4mm Pitch Target Connector comes with flanged base.
Connectors

4mm Pitch Target Connector comes with flanged base.

4mm Pitch Target Connector is compatible with 858 series ruggedized spring loaded connector. Available in 2-6 positions in through-hole, SMT and SMT with alignment pin versions, Product comes in high temperature molded Nylon 46 housing and comes with flat or concave face on the mating side of the pins. Connector comes with tab holes, mounting tabs and pin length tolerance of ±.001 in. and...

Read More »
Bioprocessing Components from Qosina
Plugs and Stoppers

Bioprocessing Components from Qosina

Qosina carries a wide variety of bulk, non-sterile bioprocessing components that are in-stock and ready for immediate shipment. Our line of bioprocessing accessories includes Pharmafluor(R) tubing, barbed connectors and flanges, sanitary flanges, press-in barbed plugs, compression fittings, as well as tube and flange clamps in various sizes and colors to accommodate all of your project...

Read More »
DDHXA-75/100 Underground Puller comes with 3-speed gearbox.
Pullers

DDHXA-75/100 Underground Puller comes with 3-speed gearbox.

Featuring BOSS air compressor, Duct Dawg Air DDHXA-75/100 Underground Puller can pull up to 7,500 or 10,000 lbs. Unit is hydraulically driven and controlled wirelessly. Product comes in 16 ft footprint and uses CANbus technology. Underground Puller is suitable for utilities and contractors and comes with a 3-axis boom. DDHXA-75/100 is equipped with twin capstan bullwheels.

Read More »
V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.
Positioners

V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.

V-408 Linear Motor Stage is designed with high load capacity precision crossed roller elements with anti-creep cage assist. Delivering a velocity up to 1.5m/sec, unit’s linear encoder offers 10 nm resolution. V-408 is available in 1 in. and two in. models with 25mm and 50mm travel range and provides 20nm minimum incremental motion and geometric performance with 4µm straightness and flatness....

Read More »
Bridgeport's Innovative Solar Installation Solutions Help Electrical Contractors be More Productive and Profitable on the Jobsite
Pipe and Tube Hangers

Bridgeport's Innovative Solar Installation Solutions Help Electrical Contractors be More Productive and Profitable on the Jobsite

High-quality, high-performance products from Bridgeport are engineered to meet exacting demands of solar installations STRATFORD, Conn. (Aug. 28, 2017) – Electrical contractors, who are helping to build the renewable energy infrastructure, need high-performance, high-quality products to meet the demands of today’s solar installation projects. Addressing these contractor needs, Bridgeport...

Read More »
Single Rail Positioning Stage comes with 1-micron resolution encoders.
Positioners

Single Rail Positioning Stage comes with 1-micron resolution encoders.

Single Rail Positioning Stage H-Gantry features two bottom parallel axes with one cross axis. Unit is integrated with recirculating linear ball bearing system, custom mounting holes and home positioning sensor. Product’s axis uses H2W’s brushless linear motors and comes with a stroke length of 25.67 in. H-Gantry is equipped with 90-degree right angle gussets and custom extrusion end plates....

Read More »
U-723 Mini XY Stage is integrated with optical linear encoders.
Positioners

U-723 Mini XY Stage is integrated with optical linear encoders.

U-723 Mini XY Stage is powered by direct-drive ultrasonic piezoceramic motors. Unit is used for scanning and positioning applications and offers more than 0.8 in. travel per axis. Product comes with a foot print of 42x42 mm and features high speed motion up to 200 mm/sec. Mini XY stages’s encoder provides position feedback with 10 nanometers resolution. U-723 is compatible with mobile measuring...

Read More »
Strip Hanger is made from beige or black metal.
Hangers

Strip Hanger is made from beige or black metal.

Strip Hanger features covered-face sign holder to protect pricing tags. Designed for Power Zone® FlexRollerT self-facing system, unit is used to display two single-sided or one double-sided merchandising strip. Product comes with gravity feed design which uses integrated rollers for a self-facing experience.

Read More »
GB2 Ground Block Cylinders come with double seals.
Cylinders

GB2 Ground Block Cylinders come with double seals.

GB2 Ground Block Cylinders feature lube-free design, field immune cylinder switch and bi-directional mounting. Units are electrically insulated and pneumatically actuated. GB2 are offered in 25 and 50mm retract stroke lengths. Equipped with inline NPT regulator, products come with Class 2 copper adapter with a choice of smooth, knurled, or projection swivel head. Cylinders are suitable for thin...

Read More »
3-D Positioning System is suitable for positioning cameras.
Positioners

3-D Positioning System is suitable for positioning cameras.

3-D Positioning System consists of base that can attach to any flat surface, stepped and straight-through couplings and a precision shafting for easy adjustment and locking. System can accept ½ in., ¾ in., or 1 in. shaft that fit stepped and straight-through couplings. Unit’s shafts can be inserted at 90° or parallel and accepts tilt-and-swivel mount or other clamps and mounts. Product helps...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics