Introducing New Mobil DTE 10 Excel Series
Hydraulic Fluids

Introducing New Mobil DTE 10 Excel Series

A new standard in energy efficient productivity The new Mobil DTE 10 Excel Series is engineered to better address the lubrication demands of a new generation of high-pressure industrial and mobile equipment - helping you reduce power consumption and increase machine output surpassing even our standard-setting Mobil DTE 20 Series and Mobil DTE 10M Series hydraulic oils. A product of the latest in...

Read More »
Dry Film Lubricant is fortified with molybdenum disulfide.
Solid Film Lubricants

Dry Film Lubricant is fortified with molybdenum disulfide.

With ability to withstand extreme pressures, temperatures up to 650°F, water, and chemicals, CRC Quick Dry Moly Lube fills pores of metal surfaces to provide dirt repelling barrier that protects surfaces from pressure and friction. Available in 16 oz aerosol can (part #03043), EPA regulatory compliant solution does not contain any known Ozone Depleting Chemicals. It can be applied on...

Read More »
Minimum Quantity Metalworking Lubricant suits stamping applications.
Metalworking Fluids

Minimum Quantity Metalworking Lubricant suits stamping applications.

Water-based Accu-Lube Synthetic II lubricant is formulated with non-chlorinated extreme pressure and boundary lubrication additives to produce high-quality parts in moderate-duty operations with ferrous and nonferrous metals. While safe for the environment, product offers corrosion protection and performs well in operations where high friction is generated. Accu-Lube Synthetic II is available in...

Read More »
Metalworking Fluids

New Neat Cupper Lubricant from Quaker Chemical Quickly Becoming Market Leader

CONSHOHOCKEN, Pa. - A new neat cupper lubricant from Quaker Chemical is quickly becoming recognized by global Can industry as one of the best products on the market, due to its high lubrication performance. Quaker Chemical has offered a neat cupper lubricant to the global Can market since early 2009. However, their new QUAKEROL® Q30LV(E) uses an in-house ester that was developed based on...

Read More »
Water-Soluble Coolants are safe for all metals.
Electrical Oils

Water-Soluble Coolants are safe for all metals.

Formulated with chlorinated and non-chlorinated EP additives, respectively, Rustlick PowerCool MaxLife and PowerCool MaxLife CF coolants provide biostability and performance for heavy-duty cutting and grinding applications. They can be used on ferrous/non-ferrous metals, aluminum, brass, bronze, and copper. Available in 5 or 55 gal containers, products suit wide range of low to heavy-duty...

Read More »
Water Soluble Metal Cutting Oil has no harmful additives.
Metalworking Fluids

Water Soluble Metal Cutting Oil has no harmful additives.

Formulated with Extreme Pressure additive, CYCLE HD is suited for moderate to heavy-duty machining of ferrous and non-ferrous metals. Product resists bacteria, extending sump life and providing odor control. Fluid is prepared with small oil droplets that prevent separation of oil from water, which leads to stable emulsion. Low foaming and low misting, CYCLE HD offers optimal performance in...

Read More »
Lubricating Oils

SENTRON(TM) LD 5000 Approved for Use in GE Jenbacher Type 2, 3, and 6 Engines

Mississauga, Ontario Canada - After accumulating more than 10,000 hours of service in each of two field trials, Petro-Canada Lubricants today announced that its SENTRON LD 5000 premium natural gas engine oil has been approved by GE Jenbacher for use in all of their Type 6 engines fuelled by natural gas. The field trials were conducted in GE Jenbacher J620 and J420 engines up to 20 bar used in CHP...

Read More »
Metalworking Fluid uses synthetic ester technology.
Metalworking Fluids

Metalworking Fluid uses synthetic ester technology.

Optimized for high-tech ferrous metals including stainless steel and Inconel®, TRIM® C380 targets aerospace, medical, and electronics industries. Combination of synthetic ester technology and non-halogenated EP package produces high levels of lubricity at point-of-cut. Low-foam detergents keep process soils from redepositing on machines and parts. Low odor and low mist, C380 contains...

Read More »
Metalworking Fluids

High-Speed Machining and High-Quality Metalworking Fluids ... The Perfect Pair

Metalworking fluid performance directly impacts Aluminum high-speed machining CONSHOHOCKEN, PA - Metalworking fluid manufacturers are watching as the high-speed machining (HSM) trend continues to grow in the Aluminum engine and transmission industry. As competition increases, engine and transmission manufacturers continue to turn to HSM for its gains in productivity, improvement in the machining...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics