Material Processing Mills

Lab Attritor is designed for limestone grinding.
Material Processing Mills

Lab Attritor is designed for limestone grinding.

Able to process 200-500 lb of limestone/hr, CL-5 Stirred Vertical Ball Mill is suited for wet grinding limestone for flue gas desulphurization in power plants and for mineral grinding. Utilizing 2.5 gal of grinding media, it is equipped with variable frequency drive and 15 hp inverter duty motor. Attritors are top fed with product (approximately 6 mm) and water entering through the top of the...

Read More »
Material Processing Mills

Solids Processing Solutions Available at Process Expo 2009 in Las Vegas

QUADRO ENGINEERING CORP. - BOOTH NO.: 7407, will be showcasing a range of their solids processing equipment at Process Expo 2009, in the Las Vegas Convention Center (October 5 - 7, 2009). For laboratory, research and development work, Quadro will be featuring the Quadro® Comil® U5 lab model. Quadro's versatile laboratory lines allow scalable repeatability, emit low heat and dust,...

Read More »
Singular Device lets users shakeout and reclaim sand.
Material Processing Mills

Singular Device lets users shakeout and reclaim sand.

Designed to remove and reprocess sand, VIBRA-CLAIM(TM) combines proprietary shakeout design with processing capabilities of VIBRA-MILL® sand reclaimer. This functionality enables sand separation and reclamation, all in one step, and can eliminate need for larger equipment. In addition to increasing production rates and reducing material handling/sand expenses, shakeout and attrition mill...

Read More »
Quadro Engineering Corp. Develops CIP Fine Grind F10 Mill
Material Processing Mills

Quadro Engineering Corp. Develops CIP Fine Grind F10 Mill

Quadro's continuing efforts to innovate process technology in the field of fine grind size reduction are once again realized with the development of a Clean-In-Place F10 Fine Grind Mill. Quadro's F10 Fine Grind Mill has been succesfully implemented in Pharmaceutical, Biotech, Fine Chemical and Food industries where PSD targets range from 5 - 150Â-µm. The addition of a Clean-In-Place design...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Definer® an Advanced Ultra- Sanitary Mill
Material Processing Mills

Definer® an Advanced Ultra- Sanitary Mill

The Definer is a versatile, ultra-sanitary, mill with the processing capabilities of several mills in one. This unit easily reduces a variety of powders and agglomerates to a controlled output particle size. It is uniquely designed to meet the special demands of the pharmaceutical, food, dairy and chemical industries. The Definer is a fully enclosed, dust tight unit constructed entirely of...

Read More »
Indexable Insert Grades are designed for dry milling.
Material Processing Mills

Indexable Insert Grades are designed for dry milling.

Models KC915M (KCK15) and KC935M (KCPK30) are available for machining steel, cast iron, and stainless steel workpiece materials. Dry-milling grade, KC915M (KCK15) is designed for all applications in grey cast iron and grey cast iron with nodular graphite, and can also be used to finish-mill low-alloyed steel. KC935M (KCPK30) suits applications in plain and alloyed steel, stainless steel, grey...

Read More »
Attritors can be used either as wet/dry grinding mill.
Material Processing Mills

Attritors can be used either as wet/dry grinding mill.

By changing shaft/arm assembly and bottom discharge, S-50 Batch-type Attritor offers flexibility of grinding either wet or dry. Unit can grind variety of products from ceramics and carbides to inks and chocolate, when operated as wet grinding mill. When operated as dry grinding mill, SD-50 can be used in applications ranging from metal powders to mechanical alloying, pigments, glass frits, and...

Read More »
Material Processing Mills

NETZSCH Bead Mills Grind Nanoparticles to Improve Lithium Ion Battery Function

EXTON, Pa., April 29, 2009 - With the cost of lithium ion batteries falling and their efficiency levels being greater than traditional car batteries, automobile manufacturers are closer than ever to making electric cars affordable to the general public. Nanoparticles used in the development of these new batteries help deliver the highest energy and power capacities, and longer running times while...

Read More »
Material Processing Mills

Quadro Showcases a Full Range of Solids Solutions from Lab to Production at Achema 2009 (Hall No.: 6.0, Stand No.: F7-F10)

Quadro Engineering will be showcasing their full range of solids processing solutions at the upcoming Achema Exhibition, being held May 11 - 15, 2009, at the Exhibition Grounds of Messe Frankfurt GmbH, in Frankfurt am Main, Germany. For laboratory, research and development work, Quadro will be featuring the Quadro® Comil® U3 and U5 lab models. Quadro's versatile laboratory lines allow...

Read More »
Material Processing Mills

Cryogenic Grinder has integrated liquid nitrogen cooling.

Completely enclosed to ensure user safety, CryoMill has integrated liquid nitrogen cooling system. Grinding chamber is continuously cooled before, during, and in-between grinding cycles at constant -196°C, and Autofill system ensures safe draws-in of liquid nitrogen. With frequency up to 25 Hz, system offers grind down to 5 Â-µm and contains one grinding station with option of 25, 35,...

Read More »

All Topics