Non-Aerosol Light Oil Lubricant resists corrosion.
Lubricants

Non-Aerosol Light Oil Lubricant resists corrosion.

Sprayon® 711 Liqui-Sol(TM) packaging features reusable spray trigger with adjustable spray dial that enables fan spray to pin stream. Sprayon 711 penetrates, lubricates, demoisturizes, and inhibits corrosion while offering dielectric strength of 47,000 volts. NSF approved and H2 rated, Sprayon 711 meets requirements of MIL-C-23411 and Naval Ordinance Systems Weapons Specs WS-14138. Product...

Read More »
Grease

Greases keep equipment lubricated in wet environments.

Available in NLGI Grades 1 and 2, Mobil Centaur Moly greases are formulated with calcium sulfonate thickener technology to deliver water resistance and protection from corrosion and pressure. Greases are designed for equipment that operates in wet environments or is subjected to demanding conditions such as heavy loads and severe sliding. Applications include heavy-duty truck chassis, heavily...

Read More »
Synthetic-Based Lubricants provide cold-weather protection.
Lubricants

Synthetic-Based Lubricants provide cold-weather protection.

ANDEROL® PumpJack 150, formulated to optimize pump-jack energy efficiency and performance, decreases energy consumption and minimizes maintenance expenditures in cold-weather environments. It provides wear and rust protection and oxidation stability. ROYCO 800 compressor lubricants are formulated with pour points as low as -55°C to provide cold-weather protection for critical...

Read More »
Anti-Seize Compound is formulated for continuous use.
Anti-Seize

Anti-Seize Compound is formulated for continuous use.

SAFEKOTE 60(TM) heat transfer and anti-seize compound has base carrier that remains intact at 600°F on cartridge heaters and on threads and at 500°F when exposed to air in heater bands. Available in 12 oz jars with brush top lid, product ensures consistent heat transfer and has anti-seize properties suited for threads on end cap bolts, screw tips, and nozzles. Even at temperatures above...

Read More »
Dry Film Lubricant prevents galling.
Solid Film Lubricants

Dry Film Lubricant prevents galling.

Suited for external and internal threaded parts, NYPLATE® anti-seize coating facilitates disassembly, even in aggressive environments and after heat exposure up to 1292°F. Non-toxic, environmentally-safe process forms dry, tack-free film lubricant with sealing properties. It seals immediately upon installation, prevents corrosion in installed condition, offers chemical resistance when...

Read More »
Copper Anti-Seize withstands temperatures to 1,800°F.
Anti-Seize

Copper Anti-Seize withstands temperatures to 1,800°F.

Heavy-duty, environmentally preferred anti-seize provides maximum protection against galling, seizure, and heat welding. With -65 to 1,800°F temperature range, KOPR-KOTE is NSF H-2 approved, meets MIL-PRF-907E specifications, and contains no lead, zinc, PTFE, or materials that may be affected by elevated temperatures. Copper flake, graphite and other extreme pressure corrosion and anti-wear...

Read More »
Lubricating Oils

Synthetic Oils are formulated for gas turbines.

Mobil SHC 800 Series oils improve turbine cleanliness and help extend drain/service intervals for stationary gas turbines. They offer rust protection, deposit control, and water separating ability, all of which aid in minimizing maintenance and equipment problems. Products are formulated using wax-free, synthesized hydrocarbon fluids suited for use in turbines that operate constantly in extreme...

Read More »
Cleaners and Lubricants suit industrial environments.
Cleaning Compounds and Chemicals

Cleaners and Lubricants suit industrial environments.

Cold Galvanize 99% protects against rust and corrosion on ferrous bar metal and previously galvanized surfaces. White Lithium Grease multi-purpose, all-weather, penetrating lubricant is water-resistant and contains rust and oxidation inhibitors. Extreme Duty Silicone helps eliminate sticking, binding, and squeaking. Heavy Duty Degreaser and Motor Cleaner helps clean electrical components and...

Read More »
Lubricants

Food-Grade Lubricant Paste is NSF H1-approved.

Molykote® P-1900 mineral oil-based paste can lubricate sliding surfaces and friction contacts exposed to heavy loads, especially at low to medium speeds. It offers water resistance, low coefficient of friction, and service temperature of -30 to 300°C. Molykote P-1900 is available in 400 g cartridges, 1 kg cans, 25 kg pails, and 180 kg drums.

Read More »
Protective Lubricant is suited for large surface areas.
Lubricants

Protective Lubricant is suited for large surface areas.

Able to deliver product quickly and efficiently, WD-40 Big Blast utilizes wide-area spray nozzle, which allows user to cover larger surfaces in less time. Machinery and equipment covered with WD-40 receive protective coat that stops rust, shields against moisture, and prevents corrosion. Treatment, when used on heavy machinery, cleans and protects surfaces, penetrates stuck bolts, and lubricates...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics