Hard Metal Turning Made Easy
Chain and Bearing Lubricators

Hard Metal Turning Made Easy

With ChilAire Lite(TM) CO2 Cooling, Lubrication and Chip Extraction hard metal turning is easy. Turn carbides or titanium in a fraction of the normal time with higher feed rates, longer tool life and superior heat removal. And you will enjoy the benefits of no fluid waste, no staining and a better part finish. The ChilAire Lite(TM) system features a Cleaning-Coolant Spray Generator/Controller, a...

Read More »
Metalworking Fluids

Neo-Synthetic Metalworking Cutting Fluids Boost Productivity

Neo-Synthetic cutting fluids are heavy duty coolants suitable for all machining needs including difficult to machine metals. These chemically engineered fluids exhibit outstanding machining performance whatever the severity of the operation. Neo-Synthetic cutting fluids were developed by Precision Fluids of Houston, TX. Machining cutting fluids must cool and lubricate the cutting tool and come in...

Read More »
Spray protects laboratory instruments during autoclaving.
Coatings

Spray protects laboratory instruments during autoclaving.

Dual purpose Barrier Milk(TM) Ready-to-Use Spray (PC 0139) helps prevent corrosion of instruments and lubricates box locks and hinges to keep them in good working condition. Water-based blend of lubricants and corrosion inhibitors is applied with fine mist that covers instruments and works its way into hinges and box-locks. Leaving instruments free of any residue, it is non-irritating, phenol and...

Read More »
Metalworking Fluids

Metal Cutting Fluids resist bacteria and foaming.

Suited for machining and grinding ferrous and non-ferrous alloys, semi-synthetic Multan® B 236(TM) and B 414(TM) can be used continuously for years with minimal biological degradation. Multan® B 236(TM) is intended for cast iron and steel, which require rapid cooling, corrosion protection, and moderate lubrication. Multan® B 414(TM) is similar but contains more oil and...

Read More »
Boeing Approves TRIM® MicroSol® 585 and TRIM® E917 for Aerospace
Metalworking Fluids

Boeing Approves TRIM® MicroSol® 585 and TRIM® E917 for Aerospace

MicroSol 585, a nonchlorinated, semisynthetic metalworking fluid, and E917, a low-foam, high-lubricity emulsion, have received Boeing process spec number BAC5008 approval for areas 5 and 6, which includes machining titanium alloys. Perrysburg, Ohio April 23, 2009 - Master Chemical Corporation is pleased to report that MicroSol 585, a nonchlorinated semisynthetic metalworking fluid, and E917, a...

Read More »
Rustlick PowerSaw Superior Synthetic Fluid Designed for Sawing Applications
Metalworking Fluids

Rustlick PowerSaw Superior Synthetic Fluid Designed for Sawing Applications

Glenview, IL - April 15, 2009 - Rustlick PowerSaw is a heavy-duty, synthetic fluid formulated for band and circular sawing applications. It contains advanced lubricants and is designed with a high level of non-chlorinated E.P. additives to extend blade life and reduce machine wear. Rustlick PowerSaw is highly resistant to bacteria and fungus as well as superior tramp-oil rejection for...

Read More »
MQL (Minimum Quantity Lubrication) "Green Machining" Improves Part Quality, Cuts Piece Processing Cost for Ford Van Dyke Transmission Plant
Machining Centers

MQL (Minimum Quantity Lubrication) "Green Machining" Improves Part Quality, Cuts Piece Processing Cost for Ford Van Dyke Transmission Plant

Nearly dry MQL machining slices seven figures from initial system cost for unneeded coolant tanks and high-pressure supply systems, reduces operating costs, and improves plant air quality April 2009 - "Green machining" has a double meaning at Ford Motor Company's Van Dyke Transmission Plant in Sterling Heights. Recently installed MQL (minimum quantity lubrication) machining systems from MAG...

Read More »
Kluber Offers Innovative Lubrication Solution for Wind Power
Grease

Kluber Offers Innovative Lubrication Solution for Wind Power

Londonderry, NH - (March 25, 2009) - Kluber Lubrication, a worldwide manufacturer of specialty lubricants, will showcase three innovative, specialty lubricants for the wind power industry at the WINDPOWER 2009 trade show May 4-7 in Chicago, IL. The lubricants are Kluberplex® BEM 41-141, Kluberplex® AG 11-462 and Klubersynth® GEM 4-320 N. Kluberplex BEM 41-141 is high-performance...

Read More »
Metalworking Fluids

New Beyond(TM) Tooling from Kennametal Makes Money-Losing Job a Winner for Mecon Industries

(SCARBOROUGH, ONTARIO, CANADA) - Difficult jobs can be a reminder why it's good to keep up with the latest cutting-tool advances. For Mecon Industries (Scarborough, Ontario, Canada), new Beyond(TM) tooling from Kennametal was the difference between potential failure on a job no one could cut to delivering the part on time as promised. Beyond is Kennametal's newest line of tooling, a complete...

Read More »
Lubricants

Petro-Canada Launches EcoSia(TM) Product Line ...

Mississauga, Ontario, Canada - March 30, 2009: Petro-Canada today announced their new EcoSia brand, a suite of products from their current line-up which possess environmentally-friendly characteristics. The EcoSia line will make it easier for lubricant customers to identify those products that meet their environmental goals without compromising performance. The product offering spans a diverse...

Read More »

All Topics