Adhesives & Sealants, Chemicals & Chemical Processing, Green & Clean, Lubricants, Paints & Coatings

Complete Line of Loctite® Repair Products for Wind Turbine Installation and Maintenance

Jun 12, 2012

O&M Products Increase Equipment Reliability and Reduce Downtime and Failure Rocky Hill, Conn. - For O&M applications on wind turbines, Henkel Corporation has introduced a full line of Loctite® adhesives, sealants, lubricants and coatings for installation and maintenance of blades, nacelles, towers and bases. For rotor blade repair, Loctite® high performance polyurethane resins cure rapidly... Read More


Technologically-Advanced Fluids Make CIMCOOL® Products

Jun 05, 2012

The Global Leader for Industrial Applications Cincinnati, Ohio - With products that boast results including four to five times longer sump life; up to 300% improved tool life; an increase in productivity; excellent rancidity control; greatly reduced concentrate usage; and operator-friendly use, CIMCOOL Fluid Technology offers some of the most technologically-advanced fluids for use in industrial... Read More


Silver-Filled Vacuum-Compatible Grease enhances thermal transfer.

May 11, 2012

Used in heat transfer applications from -60 to +550°F, Heat-Away(TM) 641-EV is formulated as thick paste that will not flow after application and retains viscosity over entire temperature range. Single-part, 100% solids, silver-filled, electrically and thermally conductive, vacuum-compatible grease exhibits thermal conductivity of 5.58 W/m-K and resistivity of less than 0.0008 ohm-cm. Vapor... Read More

Lubricants, Materials & Material Processing

Clariant Showcases Innovative Emulsifier for Metalworking Formulations at STLE 2012

May 10, 2012

  • Based on globally available raw materials, avoiding supply volatility
  • Exceptional low-foaming properties
  • Safe for people and the environment Charlotte, N.C. - Here at the STLE (Society of Tribologists and Lubrication Engineers) 2012 Annual Meeting & Exhibition, booth #215, Clariant is highlighting the newest addition to its broad portfolio of high-performance components and... Read More

  • Lubricants

    Sarah Fisher Hartman Racing Welcomes Quaker Chemical

    May 10, 2012

    New technical partner will provide lubricants and support CONSHOHOCKEN, Pa., Sarah Fisher Hartman Racing (SFHR) competes in one of the most competitive and technologically advanced racing series in the world - the IZOD IndyCar Series. Racing and winning over the competition requires high endurance and performance products. As an official SFHR sponsor and technical partner, Quaker Chemical... Read More

    Lubricants, Materials & Material Processing

    Dow to Present Innovative Solutions at STLE 2012

    May 04, 2012

    Three business units will show how their products contribute to the field of tribology and lubrication technology Midland, Michigan - The Dow Chemical Company (NYSE: DOW) will be showcasing its products and technologies specially formulated for synthetic lubricant technology, metalworking and lubricant additives, and microbial control at the Society of Tribology and Lubrication Engineers (STLE)... Read More

    Green & Clean, Lubricants

    Plews Introduces UltraLube® Greases for Rail Curves and Switch Plates

    May 01, 2012

    (Dixon, Ill.) - Plews, Inc., dba Plews & Edelmann, today announced the introduction of UltraLube® Rail Curve Greases and Switch Plate Lubricants. These premium biobased greases and lubricants - formulated from U.S.-grown vegetable oils - are available in Hi-Visc and Lo-Visc formulations. UltraLube Rail Curve Greases contain advanced extreme pressure additives to guard against wheel and rail... Read More

    Lubricants, Materials & Material Processing

    Acquiring Strategic Accounts through Value Propositions

    Apr 19, 2012

    A case study in Cost Savings through Chemical Management Services and Metalworking Coolants CONSHOHOCKEN, Pa., Feb. 29, 2012 - In an effort to improve machining and grinding performance for steel and cast iron components as well as overcome problems with hazardous waste generation and coolant odors, Rane TRW Steering Systems Ltd., the largest manufacturer and exporter of power steering gears in... Read More

    Lubricants, Portable Tools

    Grease Guns feature clear, shatterproof barrel.

    Apr 17, 2012

    Plews/Lubrimatic® UltraView(TM) clear, polycarbonate shatterproof barrel grease guns allow proper identification of grease type inside gun. Lever Action version delivers 1.5 oz/40 strokes and develops 8,000 psi, while Pistol version dispenses 1 oz/40 strokes, produces 5,000 psi, and is easily operated with one hand. Both are equipped with CNC-machined, high-tolerance aluminum headcap, heavy... Read More

    Chemicals & Chemical Processing, Lubricants, Materials & Material Processing

    Struktol Company of America to Launch New Products at NPE 2012

    Mar 22, 2012

    Expanded Line of Intelligent Additive Solutions Delivers Enhanced Processing and Performance STOW, Ohio - Struktol Company of America, a leading global supplier of polymer additives, will introduce several new products at NPE 2012: The International Plastics Showcase, April 1-5, 2012 at the Orange County Convention Center in Orlando, Fla. (Booth #31017). These new additives have been designed to... Read More


    Synthetic Motor Oil exceeds API performance standards.

