New Plastic Tonelight Indicators Delivers Both Audible and Visual Warning Signal
The TRIP-LB200P Plastic Tonelight Indicators are suitable for alarms, low-voltage, low-pressure, high-radiation, dangerous conditions and liquid detector applications. The products feature four-position terminal blocks-two for RED LED and two for AUDIO ALARM. The indicators are offered with lens in standard (red) and optional colors (green, yellow, orange, blue and white). They can be operated in...
Read More »
OES Introduces XY Open Aperture Stage with Preloaded V-Groove and Crossed Roller Bearings
The AU200-100 x 100 XY Open Aperture Stage is designed for applications such as laser drilling, machining, medical, industrial, testing, scanning, alignment, assembly and optical applications. The stages’ table comes in 300 mm x 300 mm size whereas the aperture measures 188 mm x 188 mm size. The unit delivers resolution of 20 microns per each axis with a repeatability of 2 microns and position...
Read More »
Southwire Presents Maxis XD1 Circuit Puller with One-Person Set-Up and Operation
The Maxis XD1 Circuit Puller accepts 18V drills and delivers continuous pulling power up to 600 lbs and peak power of 1,000 lbs. The unit offers both strength under load and speed for performing the job on time.
Read More »
New L-408 Linear Motorized Translation Stages from Physik Instrumente Come with Anti-Crossed Roller Bearings
The L-408 Linear Motorized Translation Stages are designed for research and industry such as optics, bio-tech, and assembly of miniature components and photonics instrumentation. The units feature a leadscrew with 0.5 mm pitch and can handle payloads of 200 N. The stages provide a travel of 25 mm with 100nm minimal incremental motion. They deliver maximum velocity of 1-10 mm/sec and encoder...
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »
Packers Plus QuickFRAC® Limited Entry System Provides Higher Production for Operator in The Middle East
Calgary, Alberta, December 13, 2018 /PRNewswire/ -- Packers Plus Energy Services Inc. is pleased to announce a successful completion using the QuickFRAC® multi-stage completion system for an operator in the Middle East. A new configuration of the open hole, limited entry system was designed and implemented for the lowest cost with maximal operational efficiency and improved reservoir...
Read More »
New Sipart PS100 Positioner from Siemens Uses Latest Contactless Technology
The Sipart PS100 Positioner is offered in two enclosure variants such as polycarbonate and aluminum. The device automatically adjusts itself to the attached valve. It is equipped with an easy-to-read display, which allows user to see the status of the device. The contactless technology of the device is used for detecting the position of the valve. The positioner is offered with a...
Read More »
PI Introduces A-341 XY/XYZ Positioning Stage That Provides Dynamic Error Mapping
The A-341 Hybrid Gantry XY/XYZ Positioning Stage is offered with a frictionless air bearing guiding system and a unique hybrid bearing design. The stage offers 300 x 300 to 500 x 1000 mm XY travel and 2 m/sec maximum velocity. The product is equipped with absolute measuring encoders and ironless linear motors that eliminate cogging. The device is suitable for step and scan applications. It comes...
Read More »
New Positioning Systems from Pepperl+Fuchs Are SIL 3/PLe Compliant
Pepperl+Fuchs’s new positioning systems are safe and highly efficient, but less costly. They feature a single sensor for positioning. It has new superimposed Data Matrix codes, red and blue. The 2-D reader is also equipped with red and blue LEDs. The two-color Data Matrix codes, work together with two-color LEDs on the reader as the security solution. The system works with a variety of...
Read More »
H2W Presents New Voice Coil Positioning Stage with High Flux Density Neodymium Magnets
The VCS13-108-LB-01-MCF Voice Coil Positioning Stage is equipped with a NCC13-30-108-1SH motor that delivers a continuous and peak force of 48.0 N and 144 N respectively. The stage is offered with recirculating ball linear bearing and a load cell with a signal conditioner that offers push/pull force feedback of 1-100 N. It is suitable for applications such as vision inspection, position control,...
Read More »
New XYZR System from IntelLIDrives Features High Accuracy
IntelLIDrives’ new XYZR system is a multi-axes stage with a stable closed loop control system. Options include a control joystick, non-contact digital and analog output linear encoders, and motorization of the stage with stepper or brushless servo motors with encoders. This lift rotary system can be applied for scanning microscopy, wafer and pcb inspection, automated assembly and...
Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.
Read More »
