Eraser Co. to Display Products at 2012 Wire Show
Syracuse, NY- The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display top quality industrial processing equipment at the 2012 Electrical Wire Processing Technology Expo (EWPT) from May 9th to May 10th in Milwaukee, WI - booth #1241. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their extensive line of...
Read More »CCI Thermal Technologies Inc. Announces CSA C/US Explosion-Proof Certification for the Cata-Dyne(TM) CHS Heating System
Edmonton - CCI Thermal Technologies Inc. is pleased to announce our newly certified Cata-Dyne(TM) cCSAus approved heating system for Hazardous Locations Class I, Division II, Group D. The Cata-Dyne(TM) CHS Heating System includes the industry leading Cata-Dyne(TM) infrared gas catalytic heaters coupled with the Cata-Dyne(TM) CHS Control Panel to provide automated start-up and remote control of...
Read More »Modular Cylindrical IR Heaters have clam shell design.
Available to OEMs and capable of 24 hr operation, cylindrical clam shell IR heaters provide precisely controlled heat at medium wavelength that completely surrounds product for uniform effect. Heaters utilize clear or opaque quartz tubes in center with heating elements wrapped around outer surface of quartz. Insulation keeps outside skin at 120° for operator safety, and design failitates...
Read More »Medium Wavelength Infrared Lamps are suitable for thin films and plastics.
Complimentary to various substrates, Fast Response Medium Wavelength Lamps (FRMW) are engineered to optimize radiation of energy within medium wavelength range. Medium wave IR energy output by these heaters is absorbed by water, inks, paints, and plastics. Supplied in lengths up to 52 in., IR lamps are capable of color temperature of 2100°F and peak wavelength of 2.0 microns. This frequency...
Read More »
Caps and Plugs Designed for Peace of Mind
Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.
Read More »
Eraser Co. to Display Products at the MD&M West Expo: Booth #1745
(Syracuse, NY): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2011 Medical Device Manufacturing West Expo (MD&M West) from February 8th through the 10th in Anaheim, CA. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their world-class medical...
Read More »CCI Thermal Technologies Inc. is proud to Introduce the Cata-Dyne(TM) LS, Liquid Start Catalytic Heater
Edmonton - CCI Thermal Technologies Inc is proud to announce the release of the Cata-Dyne(TM) LS. With the same reliability, versatility and ingenuity of the Cata-Dyne(TM) family of heaters the Cata-Dyne(TM) LS has been coupled with an evolution in technology improving start-uptimes from 15 minutes to less than 5 minutes, while simplifying the installation and lowering costs. CCI Thermal centered...
Read More »
Ceramicx to Provide Free Infrared Heat Testing at K 2010 Show
Leading international heating systems specialist and manufacturer Ceramicx has this week completed an infrared heating test rig that will be able to immediately characterise the process heat performance for plastic sheet and film materials. The infrared heat testing service will be available free of charge at the Ceramicx stand for the K 2010 international plastics exhibition. The principal...
Read More »
Space-Ray to Highlight its Broad Line of 80 Different Heating Models
IN OVER 400 DIFFERENT HEATING CONFIGURATIONS AT THE 2011 AHR EXPO® CHARLOTTE, N.C. --- Space-Ray Infrared Heaters will highlight one of the most complete lines of infrared heaters in the industry at the at the 2011 AHR Expo® at the Las Vegas Convention Center in Las Vegas, NV, Booth # C238, January 31 to February 2, 2011. The AHR Expo® is the world's largest HVAC&R industry show...
Read More »
Space-Ray Tube Integrity Safety System Highlighted at the AHR Expo
CHARLOTTE, N.C. - Space-Ray Infrared Heaters will show its complete line of tube and ceramic heaters including its recently introduced positive pressure low intensity tube heaters with its patent-pending Innovative Tube Integrity Safety System(TM) (TISS) for the ultimate in fire safety protection at the 2010 AHR Expo®, January 25-27, 2010, Booth #1410 at the Orange County Convention Center...
Read More »
Eraser to Display Products at MD&M West 2010
Syracuse, New York: The Eraser Company, Inc. is proud to be part of the MD&M (Medical Device & Manufacturing) West 2010 show scheduled for February 9th through February 11th in Anaheim, CA (booth #1662). This exciting show provides Eraser with the perfect venue for hands-on demonstration of their line of industrial grade medical (flexible) tubing cutters. Also on display will be Eraser's renowned...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
