Ground Clamps are designed to meet electrical industry demands.
Accommodating electrical industry needs, UL-Listed andÃ- CSA-Certified Type GPL U-Bolt Ground Clamps are available for pipe, rod, rebar, and fence posts. Spacer is designed toÃ- optimize available positive contact area, and clamps rotate 90Ã-
Read More »Fixtureworks is Your Source for Premium Kipp Toggle Clamps
FixtureworksÃ-® offers a full line of Kipp toggle clamps for applications where frequent use and ergonomics are factors. These attractive clamps are also desirable for use on finished products. With high quality bushings that resist scoring and wear, Kipp toggle clamps are built to last. These clamps are designed to withstand over 30,000 cycles. They operate very smoothly, providing constant...
Read More »
Diaphragm Clamping System is designed for small parts.
VERO-S SPM-138 diaphragm clamping system lets user machine contour of workpiece into SPM unit. When VERO-S module is engaged with Turbo function, SPM-138 unit clamps evenly around outside of part. VERO-S SPM Plus 138 can clamp workpiece sizes from 36–125 mm dia, andÃ- workpieces do not have to be round. SPM unit generates clamping forces up to 50 kN, and repeat accuracy is at least 5...
Read More »
Compact Pin Clamp supports small part location and clamping.
Suitable for robot end effector welding applications, Model PCT features gapless, dual-finger design that provides linear non-toggle clamp action, clamping multiple parts within 7 mm range. Unit is available with 12–16 mm diameter pins for 2-way or 4-way locating, and bullet or low-profile nose styles. Pin is self-contained in cartridge that is replaceable in field. Steel and aluminum bronze...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »
Clamping Squares work with modular welding tables.
Designed for use with BuildPro Modular Welding Tables, BuildPro 4-Face Malleable Cast Iron Clamping Squares feature total of 26 mounting holes over 3 surfaces for unlimited fixturing options. Mounting holes can be used to stop, locate, clamp, or square up stock at 90Ã-
Read More »
Pipe Welding Alignment Clamps cover 3/4 to 12 in. pipe range.
Respectively covering 1–3 in., 2–6 in., and 6–12 in.- pipe size ranges, models INT 1-3, INT 2-6, and INT 6-12- feature heavy-duty, forged steel design with electroplating for rust and spatter resistance. Design accelerates alignment of different sizes of pipe with one clamp and will withstand years of heavy field use.
Read More »
Diaphragm Clamping System handles small parts.
Able to clamp work piece sizes from 36–125 mm in diameter, VERO-S SPM Plus 138 Module allows users to machine contour of work piece into SPM unit. Radial aligned clamping sides of quick-change pallet system pulls in clamping pin and locks it, retracting Diaphragm top plate to hold work piece with up to 50 kN of force and repeat accuracy of at least 0.0002 in. Hardened stainless steel is used...
Read More »
Clamping System Kit works with Haas rotary indexers.
Available in kit, modular Unilock Zero-Point Clamping System is specifically designed for all Haas 160 mm platter rotary indexing tables. Equipped with ISM 160 single chuck solution for face of 4th or 5th axis rotary tables, adapter rests between chuck and spindle face of rotary indexer itself. Zero-point clamping uses spring pressure to drive multiple clamping pins against tapered clamping knob....
Read More »
Platinum Tools Adds New Bridle Rings and Beam Clamps for Cable Management
Now Shipping, New Bridle Rings and Beam Clamps Offer an Efficient, Secure, and Cost Effective Solution for Low-Voltage Installations CAMARILLO, Calif. – Platinum ToolsÃ-® (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce that it has added five new Threaded Screw Bridle Rings (p/n JH802 though...
Read More »
Welding End Prep Tool Designed for Highly Repetitive Milling
A portable welding end prep tool that features air-operated clamping which reduces cycle times for highly repetitive end prep milling in fabrication shops is available from ESCO Tool of Holliston, Massachusetts. The MILLHOGÃ-® Mongoose Air Clamp™ Welding End Prep Tool is equipped with an air-operated clamp that attaches to a tube or pipe I.D. and releases from it by simply flipping a toggle...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
