Fittings

Remote Actuation Systems and Push/Pull Control Cables

CMA has pioneered the design, development and manufacture of a complete line of products for the remote actuation of latches, catches, mechanisms and locking gas springs. Consisting of custom designed actuators, cable controls and operators, the products provide a complete system for a wide range of mechanical applications. These systems offer many benefits when compared to conventional rods,...

Read More »
Railing System features structural, slip-on pipe fittings.

Railing System features structural, slip-on pipe fittings.

Designed to build ADA-compliant handrails for stairs, ramps, and walkways, Series 500 ADA Railing System comes with galvanized KlampÂ-® iron pipe fittings to provide contiguous gripping surface. Unit is comprised of horizontal bars supported by vertical, upright posts assembled from modular fittings and standard 1Â-¼ in. Schedule 40 pipe. System can be designed for new construction or...

Read More »
NPT Valves and Fittings suit high-pressure environments.

NPT Valves and Fittings suit high-pressure environments.

Designed for safe plumbing, NPT valves and fittings are made of 316 stainless steel. Pipe connection valves come in 2-way straight and 2-way angle body configurations, in 1/8, Â-¼, 3/8, Â-½, Â-¾, and 1 in. sizes, and are engineered for optimal repeatable quality. Fittings, available as elbows, tees, and crosses, accommodate 10,000 or 15,000 psi and all above-listed NPT tubing...

Read More »
Orifice Fitting conforms to API 14.3, AGA 3, and ISO 5167.

Orifice Fitting conforms to API 14.3, AGA 3, and ISO 5167.

Daniel-® Senior-® Model 2000(TM) Orifice Fitting is designed with greaseless isolation valve that provides bubble tight seal, to reduce personnel exposure to pipeline content. Operation up-time is increased and maintenance reduced, by use of plate release mechanism that helps remove stuck plate carrier from metering position. Standard o-rings allow for reusability, while retractable locking pin...

Read More »
Barbed Connector is made of FDA-approved polypropylene.

Barbed Connector is made of FDA-approved polypropylene.

Available in Â-¼, 3/8, and Â-½ in. sizes, Y style Thermobarb FDA PP barbed fitting works with soft, flexible tubing such as silicone or thermoplastic rubber and are suitable for single-use tubing assemblies. Connector features tapered lead barb for tight fit and reduced leakage, and smooth surface allows for unrestricted, uniform flow. It has operating temperature range of 10-220Â-

Read More »

Metric Tube Fitting System offers leak-proof operation.

Utilizing 2-edge cutting ring and soft-seal technology, WALRing System withstands operating pressures up to 11,600 psi with 4:1 burst rating. It is offered in sizes from 6-42 mm and built to ISO 8434-1/DIN 2353 standard. Assembly of WALRing connections is achieved by using WALRing System nut and Viton soft seal in combination with Walterscheid fitting bodies. System is suited for hydraulic...

Read More »
Miniature Compression Fittings suit 1/4 in. OD tubing.

Miniature Compression Fittings suit 1/4 in. OD tubing.

Featuring 10-32 thread, straight brass Model MCB-14 and 303 SS Model MCB-14-303 measure 53/64 in. long and are designed with Â-½ in. hexagonal body. Elbow compression fittings include brass Model MCBL-14 and 303 SS Model MCBL-14-303, which are 59/64 in. long and have installed height of 21/32 in. All provide leak-tight seal for tubing connections. Seal options include Buna-N, Fluorocarbon,...

Read More »
Instrumentation Fittings provide leak-proof connection.

Instrumentation Fittings provide leak-proof connection.

Comprised of nut, back ferrule, front ferrule, and body, fittings produce torque-free seals that reduce hazardous leaks at tubing connections. Ferrules are tightly swaged around tube, and lack of initial strain on tubing ensures no tubing wall damage. Axial movement along tube prevents torque transmission from fitting to tubing. Resistant to temperature change, fittings work with variety of tube...

Read More »
Flange Adapters come in connection sizes from -½ - 4 in.

Flange Adapters come in connection sizes from -½ - 4 in.

Machined from round stock, one-piece Brennan flange adapters are hot-piercing bent for desired angle. Available in carbon and stainless steel to withstand high pressures, adapters feature swept configurations that allow them to function in limited clearance application situations.

Read More »
High Pressure Fittings come with PEEK or stainless nut.

High Pressure Fittings come with PEEK or stainless nut.

With 2-56 threads, 360 Â-µm High Pressure Fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without using liners. Lead-free connection that seals at pressures in excess of 20,000 psi can be formed with available manual tool. PEEK nut is supplied with glass-filled PEEK ferrule, while stainless nut uses 316 SS ferrule. Ferrule snaps...

Read More »

All Topics