Gate Valves

Gate Valves

Asymtek Honored with SMT China Vision Award and EM Asia Innovation Award at NEPCON China 2009

DJ-9500 Fluid Jetting Valve and SV-100 Solder Paste Slider Valve Win in Dispensing Equipment Categories Carlsbad, CA - April 27, 2009 - Asymtek, a Nordson company and leader in dispensing, coating, and jetting technologies, announces it has received two prestigious awards during NEPCON China 2009. Asymtek's DispenseJet® DJ-9500 fluid jetting valve won the SMT China VISION Award, while Asymtek's...

Read More »
Gate Valves

Slurry Knife Gate Valve suits power and mining industries.

Able to handle heavy slurry applications, Series DX slurry knife gate valve provides drop tight shut-off in both directions. When valve opens, reinforced elastomer sleeves seal against each other and provide full port opening to minimize turbulence. Seats isolate and protect all metal parts of valve from coming in contact with process. Valve is designed to discharge small amount of slurry during...

Read More »
Gate Valves

Z 3240/ - Compact Shot Valve Gate Nozzle

The Compact Shot Z3210/- series which has been proven in manifold applications and allows small installation spaces is extended with a new variant Z3240/- with valve gate. Internal gate positions in long and narrow articles or narrow pitch centres can be achieved with the process reliability of a valve gate solution. The needle valve guarantees optimum post-pressure transmission and avoids...

Read More »
Vacuum Gate Valve monitors up to 4 pumps.
Gate Valves

Vacuum Gate Valve monitors up to 4 pumps.

Taking less than 0.3 seconds to close, Protection Vacuum Gate Valve protects in-process products in event of vacuum pump failure. Bellows-sealed, pneumatically actuated, SS valve system monitors up to 4 pumps with local or remote control and LCD status display. Internal mechanism has low particle generation design and is shielded in open and closed positions against particulate accumulation,...

Read More »
Fire Protection Valves handle pressures to 350 psi.
Gate Valves

Fire Protection Valves handle pressures to 350 psi.

Featuring nylon-coated finish and EPDM-encapsulated disc for good closure during shut downs, GD6765-8N grooved butterfly valve is gear-operated for slow-close functionality to protect piping from water shock. It is UL-/ULC-listed to 350 psi water working pressure and UL-listed for indoor/outdoor use. Additionally, F697-0 Class 250 iron body gate valve is rated to 300 psi and carries FM/NYC MEA...

Read More »
Gate Valves

Slide Valve dispenses repeatable solder paste dots and lines.

Achieving 20,000 dots/hr on 1 mm grid, SV-100 Slider Valve delivers dots of less than 300 -µm for solder paste types 4, 5, and 6 and dots as small as 125 -µm in diameter with type 6 paste. Used for dispensing into small and hard to reach places, it is compatible with lead-free and no-clean solder pastes as well as silver-filled epoxies. Valve is suited for solder paste dots for passive...

Read More »
Knife Gate Valve prevents slurry build up in seat area.
Gate Valves

Knife Gate Valve prevents slurry build up in seat area.

Designed for heavy slurry applications in power/mining industries, Series DX Slurry Knife Gate Valve discharges small amount of slurry each time it strokes, keeping gate path and seat area clear of entrapped particulates. Reinforced elastomer sleeves seal against each other when valve opens, and provide drop tight seal when it is closed. With seats which isolate/protect all metal parts from...

Read More »
Gate Valve supports heavy slurry applications.
Gate Valves

Gate Valve supports heavy slurry applications.

Suited for power and mining industries, Series DX provides drop tight shut-off in both directions. When valve opens, reinforced elastomer sleeves seal against each other and provide 100% full port opening, minimizing turbulence and wear. Seats isolate and protect all metal parts of valve from coming in contact with process. Each time valve strokes, it discharges small amount of slurry, keeping...

Read More »
Gate Valves feature 3 different connection types.
Gate Valves

Gate Valves feature 3 different connection types.

Fusion bonded and epoxy coated, AWWA C515 Gate Valves feature push-on, flange x flange, and mechanical joint connections, and are available with standard 2 in. operating nut or optional hand wheel. Non-rising stem flange x flange models come in 2-½-16 in., while non-rising stem push-on and mechanical joint gate valves are offered in 2-½-12 in. Valves are intended for installation on potable...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics