Lubricants and Cleaners eliminate pressurized propellants.
Cleaning Equipment

Lubricants and Cleaners eliminate pressurized propellants.

Sprayon® Liqui-Sol(TM) MRO lubricants, cleaners, and maintenance products offer re-useable, adjustable spray triggers. Triggers allow users to dial in specified coverage, from fan spray to pin stream. To recylce/dispose of containers, users remove (and reuse) spray trigger and recycle empty can as scrap metal or dispose of it as non-hazardous waste. Sprayon Liqui-Sol containers come in 14...

Read More »
Cutting Fluid works on metals to 45 Rockwell.
Metalworking Fluids

Cutting Fluid works on metals to 45 Rockwell.

Tap Magic Xtra-Thick heavy-duty cutting fluid is suited for machining work on inconel, titanium, and stainless steel. Fluid eliminates work hardening and ensures single application stays with tool and work piece for cuts of long duration. Clinging action is suited for reaming, lathe, and mill work. Xtra-Thick contains EP-X3 and is offered in sizes from 16 oz to 55 gallons.

Read More »
Anti-Seize Compound handles high temperatures.
Anti-Seize

Anti-Seize Compound handles high temperatures.

Industrial grade 550(TM) has -65 to 2400°F temperature rating, making it suitable for high temperature applications in ethylene and acetylene piping, heat exchangers, and cat cracker connections. Formula is free of sulfur, lead, copper, and other environmentally undesirable metals. Its molybdenum disulfide content provides low coefficient of friction for rough-cut threads made of cast iron,...

Read More »
Penetrants

Penetrant/Lubricant loosens frozen parts.

ShuR-BusT penetrant, lubricant, and demoisturant immediately cuts through dirt, rust and scale to get into parts that have been frozen by or encrusted with corrosion and oxidation. It leaves protective shield-like film, and seals out water to prevent moisture and corrosion. ShuR-BusT will not ignite and will not dry or harden. It penetrates through water when sprayed on boat motors and submerged...

Read More »
Grease

Greases suit extreme environmental conditions.

Molub-Alloy® 6040 greases are formulated with petroleum base oils using calcium-complex sulfonate thickener. They are compounded with additives for extreme pressure characteristics and thin-film, high-pressure, antiwear protection. Greases resist corrosion, making them suitable for aggressive process water environments. Resistance to oxidation allows them to remain pliable and prevents...

Read More »
Lubricants for use in food processing plants.
Lubricants

Lubricants for use in food processing plants.

Nevastane® formulas include lube, hydraulic, and compressor oils offered in synthetic, semi-synthetic, mineral base, emulsifiable, semi-fluid, grease, and spray formulations. Used to lubricate or to act as anti-rust film on equipment and machine parts, all formulas are NSF and USDA registered H-1 for incidental contact with food. Also available: Wet Lube 100 emulsifiable lubricant,...

Read More »
Cutting Fluids suit specific metal demands.
Metalworking Fluids

Cutting Fluids suit specific metal demands.

Honey-like TrueTap(TM) HD, for severe applications, clings to cutting tools. TrueTap(TM) Foamy aerosol foams on contact with cutting tool, penetrating deep into cut. TrueTap(TM) LV, for re-circulating coolant pumps, floats on surface for skimming. Biodegradable TrueTap(TM) NTL is non-irritating to eyes, skin, and respiratory tract. Water-soluble TrueTap(TM) Aqua replaces solvent or oil-based...

Read More »
Anti-Seize

Anti-Seize Lubricant protects against fresh or salt water.

Marine Grade Anti-Seize Lubricant protects assemblies exposed to high humidity conditions or direct contact with fresh or salt water. It reduces wear and protects against galling and corrosion in high-pressure applications, and resists wash-out from water spray. Lubricant is ideal for variety of fasteners and joints, or as dressing for water pump gaskets and flanges in marine and other...

Read More »
Fluids last 10 times longer than competitive lubricants.
Lubricating Oils

Fluids last 10 times longer than competitive lubricants.

Molykote® Compressor and Vacuum Pump Fluids are comprised of formulations of synthetic polyalpha olefin (PAO), polyalkylene glycol/polyolester (PAG/POE), polyolester (POE), diester (DE), and ultra high-purity mineral oils. Their engineered chemistry makes them resistant to oxidation and emulsification. Molykote oils are available in pour points down to -80°F, with range of viscosity...

Read More »
Lubricant loosens frozen metal parts.
Solid Film Lubricants

Lubricant loosens frozen metal parts.

Kroil chemical lubricant can creep into millionth in. spaces, dissolving grease and carbon, breaking bonds of rust, and supplying necessary lubrication to loosen frozen metal parts. It is available in 1, 5, 15, and 55 gal sizes. Aerokroil aerosol version offers same lubricating powers and is available in 10 and 13 oz cans.

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics