Safety Light Beam protects over long distances.
BeamSafe II-EP single-beam safety control has 140 ft range, making it suitable for perimeter and access guarding. It is housed in rugged cast aluminum enclosure that meets UL886, NEC articles 500, 501 and 502, and CSA. Control is rated explosion proof for Class I, Group C and D environments. Four separate visible indicators provide instant system status, as well as signal strength. Built-in lens...
Read More »
Plastic Wrap provides high visibility and distinctive feel.
Heli-Tube-® Spirally Cut Plastic Wrap applies like tape over stair railings, vertical posts, hoses, and electrical wiring. It is unaffected by fresh and salt water, and can be used for abrasion protection. Featuring safety orange, bright yellow, and glow-in-the-dark colors, in-plant applications include marking exit posts and stairway railings with signage that workers can see and feel. Wrap is...
Read More »
Resettable Devices protect control boards by limiting current.
PolySwitch-® LVR Series PPTC (polymeric positive temperature coefficient) devices are rated at 240 Vac, permitting maximum voltages up to 265 Vac, and are available in hold currents from 50 to 400 mA. Thermally active devices help protect against overcurrent and overtemperature faults on primary side of power supplies and transformers. Units come in straight-lead or kinked-lead configurations.
Read More »
Spiral Wrap protects cable and hoses.
Flame Retardant TectorGuard(TM) protects cables and hoses in mining, oil, and gas industries. It is approved by U.S. Mine Safety and Health Administration (MSHA) for use in underground mines. Double bevel on inside and outside edges prevents snagging or cutting. Standard color is black with optional colors and cuts available. Expanded line includes heavy-duty 4 and 6 in. versions.
Read More »
Material Selection Guide: High & Low Density Polyethylene
In this eBook, learn about high-density and low-density polyethylene's similarities, differences, and practical applications from New Process Fibre.
Read More »Circuit Breaker has across the line motor start approval.
Series 1658 thermal circuit breaker, with current ratings from 5 to 35A, is suitable for wiring systems up to 250 Vac or 28 Vdc. It features tease-free, trip-free, snap-action mechanism with push-to-reset or auto-reset actuation, thread-neck panel mounting, and optional water splash cover. Circuit breaker meets UL 1077 standard for supplementary protectors and UL 1363 standard for relocatable...
Read More »
Protective Spectacles meet ANSI and CSA specs.
CudaSpree(TM) Allsafe Safety Eyewear has adjustable nosepiece, 4-point adjustable cable temple for curved or straight fit, FogGard(R) Plus scratch resistant lens, sleek frame and lens for style and protection, and 6 base lens curve for wraparound protection. It is available with indoor/outdoor and standard lens options. Spectacles meet ANSI Z87.1 and CSA Z94.3 guidelines.
Read More »
Power Correction System uses active harmonic filtering.
MCC-mounted ACCUSINE(R) Power Correction System (PCS), with expandable, scalable filter, quickly reacts to harmonic waveforms to produce harmonic cancellation waveforms. System decreases harmonic-related overheating of cables, switchgears, and transformers. Response to load fluctuations begins in 40 microseconds, with 8 milliseconds for full response to step load changes. Device filters to 50th...
Read More »
Circuit Monitor detects oscillatory and impulsive transients.
POWERLOGIC-® Series 4000 permanently mounted circuit monitor with transient detection (CM4000T) automatically generates alarm so that action may be taken to correct problems before facility shuts down. It detects and captures oscillatory and impulsive transients (up to 10,000V peak, line-to-line) as short as 1 microsecond in duration. CM4000T maintains historical record of number of transients...
Read More »
UV-resistant Wrap provides abrasion protection.
Heli-Tube-® UV-Resistant Spirally Cut Polyethylene Wrap bundles and protects hoses against abrasion in outdoor environments where flexibility is required, and permits breakouts and anchoring. Featuring 1 1/2 in. OD size that can bundle hoses up to 10 in. dia, wrap is UL recognized and comes in 10 sizes ranging from 1/8 to l 1/2 in. It is unaffected by direct sunlight, fuels, oils, detergents,...
Read More »
Circuit Protection Devices are available in lead-free design.
NanoSMDM Series PolySwitch Devices feature gold-plated terminals and can be installed with both leaded and lead-free solders. Small form factor devices (1206) are available for operating currents of 0.5, 0.75, and 1.0A. They help protect circuits up to 6V from overcurrent surges of up to 40A. Units provide resettable protection in applications such as portable electronics, computers and...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
