Hand Held Drills

Rotary Hammer combines hammer drilling and chiseling.
Hand Held Drills

Rotary Hammer combines hammer drilling and chiseling.

Featuring 9.6 A motor, Model KHE 55 offers no-load speeds of 135-275 rpm and 1.300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain virtually constant speed between load and no-load. Hammer offers rotational torque of 531 lb-in. and variable impact energy from 1.0-9.0 joules per blow. Drilling range is from Â-½-1½ in. with maximum capacity in...

Read More »
Attachment converts cordless drill to right-angle drill.
Hand Held Drills

Attachment converts cordless drill to right-angle drill.

Heavy-duty Right Angle Drill attachment, model 49-22-8510, enables users to work in tight spaces and facilitates drilling of holes or driving of screws. Suited for use with cordless 2.4 V or larger drills, product fits any ¼ in. or larger chuck and measures 2 in. wide. Attachment can control up to 235 lb-in. torque and accepts ¼ in. hex drive accessories, including screwdriver, hex drive,...

Read More »
Self-Feeding Drills target plastics manufacturing industry.
Hand Held Drills

Self-Feeding Drills target plastics manufacturing industry.

Series 2000 and Series 2100 produce one or many holes in production parts simultaneously. Units feature built-in pneumatic stroke cylinder offering 2 different strokes and electric motor with industrial-duty HTD timing belt system. Many drills can be operated in parallel to produce short cycle times for gang hole drilling. Options to integrate drills into existing operations or apply PLC logic...

Read More »
Cordless Drill/Driver features 30 minute charge.
Hand Held Drills

Cordless Drill/Driver features 30 minute charge.

Offering up to 460 lb-in. of torque, 12 V Model BSZ 12 includes Variospeed electronics that allow infinite no-load speeds up to 1,350 rpm. Quick-change 1.4 Ah battery is part of air-cooled charging system that offers up to 2,000 charges/battery. Model BSZ 12 can drill up to 3/8 in. holes in mild steel and up to 1 in. holes in soft wood. Additional features include 3-level planetary gears,...

Read More »
Hydraulic Rotary Hammer Drill uses up to 1 in. dia bits.
Hand Held Drills

Hydraulic Rotary Hammer Drill uses up to 1 in. dia bits.

Designed for percussion drilling of anchor and thru-holes in concrete, rock, and masonry, Hydraulic Rotary Hammer Drill delivers 3,400 blows/min and uses SDS-Plus shank carbide tipped bits. Product can be switched to rotary mode for drilling steel and wood. Features include safety clutch, adjustable side handle with depth gauge, and sealed gears with permanent lubrication. Weighing 15 lb, product...

Read More »
Fastening Drivers operate at 2,800 rpm to deliver 3,200 bpm.
Hand Held Drills

Fastening Drivers operate at 2,800 rpm to deliver 3,200 bpm.

Available in 9.6, 12, and 14.4 V models, Cordless IMPACTOR(TM) Models 23609, 23612, and 23614 provide 950, 1,050, and 1,150 lb-in. torque, respectively. Each has Â-¼ in. hex quick-change chuck for instant bit changes from driver to drill bits. Since hammer and anvil will not kickback and twist user's arm or wrist, tools help minimize fatigue. Additional features include variable-speed...

Read More »
Magnetic Drills incorporate LED indicator for safety.
Hand Held Drills

Magnetic Drills incorporate LED indicator for safety.

Models HMD904, HMD150, and 10914 feature LED indicator with circuitry that monitors critical magnet lift detector. LED provides instantaneous alert to operator, switching color from green to red if unsafe condition exists involving sensor. Drills also feature 2-stage power-on switch that prevents spindle rotation unless electro-magnet has been energized. In case of power interruption, relay...

Read More »
Hand Held Drills

Cordless Driver Drills withstand demanding projects.

Rated 18 V, Model DS18DMR delivers 550 lb-in. torque and comes with two 3.0 Ah batteries. Using two 2.0 Ah batteries, 14 V Model DS14DMR produces 450 lb-in. torque. Both feature 2-speed transmissions with no-load rpms of 0-400/1,600. Drills include rare earth magnet motors, replaceable armatures, externally accessible carbon brushes, industrial-grade Rohm chucks, 22-stage ratcheting slip-clutch,...

Read More »
Hammer Drill offers optimum ratio of speed to torque.
Hand Held Drills

Hammer Drill offers optimum ratio of speed to torque.

Model UH 650 ½-in. Universal Hammer Drill offers 2 speeds, variable speed trigger, and forward and reverse functions. Constant-on button helps reduce fatigue, while rubber grips help reduce vibration for worker comfort. Grease chamber prevents leakage to keep gearing and pinion well-lubricated at all times. Model UH 650 is suited for rotary drilling into wood, steel, or plastic as well as...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers