Duct Hangers give large fabric duct inflated appearance.
Designed for larger fabric ductwork diameters in open architecture ceilings, 4x2 Suspension System(TM) simulates aesthetic inflated appearance even when heating/cooling air handlers are idle. Dual tension cables support duct clasps at 11 and 1 o'clock positions, while sculpted aluminum brackets support 10 and 2 o'clock positions with D-ring clips. Hanger system supports 50-60 in. dia...
Read More »
Motorized Linear Stages provide 0.1 µm resolution.
Available in 13 and 28 mm travel versions with metric or imperial mounting holes, Series T-LS can be controlled manually or through RS232 or USB port. Units can be used in X-Y or X-Y-Z configuration with AB90 angle brackets. Suitable as microscope stage, X-Y configuration, when combined with T-JOY3 Joystick Controller, allows manual control of X and Y axes from single interface and enables stage...
Read More »
LVDT Communication Module interacts with up to 254 units.
Electrically compatible with TEDS, Model 4215-LVDT Smart Indicator offers plug and play operation and can communicate with up to 254 Model 4215-L units on one serial communication bus. Model 4215-L is designed for measurement and control of 2-channel LVDT measurement fixtures. In addition to standard configuration, Model 4215-LVDT is capable of mixed transducer interfacing, including LVDT, DC...
Read More »Positioning Stages offer ball screw drive decoupling system.
Utilizing mechanical cross roller bearings for decoupling of ball screw drives, PMT 160 series stages achieve straightness and flatness runout of 50 nm or less. Decoupling system isolates any transverse movement of ball screw from linear bearing system and saddle of stage. Stages offer travel from 50-300 mm, with standard positioning accuracy of less than 10 Â-µm and repeatability of...
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »Piezo Stages suit scanning microscopy applications.
Compatible with various imaging acquisition packages, P-737 PIFOC® Piezo Z-Focusing Stage features up to 500 Â-µm travel, nanometer precise motion under closed-loop control, and set of LabView drivers with analog control option. It allows for millisecond sample settling, enabling Z-stack imaging with multiple objectives. Designed for biotech research microscopes using deconvolution and...
Read More »
Direct-Drive Rotary Systems suit various machining jobs.
Super-Precision® DD100/DD200/DD300 models incorporate frameless rare-earth permanent magnet torque motor, with no mechanical gearing, that wraps around spindle to eliminate need for separate motor extension. A ±.077 arc/sec resolution, ± 2.19 arc/sec accuracy encoder is mounted directly on spindle to provide accurate positioning. Direct-drive design eliminates backlash, enabling...
Read More »
Linear Translation Stages feature 2 nm linear resolution.
Incorporating non-contact, non-cogging direct-drive technology, ANT-LX Nanotranslation Crossed-Roller Stages come in 25 and 50 mm travel versions with ±0.3 Â-µm accuracy, ±0.05 µm repeatability, 5 g acceleration, 500 mm/s velocity, and max load up to 8 kg. Standardized, universal base-mounting pattern allows integration of 2, 3, or more axes, while 40 MHz electronic...
Read More »
Rotary Tables enable smooth, precise positioning.
Along with 4 in. dia tabletop and 4 x 5 in. footprint, RT4 series features black anodized aluminum construction with 303 SS worm and shafting with 464 Bronze gear. NEMA 17 stepper motor mount or hand crank models are standard, and ABEC 7 SS bearings and thrust washer help ensure smooth tabletop rotation. Offered in gear ratios of 45:1, 90:1, or 180:1, tables carry loads up to 100 lb and have 4...
Read More »Linear Bearings Prove Invaluable for Leading Drill Manufacturer
EAST PROVIDENCE, R.I. - May 15, 2008 - igus® Inc. today announced that DeepRock, one of the world's leading manufacturers of portable drilling rigs, uses DryLin® linear bearings on a unique automatic rod handling system. The machine-known as "Otto"-is designed to eliminate the need for winches and excessive manpower during the drilling process. DryLin R linear bearings, along with igus'...
Read More »
Absorbent Mat and Wipers are packaged in dispenser box.
Suited for workbenches, workstations, tool carts, lab tops, or any area prone to small spills and messes, PIG® Mat and Wiper Combo Pack contains 1 roll each of PIG® Universal Mat and PIG® All-Purpose Wipers for on-the-spot cleanups and wiping tasks. PIG® Mat is light-weight and soaks up small leaks, drips and spills, while abrasion-resistant PIG® All-Purpose Wipers...
Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.
Read More »