    Mar 16, 2012

    Available in SAE 5W-20 and 5W-30 grades, Monolec® Tetra-Syn(TM) Engine Oil incorporates Monolec® wear-reducing additive to protect against rust, corrosion, and oxidation and to prevent formation of ash and other deposits. Product also provides protection from high temperatures found in engines with turbochargers and superchargers. Typical applications include personal passenger cars, vans,... Read More


    Assorted Fluids meet tube and pipe industry challenges.

    Mar 05, 2012

    Formulated to increase productivity by up to 20% in tube and pipe operations, CIMMILL(TM) Fluids deliver lubricity and rust protection while also helping to extend sump life. Properties also promote foam control, tool life, and up-time during critical roll forming, cut off, and threading operations for mills and processors. Fluids exceed key performance needs of tube and pipe mills while... Read More

    Green & Clean, Lubricants

    Advance Auto Parts Gives Consumers the Power to Close the Loop with Valvoline NextGen(TM) Motor Oil

    Feb 28, 2012

    Program Helps Vehicle Owners Protect Their Cars, the Environment and Their Wallets LEXINGTON, Ky. and ROANOKE, Va. - Advance Auto Parts and Valvoline are teaming up to bring engine performance and environmental responsibility together like never before. Consumers can now return their used oil to any of the more than 3,300 Advance Auto Parts stores nationwide and purchase Valvoline NextGen to help... Read More

    Green & Clean, Lubricants

    Biodegradeable Oil lubricates machine toolways, slides, and guides.

    Feb 22, 2012

    Formulated with vegetable seed oils and friction-reducing additives, UltraLube® Slide Way Oil features load carrying and anti-wear properties that protect help extend part life as well as stick-slip properties that lend to smooth operation and accurate work. Lubricant, available in ISO46 and ISO68 weights, has bio-stable formulation that does not contain any toxic chlorine or sulfur. It may be... Read More

    Green & Clean, Lubricants

    Eco-friendly Engine Oil suits compressed natural gas fleets.

    Feb 16, 2012

    Consisting of up to 83% re-refined material, ECO ULTRA® completely eliminates new petroleum products from circulation in compressed natural gas fleets while meeting engine manufacturers' specifications and SAE requirements. Formulation provides optimal deposit, wear, oil oxidation, and oil nitration control in typically turbocharged engines fueled by natural gas. Low in phosphorous, ECO... Read More

    Cleaning Products & Equipment, Lubricants, Services

    Quaker Chemical Management Services Achieve Maximum Value for Customers

    Feb 15, 2012

    Switching cleaners reduces customer's total chemical spend and increases usage efficiency CONSHOHOCKEN, Pa. - Quaker Chemical (NYSE:KWR) - a global leader in metalworking process fluids - has extensive experience with helping manufacturers around the world respond to the challenges of accomplishing more with fewer resources, remaining competitive, staying compliant, and maintaining a high... Read More

    Cleaning Products & Equipment, Lubricants, Materials & Material Processing, Transportation Industry Products

    MPMC Media Trade Conference Exceeded Expectations for Champion Racing and Performance Products

    Feb 01, 2012

    Champion Oil, a globally recognized industry leader of "purpose-built" synthetic lubricants, concluded very successful technical discussions this week at the Motorsports Parts Manufacturers Council (MPMC) Media Trade Conference, a division of the Specialty Equipment Market Association (SEMA). Champion Oil at the MPMC Conference met with over 70 technical editors from digital and print publishers... Read More

    Green & Clean, Lubricants, Machinery & Machining Tools

    Quaker's Technical Expertise Results in Solutions That Meet New VOC Regulations

    Feb 01, 2012

    Quaker's participation in the validation of the test method for the new SCAQMD Rule 1144 enabled early product development - resulting in new, compliant technology for customers CONSHOHOCKEN, Pa. - Quaker Chemical (NYSE: KWR) - a global leader in metalworking process fluids - has intimate knowledge of and experience with the South Coast Air Quality Management District's (SCAQMD) Rule 1144, a new... Read More


    Aerosol Food Grade Lubricants feature DETEX(TM) packaging.

    Jan 24, 2012

    LPS® NSF® H1 food grade lubricants are available in cans that incorporate DETEX(TM) technology, which makes all plastic components on aerosol cans metal detectable. Blue colored caps, actuators, and extension tubes signify DETEX(TM) components, which can help prevent food from being contaminated and assist food processing plants in meeting strict HACCP requirements. Read More