Angle Drill Heads are coolant driven.
Machining Heads

Angle Drill Heads are coolant driven.

Driven by high-pressure 300-1,500 psi coolant, custom drill heads machine at any angle from 90-0° and do not require spindle rotation for power. Where multi-position machining is required, spindle can function as indexer, eliminating need for multiple mechanically driven heads or parts indexers. Capable of speeds to 13,500 rpm and output to 1.5 hp, heads are available in 3 sizes and can...

Read More »
Weld Head suits limited-clearance applications.
Arc / Resistance Welders

Weld Head suits limited-clearance applications.

Orbital Model 8 Series, for fusion TIG applications, welds tube and thin-wall pipe from 0.25-6.625 in. OD. When connected to cooling unit, all components are liquid cooled, including cables, clamp housings, and electrode rotor. Narrow width of head makes it suitable for applications such as welding fitting-to-fitting or fitting-to-valve body assemblies, and welding materials such as stainless...

Read More »
Photodiode Head fits into tight locations.
Photodiodes

Photodiode Head fits into tight locations.

Model PD300-TP laser power measuring head is 4 mm thick and can make power measurements on cw lasers in tight spaces. Sliding filter measures 50 pW to 300 mW and also contains measurement in dBm. Spectral range is 350-1100 nm. Unit provides ±3% accuracy within spectral response range of 400-950 nm. Wavelength calibration is built-in. Model PD300-TP operates on stand or can be hand held.

Read More »
Showerhead conserves water through design.
Spray and Faucet Heads

Showerhead conserves water through design.

ACT-O-MATIC® provides 2.5 gpm flow in Cone-Within-A-Cone spray. Pressure-compensating flow control provides consistent flow at low pressures. Chrome-plated, all brass showerhead incorporates self-cleaning spray disc that eliminates sand and other particles after each use. When water is turned off, disc retracts to drain position, washing away particles and preventing residual dripping after...

Read More »
Weld Heads allow welding of pipes and tubes in place.
Weld Heads

Weld Heads allow welding of pipes and tubes in place.

Quickclamp Weld Heads are designed for GTAW circumferential butt welding of pipes and tubes. They cover size range from 1 in. OD tube to 6 in. pipe. Units include electronic Arc Gap Control, filler wire feed capability, torch rotation, and torch oscillation with adjustable stroke width, speed, and end point dwell. Heads mount using adjustable clamp. Standard 2 lb wire spool, mounted directly on...

Read More »
Applicator Head sprays adhesives and similar fluids.
Spray and Faucet Heads

Applicator Head sprays adhesives and similar fluids.

Mid-Size Electromatic XXXIV applies sprayed patterns in diameters from Â-¼ to 12 in. wide. Applicator head produces spray patterns ranging from fine mist to heavy wet coat by mixing air and fluid as it leaves spray head. All wetted parts are stainless steel with only one moving part containing no seals or packings. Internal 24 Vdc or 120 Vac solenoid coil eliminates need for additional...

Read More »
Universal Angle Heads double as multiple fixed angle heads.
Machining Heads

Universal Angle Heads double as multiple fixed angle heads.

Universal Angle Heads (UAH) enable drilling, milling, and other metalcutting operations to be performed at any angle between ±90°. Shot pins are inserted at any angle to suit customer requirements and any number of angles may be selected. UAH 140, 175, 205, and 240, sealed, maintenance-free units cover spindle tapers from 30 to 50 BT-CT-DIN-HSK. Maximum tool dia that may be clamped in...

Read More »
Machining Heads

Boring Head can be used with 1 of 2 style inserts.

CB4 size for Cri-Bore Modular Boring System has maximum bore diameter of 7.3 in. Using micrometer dial, CB4 is adjustable in 0.001 in. increments (diameter). Available with triangular insert holder or 80° diamond insert holder, industry standard TP or CC style inserts can be used for any boring application.

Read More »
Boring Heads eliminate vibration.
Machining Heads

Boring Heads eliminate vibration.

VersaMax(TM) Balanceable Fine Boring Heads are capable of limiting residual imbalance up to as low as 10 g-mm. Available for bore sizes from .787 to 2.638 in., heads improve roundness, accuracy, repeatability, and surface finish. Bore diameter settings can be adjusted to .0002 in. accuracy. Vernier scale allows adjustments to .0001 in. with very low backlash. Through-the-spindle coolant with...

Read More »

All Topics