Gate Valves

Knife Gate Valve handles solids and abrasive substances.
Gate Valves

Knife Gate Valve handles solids and abrasive substances.

Designed for heavy industrial use, SKW Valve allows bi-directional flow of slurry. Unit features load distribution ring that prevents over compression during installation and ensures 100% sealing between ring sleeve and valve gate. Constructed with one-piece body, valve has universal tower that allows any actuator to be connected to tower structure. Tower also ensures that top plate, body, and...

Read More »
Fire Protection Valves are FM approved and UL Listed.
Gate Valves

Fire Protection Valves are FM approved and UL Listed.

Designed for vertical and horizontal installations, Pre-trimmed DV-5 Deluge Valve is suitable for deluge, pre-action, and special systems, such as foam-water and single- and double-interlock systems. Resilient Seated Gate Valves are designed for on/off operation in fire protection systems. Constructed with ductile iron body and- 5 O-rings for lifetime seal, OS&Y and Non-Rising Stem Post...

Read More »
Flowrox to Launch New Slurry Knife Gate Valve
Gate Valves

Flowrox to Launch New Slurry Knife Gate Valve

Finnish pump and valve supplier Flowrox will be launching a brand new Slurry Knife Gate Valve this Autumn. The new Slurry Knife Gate Valve, called Flowrox SKW, is specifically designed to meet Flowrox’s customers’ most demanding needs, as its service-friendly design provides reliable performance and easy maintenance. Flowrox SKW is especially designed for demanding and heavy industrial use....

Read More »
ECCO/Gregory Inc Now Provides Knife Gate Valve Assemblies
Gate Valves

ECCO/Gregory Inc Now Provides Knife Gate Valve Assemblies

Ecco/Gregory has provided knife gate valves to local customers since 1980.-  This includes applications in the following industries; pulp and paper, power, chemical, petrochemical, materials handling and conveying as well as with various OEM's. Recently we were asked to quote on a requirement which included the following components; air cylinder actuated valves, solenoid, target limit switches...

Read More »
Gate Valves

Vortex Improves Clear Action Slide Gate

SALINA, KAN., USA — Vortex's self-cleaning Clear Action Gate has been a reliable valve to handle powders, granular, or pellets in gravity flow or pneumatic conveying systems since its original release thirty years ago. Mounted horizontally, the machined square-edged blade mechanically clears the material from the sealing surfaces on each closing cycle allowing it to discharge beneath the...

Read More »
Inert 2-/3-Way Isolation Valves are designed for continuous duty.
Gate Valves

Inert 2-/3-Way Isolation Valves are designed for continuous duty.

Designed with all ports on bottom, manifold mount RVA Series has 16 x 27 mm footprint and includes 2-way NC, 2-way NO, and 3-way versions supplied with PEEK valve bodies and perfluoroelastomer diaphragms and seals as standard. PPS valve bodies and FPM or EPDM diaphragm and seals are available. Intended for fluid control in automated clinical, analytical, and biotech chemistry applications, rocker...

Read More »
Gate Valves

Vortex Improves Sanitary Gravity Slide Gate

SALINA, KAN., USA – Vortex Valves has improved its sanitary gravity valve, the Quick Clean Orifice Gate, with improved sealing performance, higher durability, easier maintenance, and fewer replacement parts. The Vortex Quick Clean Gate is designed to handle dry bulk ingredients in the food, dairy, pharmaceutical, chemical and other industries that require frequent or daily sanitation of...

Read More »
Gate Valves

Slide Gate handles sticky and/or abrasive powders.

Offered in 4–16 in. diameters, Model HDPV2 is suitable for handling powders, pellets, and granulars. Wide bonnet eliminates dead pocket where material could build up, while long body frame allows inspection and replacement of seals and- parts while gate remains in service. Valve also includes replaceable nylon insert on rising clevis, shimming system that compensates for seal wear, and...

Read More »
Slurry Knife Gate Valves incorporate Linatex® sleeves.
Gate Valves

Slurry Knife Gate Valves incorporate Linatex® sleeves.

Featuring Linatex® wear-resistant elastomer sleeves, Isogate® WS Series Wafer-Style Valves are suitable for abrasive and corrosive environments. Units provide bubble-tight, bi-directional shut-off with no downstream leakage, and have no seat cavity for solids to accumulate and prevent full gate closure. With fully interchangeable, 1-piece design and integral load distribution rings, valves...

Read More »
Multi-Cavity Needle Valve targets closure cap market. .
Gate Valves

Multi-Cavity Needle Valve targets closure cap market. .

Suited for processing polyolefins and styrene in shot weight range of 5-25 g, Series Z3150 allows optimized process control with balanced filling of all cavities by simultaneous opening of valve pins after certain amount of pressure has built up. Unit features nozzle front sealing diameter of 10 mm, body diameter of 16.5 mm, and finely scaled nozzle lengths from 80-180 mm. Needle valve pin can be...

Read More »

All Topics