CIMTECH® 46C Metalworking Fluid Is Approved by Boeing for Aerospace Manufacturing
Metalworking Fluids

CIMTECH® 46C Metalworking Fluid Is Approved by Boeing for Aerospace Manufacturing

Cincinnati, Ohio - CIMTECH® 46C Metalworking Fluid, one of CIMCOOL Fluid Technology's extensive line of metalworking fluids, has BOEING approval under BAC 5008REVr - Areas 5 and 6, including titanium alloys. The approval number is BOEING PSD 6-124. CIMTECH 46C is recommended for moderate duty grinding of hard metals such as cobalt, stellite and titanium alloys, including chrome plated and...

Read More »
PTFE Dispersions in IPA are designed as dry film lubricant.
Solid Film Lubricants

PTFE Dispersions in IPA are designed as dry film lubricant.

Available as 25%, 15%, and 5% dispersions in isopropyl alcohol (IPA), McLube PTFE (polytetrafluoroethylene) Dry Film Dispersions provide low coefficient of friction and have average particle size of less than 10 microns. Products are chemically inert and can can be applied to metal, plastic, rubber, leather, and fabric surfaces. Thermally stable to 6,150°F, dispersions are supplied as...

Read More »
Grease

Greasing Equipment in Some of the Most Demanding Environments

Shell's newly revamped Gadus grease range is designed to perform even in the hottest, coldest and wettest places on Earth and is used in some of the largest marine applications, fastest trains and biggest mines LONDON, - Shell Lubricants has launched a new, improved range of Shell Gadus greases. The range is designed to meet the challenges of the biggest, fastest and largest equipment in...

Read More »
Grease

Synthetic Fluid Gear Grease is NSF H1 registered.

Based on refined synthetic hydrocarbon and special calcium complex soap thickener, KlÃ-¼berfood NH1 94-6000 is safe for incidental, technically unavoidable food contact. Product provides wear and corrosion protection as well as water resistance. Applied through central lubrication systems, Klüberfood NH1 94-6000 can be used as gear grease for immersion lubrication of toothed and worm...

Read More »
Grease

Synthetic Lubricant is used on plastic parts inside cars.

Developed for lubrication of plastic parts inside cars, Klübersynth RA 44-702 mechanically dampens and reduces noise of slowly moving parts. Fully synthetic, high-viscosity grease does not contain any silicone, has no odor, and can be used for plastic/plastic and plastic/metal material pairings. Resistant to abrasion, product helps reduce oscillation, noise, and vibration. It has been tested...

Read More »
Synthetic Lubricant complies with FDA and USDA H1 regulations.
Lubricants

Synthetic Lubricant complies with FDA and USDA H1 regulations.

Compatible with all components of standard rotary compressor systems, PristineFG(TM) is intended for food processors and packagers, beverage bottlers, and pharmaceutical manufacturers. Product provides optimized lubrication at high and low temperature variations and under extreme conditions often found in processing plants. Formulated to provide low volatility and non-foaming characteristics,...

Read More »
Lubricants

Adhesive Chain Lubricant inhibits corrosion, reduces load stress.

Available in 16 oz aerosol can, TAC 2(TM) bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that causes metal fatigue. Included tackifier enables lubricant to cling to metal surfaces without increasing viscosity, while formula penetrates and thoroughly coats vital chain pin and bushing areas. Operating effectively in temperatures to 350°F...

Read More »
Fuel/Oil Additive completely removes engine carbon deposits.
Additives

Fuel/Oil Additive completely removes engine carbon deposits.

When added to fuel, CRC® MOTOR TREATMENT cleans fuel injectors, carburetor jets, intake valves, and pistons. It also lubricates upper cylinders, cures hesitation and pings, and restores power and pick-up. When added to oil, multitasking additive liquefies built-up gum and varnish and releases carbon deposits. It cleans sticky valve lifters, piston rings, and PCV systems slowly, during vehicle...

Read More »
Lubricating Oils

AeroShell Ascender Marks Successful Flight Operations with TAM Airlines

Innovative lubricant formulation developed by Shell provides key performance benefits for aviation customers Shell Aviation's High Performance Capability (HPC) turbine engine oil - AeroShell Ascender has reached yet another milestone in the aviation industry with successful commercial flight operations with the main Brazilian airliner, TAM Airlines. The inaugural flight took off on December 2,...

Read More »
Release Agents

Cleaner/Lubricant/Penetrant features green formulation.

Used to loosen frozen/rusted parts or as mold release, EcoLine® CLP maximizes life of machine parts by reducing friction and wear in addition to providing corrosion protection. USDA certified biobased product is non-flammable, non-toxic, and freeze stable and can be removed with common detergents. Safe for use on all metals and most plastics, multifunctional cleaner/lubricant/penetrant...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics