Modules

Open-Collector Relay Driver provides 96 channels.

Suited for driving and sensing external devices, Model SMP7500 features 12 groups of 8 bits, each group configured as input or output under program control or via front panel control line. I/O may be single buffered for real-time data access or double buffered to provide synchronized data. Each channel can sink 300 mA and includes built-in clamping diodes. Up to 192 channels can be accommodated...

Read More »

Power MOSFET Modules range from 50-600 A at TC = 80-

Offered in SP3, SP4, and SP6 packages, 100 V MOSFET Modules are available in single switch, buck, boost, dual common source, phase leg, full bridge, asymmetrical bridge, dual boost, and dual buck configurations. With 12 mm height for SP3 package and 17 mm height for SP4 and SP6 packages, modules exhibit minimal internal parasitic resistance and inductance. Applications include motor control,...

Read More »

High-Intensity LEDs are offered in various color options.

NovaBrite(TM) BWL Focused Beam Series, capable of displaying 6,500 K with 3 W input power in blue, red, green, yellow, and white, is also available as white, 120-lumen unit capable of handling up to 4.0 W. Offering alternative to incandescent and metal halide lighting, LED is available with single domed or flat lens with respective viewing angles of 60Â-

Read More »

Power Modules have IEC 60320 filtered Sheet F outlet.

Filtered Sheet F Outlet Accessory Power Modules are intended for indoor type equipment applications that could benefit from combination of filtering and ac power entry for detachable Sheet E power cords or cordsets in one component. RoHS-compliant modules, with max rating of 10 A (international) and 15 A (North American) @ 250 Vac, are configured with IEC 60320-2-2 Sheet F outlet and filter. They...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »

Power Entry Module targets medical applications.

Snap-in Model KFA universally supports range of panel thicknesses from 0.8-3.0 mm and offers compact system for 1U devices where load must be protected against overcurrent at power source. Approved for 1-10 A at 125/250 Vac, 50/60 Hz, module provides inlet, 1- or 2-pole shock-safe fusedrawer, and EMC filter. Fusedrawer is available in finger-grip or extra-safe version, which prohibits users from...

Read More »

I/O Accessories withstand harsh, industrial environments.

Series ZK1020 IP-Link Bridge Connectors and Series ZS5300 I/O Mounting Rails are suited for applications that require IP67-rated I/O terminals mounted outside of cabinet and directly on machines. Connectors are used for high-density, side-by-side Fieldbus Box I/O mounting where modules are 0-5 mm apart. Made of 1.5 mm thick stainless steel with pre-cut M3 threads to attach I/O modules, Mounting...

Read More »
Wireless Ethernet I/O Modules can be controlled remotely.

Wireless Ethernet I/O Modules can be controlled remotely.

Equipped with embedded JAVA web page, digital ADAM-6000W series uses wireless Ethernet standard 802.11b and supports Modbus/TCP and UDP protocols. Models ADAM-6050W/6051W/6060W feature inputs that can be configured to read frequency signal and act as counter, latching input, or normal input. Outputs can be configured as pulse, delayed, and standard outputs. Each unit allows 8 simultaneous web...

Read More »

D-Sub Connector interfaces between I/O and controllers.

Suited for industrial control and automation applications, IMDS Module is available with pluggable terminal blocks and either male or female D-Sub connectors. In standard 9-50 position D-Sub configurations, module mounts either on DIN rail or directly on panel. Six plated through holes per circuit allow users to modify module by adding electronic components, and 26-12 AWG terminal blocks are...

Read More »

Ethernet Module targets prototyping and production.

Based on Freescale Semiconductor ColdFire(TM) 66 MHz, 32-bit MCF5213 processor, Mod5213 is mounted onto 40-pin DIP and comes equipped with IDE, Project Manager, and fully preemptive RTOS. IDE integrates compiler, linker, and debugger supporting both C and C++. Fully static ColdFire core provides flexible power management with standby of 130 Â-µA and full-speed operating current below 50 mA....

Read More »

Bus Terminal I/O Devices communicate over Ethernet.

Suited for building automation, EIB Model KL6301 and LON Model KL6401 can be used to integrate HVAC sensors and actuators into bus terminal I/O system and into Ethernet networks or other fieldbus systems. Units can be connected to all Beckhoff controllers, such as BC, BX, and CX series of embedded PC controllers as well as high-end industrial PCs.

Read More »

All Topics