New Lasers Products

Universal Laser Systems, Inc. Awarded U.S. Patent for Innovative Versalaser(TM) Design

SCOTTSDALE, Ariz. - (April 20, 2006) Universal Laser Systems, Inc. (ULS), manufacturer of CO2 lasers and laser systems, announced today that it has been awarded U.S. Design Patent No. D517,474 for its VersaLaser laser cutting and engraving system. The patent was awarded for the unique industrial design aesthetic of VersaLaser's external cabinet, which also serves as a Class 1 laser safety...

In-line Laser Marking Cell offers -

Modular F5000L delivers plug-and-play functionality and can precision mark on flat or curved surfaces with standard 10 W CO2 laser for plastic or optional YAG laser for metals, ceramics, and other surface materials. Along with servo-controlled x-y motion axis, system features built-in flue gas exhausting system, integrated conveyor system with automatic width adjustment, and Class 1 laser...

World Debut for Bookhamt Integrable Tunable Laser Assembly at Ofc/Nfoec 2006

San Jose, CA - March 3, 2006 - Bookham, Inc. (NASDAQ: BKHM), a leading provider of optical components, modules and subsystems, is to launch its first integrable tunable laser assembly (iTLA) at OFC/NFOEC next week in Anaheim, California. The product, based on a monolithic platform, brings cost effective wideband tunability to Long Haul and regional Metro applications. The iTLA will be on display...

Bookham(TM) Pushes Reliability Expectations with Industry-Leading 980nm Pump Lasers

San Jose, CA - February 27, 2006 - Bookham, Inc. (NASDAQ: BKHM), a leading provider of optical components, modules and subsystems, is highlighting its industry-leading line of 980nm pump laser modules at next month's OFC/NFOEC 2006 by releasing reliability figures that exceed all expectations for such devices in terrestrial applications. Bookham has now shipped over 320,000 of the 980nm pump...

Deploying Commercial Electronics in Rugged Environments

This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.

Tunable Laser Assembly has built-in control electronics.

Based on MSA standards, Integrable Tunable Laser Assembly (ITLA) provides DWDM optical network systems solution with DTL C13 Series Dynamically Tunable Laser and electro-optical technology. Solid-state product comes in hermetically-sealed, 26-pin butterfly package and meets reliability standards of Telcordia GR-468-CORE requirements. By tuning over entire C-band on 50 GHz ITU channel grid, one...

Yellow DPSS Laser at 561nm Produces 60 MW of Single Frequency Output

Reno, Nevada - CrystaLaser, Inc. has produced yellow laser of single longitudinal mode operating at 561 nm at the highest power level, up to 60 mW on the market. The laser has a diffraction-limited (TEM00) beam and less than 0.5% (rms) of low noise in an ultra-compact laser housing. Lower output powers from 50 mW to 5 mW are also available. CrystaLaser GCL series green-yellow laser is ideally...

Laser Processing Systems provide 400 W of air-cooled power.

XL Series of industrial CO2 laser processing systems utilizes direct air cooling eliminating need for chillers and complicated plumbing. Models XL-9200 and XL-12000 incorporate 36 x 24 and 48 x 24 in. processing fields, respectively. Systems feature automatic detection of installed options for error-free machine setups, beam indicator to identify point of laser impact on material's surface, and...

Laser Workstation treats difficult vascular lesions.

CynergyÃ-® Workstation with MultiPlex(TM) technology enables rapid sequential emission of pulse-dye and Nd:YAG wavelengths from same optical fiber, with short time delay between 2 pulses. When combined, 2 wavelengths are effective for treating many vascular lesions such as portwine stains and difficult facial telangiectasia.

University of Maryland Uses Malvern Spraytec in Fire Suppressant Studies

Studies of fire suppression sprays in the Department of Fire Protection Engineering at the University of Maryland, directed by Professor AndrÃ© Marshall, have been significantly enhanced by the acquisition of a Malvern Spraytec system. The Spraytec allows direct measurement of spray droplet size, producing data that facilitate model development and validation. Spraytec is a laser...

Industrial Laser enables high-throughput micromachining.

Producing 30 W at 1,064 nm in TEM00 beam, PRISMA(TM) 1064-32-V features pulsewidth as short as 18 ns and pulse repetition rates from 20-100 kHz. Unit has sealed resonator and uses AAA(TM) Aluminum-free Active Area pump diode technology. Solid-sate Nd:YVO4 laser is suited for micromachining small features in all types of materials because its short pulsewidth results in minimal heat-affected zone.

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.