Thermal Product Solutions Ships Gruenberg Granulation Dryer to the Pharmaceutical Industry
Fluid & Gas Flow Equipment

Thermal Product Solutions Ships Gruenberg Granulation Dryer to the Pharmaceutical Industry

New Columbia, PA – August 8, 2017: Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a Granulation Dryer to a manufacturer of pharmaceutical and nutritional products. This single pass granulation dryer is designed to dry 150 liters of water from pharmaceutical granulation. The maximum temperature rating of this pharmaceutical dryer is...

Read More »
GlobalMAX is embedded with Intelli-MAX software.
Food Processing & Preparation

GlobalMAX is embedded with Intelli-MAX software.

GlobalMAX® Abrasive Waterjets are offered in OMAX 80X, MAXIEM 1530 and GlobalMAX 1508 models. Suitable for reflective and nonconductive materials, unit’s software supports 90 different part file formats, standard 2D DXF files and 3D shapes. OMAX 80X jetmachining center comes with a Tilt-A-Jet cutting head and 50hp EnduroMAX pump. MAXIEM 1530 features A-Jet cutting head and 40hp pump. GlobalMAX...

Read More »
BLM Group USA to Feature New Tube Fabricating Solutions at FABTECH 2017
Food Processing & Preparation

BLM Group USA to Feature New Tube Fabricating Solutions at FABTECH 2017

Novi, MI - BLM GROUP USA, (www.blmgroup.com), a global leader in the manufacture of tube processing solutions will display its wide range of equipment at FABTECH 2017 in booth #B11010 at McCormick Place in Chicago. The company will feature its new LT8.10 fiber laser tube cutting system, along with its series of highly efficient and productive tube bending machines: SMART, ELECT 102 and E-TURN 52...

Read More »
Heat Shrink Tunnel Features Emergency Auto-Lift to Protect Conveyors, Bottles from Overheating - Pack Expo Booth #S-5800
Food Processing & Preparation

Heat Shrink Tunnel Features Emergency Auto-Lift to Protect Conveyors, Bottles from Overheating - Pack Expo Booth #S-5800

Pharmafill™ HT6B Heat Tunnel Automatically Rises Above Conveyor for Cooling Wall, NJ: The Pharmafill™ HT6B Heat Tunnel from packaging machinery manufacturer Deitz Co., Wall, NJ (www.Deitzco.com), features an optional Emergency Auto-Lift (EAL) that automatically raises the heat tunnel high above the conveyor in the event of a power failure and/or when the operator stops the conveyor by E-stop...

Read More »
Sponsored

EIGA- An Innovative Production Method for Metal Powder from Reactive and Refractory Alloys

1.|Introduction|1-2 2.|Practical limitations of the EIGA process|2-4 3.|Development Program|4 3.1|Modeling|4-5 3.2|Experimental work|5 3.3|Results|5-7 4.|Conclusion and outlook|7 5.|Literature|7 6.|Figures| 6.1|Schematic and working principle of the EIGA atomization system|2 6.2.1|Incorrectly turned drip melt|3 6.2.2|Correctly turned drip melt|3 6.3.1|Magnetic field of conical HF induction coil|4 6.3.2|Resulting electrode temperature|4 6.4|Particle size distributions for EIGA atomization test runs|6 7.|Tables| 7.1|Process data of EIGA system|2 7.2|Material properties of feedstock material for EIGA test runs|5

Read More »
Fluid Extractors/Dispensers come with rubber grip.
Chemicals & Gases

Fluid Extractors/Dispensers come with rubber grip.

Fluid Extractors/Dispensers are available in 616 and 617 models. Units come with 1.5-liter fluid reservoir, twist-valve and dual-seal piston and are used to transfer fluids. Featuring polymer-based construction and double-seal design, products are equipped with 16 in. hose, integrated stand and twist-valve on the hose end. Model 616 is suitable for fluid transfer from master cylinders, power...

Read More »
Hard Wire Cutter Cuts Both Ends Perfectly Square
Food Processing & Preparation

Hard Wire Cutter Cuts Both Ends Perfectly Square

An ergonomic hard wire flush cutter that features retaining clamps that hold the wire securely and perpendicular to the jaws to assure square cuts to both ends is available from Xuron Corp. of Saco, Maine. The Xuron® Model 2193F Hard Wire Cutter features self-adjusting clamping fixtures which hold the wire being cut securely and perpendicular to the robust cutter jaws for a clean cut on both...

Read More »
Fluid & Gas Flow Equipment

Wire and Tube Processing System comes with 100 programmable jobs.

M700 Modular Series Wire and Tube Processing System is designed to cut wire and tubing material using multiple style cutting modules. Unit operates in an input power range of 100 - 240 VAC at 50/60Hz. Product is offered in M700F feeder, M700TW tube and wire cutter, M700ST small tube cutter and M700LT large tube cutter modules. M700TW uses a pneumatic guillotine style cutter head whereas M700ST...

Read More »
M2136 Finishing Cutter features Torx Plus screws.
Food Processing & Preparation

M2136 Finishing Cutter features Torx Plus screws.

M2136 Multi-Tooth Close Pitch Finishing Cutter’s inserts are available in B67 and D67 variants. Unit is offered in diameters ranging from 50 to 160 mm. Product comes with Walter's Tiger•tec® silver coating in three CVD coated grades such as WAK15, WKP25S and WKP35S. B67 insert produces maximum cutting-edge stability whereas D67 is suitable for universal applications. M2136 features eight...

Read More »
Pipe Beveling Machine Creates J-Preparation for Orbital Welding
Food Processing & Preparation

Pipe Beveling Machine Creates J-Preparation for Orbital Welding

A heavy-duty I.D. clamping pipe milling end prep tool that can J-prep bevel, face, and bore all hard pipe alloys in preparation for orbital welding is available from ESCO Tool of Holliston, Massachusetts. The Esco Prepzilla MILLHOG® I.D. Clamping End Prep Tool is offered with a wide selection of cutting blades including a J-preparation blade that creates a consistent contoured radius and clean...

Read More »
Fluid & Gas Flow Equipment

XLERATOR

EAST LONGMEADOW, Mass. – Brooklyn Bowl, a 16-lane bowling alley, music venue and restaurant, is equally known for its aesthetic as its entertainment. Described as “one of the most amazing places on Earth” by Rolling Stone, Brooklyn Bowl has played host to a slew of top acts including Guns N’ Roses and Elvis Costello, and now counts among its offerings a top brand: XLERATOR® Hand Dryers...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics