Electric IR Spot Heater warms commercial decks and patios.
Designed for commercial and residential deck and patio applications, HZE X5C 015 series has curved back design and compound reflective IRLens(TM) that focuses IR energy into central beam. Unit requires 1,500 W of electric power at 120-277 V and will raise temperature of people and objects in 14 ft-² area by 15-
Read More »
Infrared Chamber Heater handles tube, cable, and wire.
Utilizing 4 elliptical reflectors, ChamberIR Model E4 focuses high-density infrared energy generated by T3-style halogen lamps onto cylindrically shaped target area. Elliptical chamber rapidly heats small-size continuous materials with OD less than 0.25 in. Designed to heat up and cool down instantly in response to power control signals, lamps reach 90% of full operating temperature within 3 sec...
Read More »
Infrared Heaters operate on natural gas or propane.
True Dual 2-Stage Heaters regulate air and gas flows at high- and low-heat stages for optimum efficiency. Design certified to ANSI/CGA standards and approved for indoor/outdoor use, they have high heat/low heat input ratings from 85,000/65,000 BTUH to 200,000/145,000 BTUH. Other features include direct spark ignition and heavy duty 12 ga black steel combustion and heat exchanger tubes. SS models...
Read More »
Infrared Heater offers flexible design options.
Negative pressure VANTAGE-® NP provides even heat distribution from vacuum design with uniform tube temperatures. With inputs from 40,000-200,000 Btu/h and tube lengths from 10-80 ft, heater is suitable for variety of building sizes. Burner box includes protective enclosure allowing minimal heat exposure to electrical controls. Heater can be designed as unitary model in straight, U-tube, or L...
Read More »
A Complete Guide to Fabricating Custom Components
This white paper provides an in-depth guide to fabricating custom components.
Read More »
Gas Heaters offer capacities from 40,000-250,000 BTU/hr.
Available in natural and propane gas with tube lengths from 15-80 ft, LTS Series straight tube infrared heaters come in 19 models and in more than 100 different configurations. Corner reflectors and 90-
Read More »Tube Heaters offer capacities from 40,000-250,000 BTU/hr.
Available in natural and propane gas, LTU Series U-tube heaters suit high air change environments and higher mounting heights of 12 ft or over. Unitized low-intensity gas-fired infrared heaters are C.S.A. approved and can be configured to meet variety of industrial and commercial needs.
Read More »IR Line Heater utilizes quartz halogen lamp.
LineIR-® series concentrates radiant heat to long, narrow area for applications requiring clean, responsive, non-contact heat source. Model 5194 generates energy along 0.08-0.18 in. wide lines and comes in 2.25-38 in. lengths. Capable of heating products to temperatures of 2,400-
Read More »
Modulating Unitary Heater optimizes combustion.
VANTAGE-® MODULATING Heater provides optimal fuel efficiency by adjusting both fuel and combustion air. Burner modulation can be under automatic or manual control to suit different applications. Available in natural gas or propane, unit features comprehensive on-board diagnostics for fault and system status and hot surface electronic ignition control. Protective enclosure for controls minimizes...
Read More »
Infrared Water Heater eliminates fluid contamination.
Ultrapure Water Heater consists of quartz glass twin-tube IR emitter enclosed by larger quartz glass tube with internal gold coating. Offering heating efficiencies exceeding 95%, halogen-free unit can be fit in-line and achieves temperature rises to 80-°K depending on liquid throughput and emitter arrangement. Power rating is 6.3 kW for heated length of 600 mm, but heated lengths up to 2 m are...
Read More »Shortwave IR Emitters produce 0.9-1.6 microns max.
Featuring back-mounted gold reflector, Shortwave Infrared Emitters offer heated lengths from 1-120 in., infinitely adjustable control, and linear power up to 400 W/in. They require practically no heating-up or cooling down times. With tube format of 23 x 11 mm, twin tube units feature filament temperature from 1,800-2,200-
Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.
Read More »
