New Modules Products

Slot Systems and Connectors support ExpressCard technology.

ExpressCard(TM) host connectors and slot systems support implementation of ExpressCard technology in mobile and desktop PCs. Top-mount universal slot systems with card push ejection are offered with slot standoffs from 0.0-2.2 mm. Supporting USB 2.0 and PCI Express(TM) serial interfaces, 26-position connector system is validated at PCI Express data rates of 2.5 and 5.0 Gbps. RoHS-compliant host...

I/O Modules feature pluggable connectors.

Offered as analog, digital, and special function modules, 753 Series facilitates installation and minimizes wiring errors. Pluggable I/O modules, along with corresponding connector, have overall dimensions of 12 x 64 x 100 mm. Orange pull tabs enable tool-less removal of connector or I/O module, and built-in test points are located at every connection point. Along with integrated strain-relief,...

LED Modules use 1 W of power.

Measuring 10.00 x 13.00 mm including heat sink, MagnaBrite 1-Watt LED module handles forward currents to 350 mA. Series offers 20.00 mm dia base that is pre-wired for direct interface and is available in white, red, green, blue, and yellow. It offers operating temperature of -30 to +120Ã-

Interface Module facilitates DAQ system communication.

Computer interface Model CP22 complements MGCplus multi-channel data acquisition system by allowing rapid communication from sensors. In addition to RS232 serial link, unit includes TCP/IP, 10/100 Mbit Ethernet interface, which allows transmission of over 150,000 measured values/sec, across 64 channels, each operating at 2.4 kHz sample rate. USB 1.1 interface enables transmission of more than...

Maximum Grip and Comfort With Standard and Custom Knobs

Learn more about Innovative Components' wide variety of knobs available or explore our customization options for your specific applications and needs in this compressive product guide.

I/O and Processor Modules target telecom manufacturers.

Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring IntelÃ-® PentiumÃ-® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in....

Safety I/O Modules suit lighted push-button applications.

SafetyNode G2 style module is IP67-rated for field-mounted applications with Yellow Flat Cable, while KE1 style is IP20-rated for enclosure applications on DIN rail. Each SafetyNode features 2 safe inputs and 2 standard outputs, and is compatible with Actuator Sensor Interface/Safety at Work networking applications. Suited for existing or new installations, modules can be used in light stacks...

Smart Power Modules suit low-power appliance motor drives.

Rated from 50 W to 3 kW, Motion-SPM(TM) 500 V multi-chip Models FSB50250 and FSB50450 each combine 6 fast recovery MOSFET's and 3 half-bridge high-voltage ICs in one thermally efficient, Tiny-DIP package designed for BLDC motors with built-in control. Gate-driver ICs offer high-isolation, 5 V CMOS/TTL interface and under-voltage lockout protection. High-speed level-shifting function permits...

Analog Voltage I/O Modules provide 1 kHz bandwidth.

Measuring 1.11 x 1.65 x 0.4 in., SensorLex(TM) 8B40/41 analog signal conditioners and 8B39 current output modules feature 1,500 Vrms transformer isolation and provide Instrument ClassÃ-® analog output. Products let users incorporate modular I/O on per-channel basis for any embedded monitoring or measurement and control system, interfacing with variety of analog signals as well as PC/104,...

DAQ Device connects to network at point of measurement.

Measurement Advantage(TM) Ethernet-based Model E-1616 includes 16 simultaneously sampled 16-bit analog inputs with sample rates up to 50 kS/s per channel and continuous module throughputs of 150 kS/s. It features 32 kilosample bursts up to 200 kS/s, along with 8 bits of digital I/O and one 32-bit counter. Suited for laboratory, test, and industrial monitoring and control applications,...

Bluetooth Products target cellular handset market.

Housed in 4.5 x 4.5 mm BGA package, UltimateBlue(TM) 0.13 micron Model SiW4000 EDR SoC is suited for high-volume mobile phone production. Model SiW3500 SoC is Bluetooth V2.0 qualified for interoperability with existing Bluetooth products. On-chip RF matching circuit facilitates direct on-board design. Model SiW1722 transceiver is designed and OEM-qualified for Bluetooth-enabled CDMA mobile phone...

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.