Machinery

Greenerd Builds Three Hydraulic Presses for Automotive Parts Manufacturing Facility in Mexico

Greenerd Builds Three Hydraulic Presses for Automotive Parts Manufacturing Facility in Mexico

Hydraulic Presses Form, Trim and Pierce Complex 3-D Heat Shield bodies. NASHUA, NH U.S.A. – Greenerd Press & Machine Company, Inc. (http://www.greenerd.com/) announced they recently designed and built three hydraulic presses for a global automotive parts manufacturer. The presses were installed in a new assembly line application set up in a Mexican facility. The gap frame presses feature...

Read More »
Product Verification System inspects 200,000 softgels/hour.

Product Verification System inspects 200,000 softgels/hour.

Designed to verify softgels continuously, in-line after single encapsulator or off-line in batch mode, VeriSym SE Optical Inspection System detects color, size, and shape and removes defects such as spots, color variations, air bubbles, and misshapen softgels. When defective product or unconfirmed object is identified, system activates close-coupled high-speed air ejector system to remove it from...

Read More »
Upgrade Service creates Green SMT placement machine.

Upgrade Service creates Green SMT placement machine.

To build iico system, Europlacer starts with pre-owned EP600 or Progress6 placement system, exchanges critical mechanical parts, and installs encoders on X and Y axis. Nozzles are changed for Smart nozzles, andÂ- complete head is changed and fit with 8-position turret head with optical sensors and digital cameras. Additionally, system gets new cover with flat screen/control panel, and PC is...

Read More »
Renowned Newport Shipyard Purchases Marine Travelift 500c for Its Celebrated Rhode Island Facility

Renowned Newport Shipyard Purchases Marine Travelift 500c for Its Celebrated Rhode Island Facility

New Machine Joins Shipyard's Existing Marine Travelift 100 BFM II Mobile Boat Hoist STURGEON BAY, WI – Marine Travelift Inc. announced today that Newport Shipyard of Newport, Rhode Island, has purchased a 500C mobile boat hoist to replace a 300-ton Marine Travelift hoist the yard purchased in 2000. Scheduled to be installed later this year, the new machine will complement a Marine Travelift 100...

Read More »
Cut/Clamp/Restart Module increases productivity, throughput.

Cut/Clamp/Restart Module increases productivity, throughput.

CCR changing system automatically exchanges fresh cut/clamp/restart (CCR) unit whenever needed on fiber placement machines, eliminating downtime and allowing machines to maintain full production rates. This increases machine utilization on part production through minimized interruption of part layup. One end effector is automatically exchanged for second that processes same width material...

Read More »
Equipment from Clean Room Devices Permits High-Speed Assembly of Medalist-® Medical TPE Tubing and Tapered-Barb Fittings

Equipment from Clean Room Devices Permits High-Speed Assembly of Medalist-® Medical TPE Tubing and Tapered-Barb Fittings

Automatic System Demonstrated at MD&M West Yields a Stronger Fit between TPE Tubing and Connectors than Is Achieved with Solvent Bonding of PVC Tubing ANAHEIM, CA, U.S.A - An automatic fitting inserter developed by Clean Room Devices, LLC enables medical product manufacturers to obtain the advantages of MedalistÂ-® elastomers over PVC while increasing productivity in the assembly of tubing...

Read More »
Drilling Technical Services Develops Die Cut Thin Film Blank Accumulator with Siemens Motion Control

Drilling Technical Services Develops Die Cut Thin Film Blank Accumulator with Siemens Motion Control

VR Series cut and stack accumulator utilizes leading-edge motion control products to efficiently transfer film blanks from point of cutting to positioning in counted stack As a machine builder specializing in the design, engineering and system integration of narrow and mid-web label solutions as well as flexible packaging and folding carton machinery, Drilling Technical Services (DTS) of Milford,...

Read More »
Radiant Energy Systems Exhibits at ICE USA, Orlando Florida

Radiant Energy Systems Exhibits at ICE USA, Orlando Florida

HAWTHORNE, NJ - The eagerly awaited, biennial International Converting Exhibition takes place at the Orange County Convention Center in sunny Orlando, Florida April 9-11th. Visitors to ICE USA will have the opportunity to see firsthand, the latest technological advancements in a wide range of converting machinery along with ancillary products and supplies. Radiant Energy Systems is exhibiting...

Read More »
Hurco to Stress Breadth of Machine Range for Producing Prismatic and Turned Parts

Hurco to Stress Breadth of Machine Range for Producing Prismatic and Turned Parts

The main theme of Hurco's participation at MACH 2012 will be to show how much the company's machine tool range has expanded in a relatively short time. Nine representative machines from the company's vertical machining centre and CNC lathe programmes will be on show. There will also be a 5-axis, high-speed machining centre from Roeders, Germany, for which Hurco acts as sole agent in the UK and...

Read More »

Boring Machine can bore door lock/latch holes in any location.

Adjustable to accommodate lengths from 5-32 in., Lock Block Boring Machine is designed to bore lock and latch holes in lock blocks for insertion into production door makeup. Touchscreen enables operator to set hole location, turn on appropriate motors, and troubleshoot any problems that arise. Capable of processing up to 3.7 doors/minute with up to 9 holes/door, machine bores holes from both...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics