New Modules Products

Interface Module facilitates DAQ system communication.

Computer interface Model CP22 complements MGCplus multi-channel data acquisition system by allowing rapid communication from sensors. In addition to RS232 serial link, unit includes TCP/IP, 10/100 Mbit Ethernet interface, which allows transmission of over 150,000 measured values/sec, across 64 channels, each operating at 2.4 kHz sample rate. USB 1.1 interface enables transmission of more than...

I/O and Processor Modules target telecom manufacturers.

Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring Intel-® Pentium-® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in. chassis, Model...

Safety I/O Modules suit lighted push-button applications.

SafetyNode G2 style module is IP67-rated for field-mounted applications with Yellow Flat Cable, while KE1 style is IP20-rated for enclosure applications on DIN rail. Each SafetyNode features 2 safe inputs and 2 standard outputs, and is compatible with Actuator Sensor Interface/Safety at Work networking applications. Suited for existing or new installations, modules can be used in light stacks...

Smart Power Modules suit low-power appliance motor drives.

Rated from 50 W to 3 kW, Motion-SPM(TM) 500 V multi-chip Models FSB50250 and FSB50450 each combine 6 fast recovery MOSFET's and 3 half-bridge high-voltage ICs in one thermally efficient, Tiny-DIP package designed for BLDC motors with built-in control. Gate-driver ICs offer high-isolation, 5 V CMOS/TTL interface and under-voltage lockout protection. High-speed level-shifting function permits...

Custom Progressive Metal Stamping for Manufacturing EMI Shielding

A Guide to Containing EM Radiation Through Custom Progressive Metal Stamping

Analog Voltage I/O Modules provide 1 kHz bandwidth.

Measuring 1.11 x 1.65 x 0.4 in., SensorLex(TM) 8B40/41 analog signal conditioners and 8B39 current output modules feature 1,500 Vrms transformer isolation and provide Instrument Class-® analog output. Products let users incorporate modular I/O on per-channel basis for any embedded monitoring or measurement and control system, interfacing with variety of analog signals as well as PC/104, cPCI,...

DAQ Device connects to network at point of measurement.

Measurement Advantage(TM) Ethernet-based Model E-1616 includes 16 simultaneously sampled 16-bit analog inputs with sample rates up to 50 kS/s per channel and continuous module throughputs of 150 kS/s. It features 32 kilosample bursts up to 200 kS/s, along with 8 bits of digital I/O and one 32-bit counter. Suited for laboratory, test, and industrial monitoring and control applications,...

Bluetooth Products target cellular handset market.

Housed in 4.5 x 4.5 mm BGA package, UltimateBlue(TM) 0.13 micron Model SiW4000 EDR SoC is suited for high-volume mobile phone production. Model SiW3500 SoC is Bluetooth V2.0 qualified for interoperability with existing Bluetooth products. On-chip RF matching circuit facilitates direct on-board design. Model SiW1722 transceiver is designed and OEM-qualified for Bluetooth-enabled CDMA mobile phone...

Module provides multiple inputs in tight spaces.

Suited for controls in off-highway equipment and other vehicles, CANLink-® CL-202 solid-state, microprocessor-based module incorporates 16 switch-to-battery type inputs and 4 switch-to-ground harness codes that can be used for additional inputs. There are also input configurations for frequency and resistive dependant sensor inputs. Product is furnished with software code that allows it to read...

PCI DAQ Device features 200 kS/sec sampling rate.

Offering 16 channels of analog input with 16-bit resolution, NI PCI-6010 PCI plug-in data acquisition (DAQ) device features 2 analog output channels, 10 digital lines, and 2 counter/timers. It uses 37-pin D-Sub connector for I/O channel access and provides -

USB 2.0 Module is used for digital control and monitoring.

Model USB-DIO-32 lets users add portable, digital I/O and counter capabilities to any PC or embedded system with USB port. Compatible with USB 1.1 and 2.0 ports, device offers plug-and-play functionality and features 32 lines of TTL-compatible digital I/O on four 8-bit ports with 3 optional 82C54 counters/timers. Windows-based, custom function driver optimizes data throughput, and steel enclosure...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.