Parts Washers help reduce chemical waste.

Offered in 29 x 28 x 44 in., 24 gal mini and 38 x 27 x 43 in., 37 gal maxi versions, Bio-Circle Parts Washers come with 6 scheduled maintenance calls, Bio-Circle L solution, system startup, and employee training. Bio-Circle L cleaner/degreaser is non-flammable, non-toxic, NSF C1 Listed, and VOC-free, eliminating waste disposal issues. It also carries Triple Zero rating on NFPA Safety Diamond and...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics