New Load Cells Products

Load Cell suits limited space applications.

Single-point Model S215 Ultramini(TM) measures full-scale forces of 2, 4, and 12 lb. It can be used with rigidly mounted platform or to measure tensile or compressive forces. Threaded holes allow bottom mounting, lowering height of scale assembly to 0.22 in. Unit features 0.01% non-repeatability and 200% overload. It is useful for scales, laboratory use, force measurement, robotics, and general...

Load Cells

Load Cell Option provides 4 to 20 mA output signal.

Company's entire line of general purpose and fatigue rated load cells are available with optional signal-conditioning circuitry to provide 4-20 mA output and current mode, 2 wire, loop powered operation from any unregulated, 8 to 36 Vdc power supply. Additional signal conditioners are not required. Advantages include improved signal-to-noise ratio, ability to transmit signals over long distances,...

Load Cells

Load Cell Weighing Kit suits clean room operations.

Model M1015HPWS high-purity weighing system (HPWS) is installed on existing mixers, containers, or tables to provide intrinsically safe scales for ultra-pure measurements up to 20,000 lbs. Solid-state, hermetically sealed design offers 300% overload rating. Stainless steel FM approved and nitrogen filled housing (Samiary 3A rated) is fully sealed and self-contained. Unit is self-leveling with...

Load Cells

Load Cell suits limited space applications.

MLP Series measures 0.750 x 1.625 x 0.625 in. for all capacity ranges, including 10, 25, 50, 75, 100, 150, 200, 300, 500, 750 and 1000 lbs full-scale. Load cell is designed for tension and compression applications. Combined error of hysteresis and non-linearity is less than 0.1% FS, and non-repeatability is .05% FS. Output is 2 mV/V nominal via full wheatstone strain gage bridge. Load cell is...

Reducing Risk Through On-Demand Manufacturing

Check out this white paper to learn how putting manufacturing safeguards in place stimulates growth and reduces risk in your supply chain.

Load Cells

Load Cell is designed for low creep.

Model 48 pancake style load cells are traceable to NIST, making them suitable for use in metrology lab and as reference standard for calibrating other load cells. Tension/compression devices have accuracy to 0.02% in ranges from 250-100,000 lb. Options include 4-20 mA or Ã-

Load Cells

Load Cells measure up to 3,000,000 lb.

Compact MPB family of high capacity all-welded stainless steel compression load cells measure 1.0 to 14 in. high and from 1.25 to 10 in. dia, making them suitable for use in space restricted areas. Cells are available in ranges up to 3,000,000 lb. Optional high level outputs include 0 to 5 Vdc, 0 to 10 Vdc, and 4 to 20 mA. Accuracy is +/- 0.25% and operating temperature is from -65 to 250 deg F....

Load Cells

Compression Load Cells measure up to 10,000 lb.

Stainless steel Model 3691 Series is sealed for IP 67 environmental protection for automotive, aerospace, process control, and industrial applications. Each has integral cable, radius loading surface, and temperature compensation. Higher capacity units come with removable anti-rotation pin. Repeatability is less than 0.5%, non-linearity and hysteresis is better than 1%, and overload protection is...

Load Cells

Load Cell System can be scaled to 5 digits.

System combination is comprised of HSW (Hermetically Sealed Load Cell) and DPM-3 Panel Mount Meter. Suitable for various industrial and OEM force measurement and weighing applications, DPM-3 samples 60 readings per second, has analog output, and provides true peak reading capability. HSW tension or compression Load Cell is offered in various ranges from 1,000 to 50,000 lbs.

Load Cells

Load Cell suits hostile weighing environments.

SM2PZ is hermetically sealed against moisture and has dual shielded cable. Two sense wires feed back voltage reaching load cell. Complete compensation of changes in lead resistance due to temperature change or cable extension is achieved by feeding voltage into appropriate electronics. SM2PZ features capacities from 500 kg to 5 t and total error band of 0.02% FS. It is suitable for use in...

Load Cells

Load Cell offers ranges to 20,000 lbs.

Model 75a pancake-style, tension and compression type load cell provides +/-0.1% FS non-linearity and internal amplifier for voltage or current output. It has hermetically sealed, all welded stainless steel construction, providing resistance to side loads. Load cell features life cycle rating of approximately 10E+09 fully reversed cycles and standard operating temperature from 0 to 185 deg F. It...