Lasers

Integrated Tunable Laser Assembly operates in C-band window.

Suited for use from 1,528-1,563 nm, LamdaFLEX(TM) iTLA continuous wave tunable laser source provides internal SBS dither generation, direct input path for trace tone functionality, and field programmable firmware. Laser and control electronics are pre-mounted on dedicated circuit board to facilitate integration with users' system. Core tunable technology is built on monolithic structure with no...

Read More »

Pulsed Solid-State Laser suits cutting/welding applications.

Along with removable touch-screen control panel and real-time power control, TruPulse series offers burst function that lets average power be briefly exceeded and increase pulse frequency to reduce welding cycle. Maximum mean power and pulse energy, focusability, and beam quality are adjustable to meet application area requirements. While featuring modular power supply structure, average power...

Read More »
Laser Diode Module includes menu-driven microprocessor.

Laser Diode Module includes menu-driven microprocessor.

Accommodating fiber-coupled, 14-pin butterfly, DIP, and DIL packages, Model IQÂ-µ4X is available with 20 MHz analog beam modulation or 100 MHz digital beam modulation. At 760 nm, unit emits 5 mW of output power with spectral width of 2 MHz. Module measures 1.50 in. dia x 7.52 in. long and can operate in constant current or automatic power control mode. Applications include fluorescence,...

Read More »
Diode Laser suits biomedical and optical media applications.

Diode Laser suits biomedical and optical media applications.

Model iFLEX2000(TM) fiber-coupled laser delivers 30 mW at 405 nm with TEM00 Gaussian beam. Laser uses forward closed loop power control that is immune to optical feedback and offers long-term stable output and low short-term amplitude noise. Laser beam conditioning is performed using singlemode fiber that acts as spatial filter while also providing means of flexible beam delivery.

Read More »
Cutting Lasers suit materials processing applications.

Cutting Lasers suit materials processing applications.

Matrix(TM) infrared (1.06 micron) Q switched lasers, available with choice of air cooling or closed-loop water cooling, deliver 10 W of average power. While 10 kHz model is suited for engraving materials that are problematic for CO2 lasers, 30 kHz version is designed for trimming active and passive circuit components in microelectronics. Also available, 350 kHz version offers less than 1% rms...

Read More »

CO2 Lasers range from 1-6 kW.

Designed to withstand harsh industrial environments, CO2 Lasers weigh about 150 lb each, and can be mounted directly above cutting surface. They enable unlimited travel area on XY cutting table since they do not require optical delivery system. Optical quality of beam is close to diffraction limit, while overall efficiency can reach 16%.

Read More »
Fiber Laser has small footprint and turnkey operation.

Fiber Laser has small footprint and turnkey operation.

Buccaneer Er-doped mode-locked femtosecond laser offers pulse width of 150-300 fs at 1,560 nm with average output power of greater than 100 mW, peak output power of 1 kW, and repetition rate of 70 mHz. Frequency doubled option provides pulse width of 150-200 fs at 780 nm, with average output power of greater than 10 mW, peak output power of 1 kW, and repetition rate of 70-80 mHz. Oscillator and...

Read More »

Laser Diode Module features 25 mW output power.

Measuring 12 mm dia x 43 mm long, cylindrical 405 nm Blue-Violet Laser Diode Module with TTL modulation produces stable elliptical output beam of 3.5 x 2 mm. Glass AR coated aspherical lens may be adjusted to produce either collimated beam or focused spot. TTL modulation input will accept signals from dc up to 1 kHz minimum. Operating from 8-12 Vdc with 80 mA current, module operates from -10 to...

Read More »
EFD Solder Paste Group and Leister Technologies Join in Cooperative Worldwide Marketing Effort for Advanced Tabletop Laser Soldering Reflow

EFD Solder Paste Group and Leister Technologies Join in Cooperative Worldwide Marketing Effort for Advanced Tabletop Laser Soldering Reflow

Lincoln, RI (August 9, 2006) - The Solder Paste Group of EFD, Inc. and Leister Technologies LLC have agreed to a cooperative marketing effort for a unique, high-speed, high-precision, automated solder paste reflow system designed to substantially increase production yields and deliver greater throughput. Among its many advantages, the times savings alone with the EFD/Leister package could reach...

Read More »

DPSS Wafer-Scribing System provides 10 wph throughput.

Optimized for 24/7 environments, AccuScribe AS2000FX utilizes UV DPSS laser technology and advanced optical and image-processing technologies. Industrial platform provides 4 in. wafer support and can be customized for various requirements. Wafer-edge detection system enables operator to scribe every inch of wafer as well as partial or broken wafers. With backside alignment capability, users can...

Read More »

All Topics