Platinum Tools
Signal Generators

Platinum Tools

Now Available, the ToneMaster™ & ToneSeeker™ Make Easy Work of Tracing & Locating Cables and Cable Ends NEWBURY PARK, Calif., Oct. 3, 2017 - Platinum Tools® (www.platinumtools.com), the leader in solutions for the preparation, installation, hand termination and testing of wire and cable, is proud to announce the launch of the new ToneMaster™ High Powered Tone Generator (p/n TG210C /...

Read More »
Aven
Cutters and Cutting Machinery

Aven

Stealth Cutters are manufactured from a high-performance Japanese steel, giving them exceptional strength and durability. The induction hardened cutting edges provide superior performance and our proprietary grinding process of the blades ensure a crisp clean cut each time. These cutters feature a non-reflective satin finish, as well as a unique screw joint design for perfect blade alignment...

Read More »
Steadyline feature vibration dampening system.
Machine Bars

Steadyline feature vibration dampening system.

Turning/Boring Bars are available in 2.36 in. and 3.15 in. diameter sizes. Suitable for oil and gas applications, units feature a BA connection. Products come with BA adapter which is used to mount GL50 turning heads. Steadyline® is offered in 6xD, 8xD and 10xD bar sizes and in Seco-Capto™ C6, C8 and HSK-T types. Turning bars are equipped with coolant supply channels and boring heads.

Read More »
ProtoMAX is equipped with 5 HP pump.
Waterjet Cutters and Cutting Machinery

ProtoMAX is equipped with 5 HP pump.

Suitable for prototyping and low volume cutting material under 2 in. thickness such as glass, granites, metals, wood and plastic in small job shops, engineering classrooms and makerspaces, ProtoMAX® Waterjet Cutter delivers a cutting speed of 30,000 psi. Unit’s pump and cutting table are placed on casters for easy movement. Product is plugged into 240 V AC dryer-style outlet.

Read More »
Sponsored

New Advances in Edge Conditioning Technology

1.|General Skiving Machine Advances|1 1.1.|Traditional Limitations and Some General Solutions|1 1.2.|Rocker Carriage Tooling|3 1.3.|Vibratory Tooling|3 1.4.|Wide Spectrum Tooling|5 2.|Special Variations of Skiving Machines for Wide Thin Materials|6 3.|Rolling Type Edger Advances|7 3.1.|Practical Solutions|7 3.2.|Hybrid Roll Type Edging Machines|8 4.|Milling Type Edgers|8 5.|Cut Strip Edging|9 6.|Further Outlook and Conclusion|10 7.|References|10 8.|Figures| 8.1.|Diagram of Traditional Skiving Machine|2 8.2.|Diagram of Rocker Carriage Anti Chatter Edge Following Tooling|2 8.3.|Rocker Carriage Type Mini Edger for General Purpose Deburring|3 8.4.|Skiving Line Bevelling Aluminum Using Rocker Carriage Tooling|3 8.5.|Orbital Tooling Motor Driven Edger Was Step in Vibratory Tooling Development|3 8.6.|Diagram of Vibratory Tooling Arrangement|4 8.7.|Vibratory Surface Skiver Cutting at 25 mm/sec|4 8.8.|Vibratory Tool Edger Installed in Slow Speed Tubemill|4 8.9.|Wide Width Transformer Copper Vibratory Tool Edger with Edge Flattening Rolls|5 8.10.|Electromagnetic Vibratory Tool Edger Uses Rocker Carriage Tooling and Is Low Cost Alternative to Magnetostrictive Tooling for Low Precision Applications|5 8.11.|Floating Guide Compensated Tool Type Follows Edges Yet Can Still Cut to Precise Depth and Has Presettable Rake Angle|5 8.12.|Fully Remotely Operated Electronically Controlled Floating Type Tooling Is Now Possible with Auto Edge Following and Nine Slot Indexing for Thin Materials|6 8.13.|Manually Adjustable Version of Guide Compensated Tool Indexing Skiving Machine|6 8.14.|Wide Width Thin Material Round Edger Operating Wet|7 8.15.|Heavy Duty Auto Rollchange Multi Thickness Rolling Type Edger|8 8.16.|Cascaded Module Rolling Type Edger with Edge Thickening Correction Exit Pullthrough Rolls|8 8.17.|Milling Type Tubemill Edger Has Easily Readable Tool Feed and Indexing Digital Readouts|9 8.18.|Fully Automatic Cut Strip Edger Has Inlet, Exit Cut Strip Stack Magazines|9

Read More »
G1221-P Monoblock Boring Bar features UF8 chip geometry.
Machine Bars

G1221-P Monoblock Boring Bar features UF8 chip geometry.

G1221-P Monoblock Boring Bar features two coolant holes and is designed for recessing and internal grooving. Product is suitable for internal grooves from Dmin = 0.63 in. and for grooving up to depths of 0.39 in. in all ISO material groups. Boring bar is compatible with GX09 and GX16 inserts and insert widths ranging from 0.062 to 0.125 in. G1221-P can be used in normal and overhead position....

Read More »
Lee HI-BAR
Screens

Lee HI-BAR

The Challenge Protecting components from contamination is essential in critical fluid control applications, such as those found in the aerospace, power generation and automotive industries. While many systems are designed to be relatively immune to low levels of small size contaminants, single larger rogue particles can cause blockages which could result in system failure and downtime. The...

Read More »
GX Tiger come with silver flank face.
Cutters and Cutting Machinery

GX Tiger come with silver flank face.

GX Tiger·tec® Silver CVD Grooving and Parting Grades are offered in WKP13S, WKP23S and WKP33S models. These unit’s Silver CVD coating features aluminum oxide for maximum crater wear resistance and improved cutting speed. The WKP13S model is used in high alloy, bearing and carbon steels whereas WKP33S offers maximum toughness. WKP23S Universal grade is used in application ranging from...

Read More »
35+ Years of Helping Stop False Fire Alarms
Covers

35+ Years of Helping Stop False Fire Alarms

September 6, 2017 - STI announces their Stopper II® pull station protective cover, which mounts directly to the wall over an existing pull station, has helped stop false fire alarms for over 35 years. When the cover is lifted, a self-contained alarm sounds, drawing immediate attention to the area. The cover helps deter pranksters from triggering false fire alarms, reducing unnecessary business...

Read More »
Thermal Product Solutions Ships Gruenberg Granulation Dryer to the Pharmaceutical Industry
Dryers

Thermal Product Solutions Ships Gruenberg Granulation Dryer to the Pharmaceutical Industry

Thermal Product Solutions, a global manufacturer of thermal-processing equipment, announced the shipment of a Granulation Dryer to a manufacturer of pharmaceutical and nutritional products. This single pass granulation dryer is designed to dry 150 liters of water from pharmaceutical granulation. The maximum temperature rating of this pharmaceutical dryer is 150°F, and the work chamber dimensions...

Read More »

All Topics