Hand (Tool) Clamps

Clamp is designed to facilitate weld alignments.
Hand (Tool) Clamps

Clamp is designed to facilitate weld alignments.

Machined from heat-treated steel, HOG-TIE(TM) Weld Alignment Clamp delivers up to 15,000 lb of force for holding 2 boiler tubes, pipes, flanges, or plates in place. It consists of 2 clamping jaws and one steel strap. Latter is inserted between 2 sections being aligned, engages clamping jaws, and pulls them together using wrench. Design accelerates setup and releases instantly, while allowing...

Read More »
Clamping System utilizes electro-permanent magnets.
Hand (Tool) Clamps

Clamping System utilizes electro-permanent magnets.

With MAGNOS Clamping System, 5-sided machining is possible at high holding forces, without any interfering contours of clamping device. Pole extensions that act as workpiece support allow user to position different workpieces rapidly and precisely. Uniform clamping force is possible due to poles' quadratic geometry. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be...

Read More »
DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo
Hand (Tool) Clamps

DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

Madison Heights, Michigan, July 17, 2006 - DE-STA-CO will feature its entire line of products ranging from manual clamps to automation solutions at this year's Assembly Technology Expo (ATExpo) in booth #611. ATExpo will be held at the Donald E. Stephens Convention Center in Chicago, Illinois from September 26 - 28. The newest product to join DE-STA-CO Robohand's impressive list of automation...

Read More »
Toggle Clamps adjust to workpiece variations.
Hand (Tool) Clamps

Toggle Clamps adjust to workpiece variations.

Self-adjusting toggle clamps, with spring-loaded plungers, apply strong, fixed clamping force throughout adjustment range of 0.20 in. Push/pull clamps automatically compensate for workpiece variations while clamping with known force. Spring mechanisms are totally enclosed in plungers and provide force of 100 to 200 lb.

Read More »
Fixture Clamp provides positive down force.
Hand (Tool) Clamps

Fixture Clamp provides positive down force.

Available in 5 sizes and several styles, Pitbull Clamp features low gripping profile and generates vertical and horizontal clamping forces. It uses standard cap screw and oil-resistant O-ring. Clamp includes tool steel knife edge for aggressive stock removal and tool steel blunt edge for general purpose use. Brass version is available to help prevent marring of workpiece.

Read More »
Welding Fixture handles prototypes.
Hand (Tool) Clamps

Welding Fixture handles prototypes.

With Demmeler modular fixturing system, fixtures for prototypes, specials, spares, or any other short run welding job can be ready in four hours or less. It includes full range of components to fixture virtually any part. Engineering changes are easily handled. Duplicate fixtures can be ready in 20 min.

Read More »
Hand (Tool) Clamps

Carpenter's Tool holds up cabinets, drywall, and ceilings.

T-JAK(R) support plate is suitable for installing cabinets, drywall ceilings, crown molding, and ridge rafters. Once in place, it can be locked by straightening adjustment knob, then tightening it. Support can adjust from 53 to 84 in. and support loads up to 400 lb. Assortment of extensions increase span up to 10 ft. Also available is Mini-Brute(R), which has a range of 15 to 24 in, to install...

Read More »
Hold-Down Clamps withstand abuse.
Hand (Tool) Clamps

Hold-Down Clamps withstand abuse.

Series HDV Heavy Duty Vertical toggle clamps have hardened-steel axles and forked lower handles consisting of heavy-gauge, precision, alloy-steel castings. Holding capacities range from 660 to 5200 lbs. Variations include weldable arms, adjustable U-bars, T-handles, and stub-nosed arms for welded extensions.

Read More »
Expansion Arbors help grind gears.
Hand (Tool) Clamps

Expansion Arbors help grind gears.

FORTIS arbors clamp work pieces or tools for gear grinding and hobb sharpening. High inner pressure when actuated stretches steel concentrically, providing constant clamping and vibration dampening. Total indicator run out is less than 0.00012 in. Concentricity of arbors is maintained within 0.005 mm between OD and ID. Arbors are sealed against contamination, allowing them to be used in machining...

Read More »

All Topics