Beswick's Latest MFM Series Flare Fittings with Threaded End Insures Leak-Tight Connection
Beswick’s MFM Series 37 degree Flare Fittings are offered with 10-32 UNF, 1/4-28 UNF, and 5/16-24 UNF thread sizes. Units come with O-ring face seal gland for a leak-tight connection between flare fitting and mating component. The fittings are designed for use with stainless steel, copper and aluminum metallic tubing with 1/8 in. OD and 1/4 in. OD.
Read More »
F1960 Transition Fittings are rated to 100 PSI pressure at 180°F.
Marto-Norca’s F1960 Transition Fittings (CPVCPXCELF) is made of molded CPVC connector, rubber O-ring, and brass Pex connector. These units are available in 1/2, 3/4 and 1 in. sizes and are suitable for residential and light commercial plumbing systems.
Read More »
Rockler Expands Line of Dust Right Innovations - Seven New Accessories Improve Organization, Function of Dust Systems
Rockler Woodworking and Hardware has introduced seven new dust collection solutions to its line of Dust Right products. This wave of solutions includes several "missing links" to enhance the performance of existing dust collection setups, providing tighter fitting connections as well as out-of-the-way pipe installation and hose management accessories. MEDINA, MINN. - FEBRUARY 06, 2018 - Rockler...
Read More »
Quick-Release Grease Coupler comes with hardened 4 jaws.
LX-1403 Heavy Duty Quick-Release Grease Coupler offers working pressure of 15,000 PSI and burst pressure of 22,000 PSI. Unit is suitable for battery powered or air operated grease guns and bulk grease pumps. Product comes in 2.9 in. length x 1.2 in. height and is integrated with 1/8 in. NPT connection. Grease coupler is compatible with SAE and metric grease fittings and features ergonomic thumb...
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »
Bridgeport's Mighty-Bite® Push-EMT® Fitting Garners 'ShowStopper' Award at NECA 2017 Seattle
STRATFORD, Conn. (October 16, 2017) – Bridgeport Fittings’ Mighty-Bite Push-EMT 381-MB grounding bushing was named a ‘ShowStopper’ at the NECA 2017 Seattle trade show, held at the Washington Convention & Trade Center, Oct. 7-10. The ‘ShowStopper’ is a prestigious industry award that honors the newest innovations in products and services for electrical construction professionals....
Read More »
Zatkoff's Die Cut Solutions in a Snap
At Zatkoff Seals & Packings, we love a challenge. Our clients rely on us for innovative solutions, and we are always ready to step up to find them. Recently, a client needed a gasket that had to meet specific temperature and fluid requirements for transmission fluids. This meant that some materials were out of the question, and that whatever we did use, needed to be corrosion resistant, while...
Read More »
See the Difference 'Orange Makes™' at NECA Seattle 2017
Bridgeport Fittings’ exhibit will show contractors how its solutions save time, boost quality and increase productivity STRATFORD, Conn. (September 18, 2017) – Visitors to Bridgeport Fittings’ NECA 2017 exhibit will learn about the latest innovations in electrical fittings, as well as Bridgeport’s value-added support services assembled by its “Team Done That.” This technical sales...
Read More »
Bioprocessing Components from Qosina
Qosina carries a wide variety of bulk, non-sterile bioprocessing components that are in-stock and ready for immediate shipment. Our line of bioprocessing accessories includes Pharmafluor(R) tubing, barbed connectors and flanges, sanitary flanges, press-in barbed plugs, compression fittings, as well as tube and flange clamps in various sizes and colors to accommodate all of your project...
Read More »
Bridgeport's Innovative Solar Installation Solutions Help Electrical Contractors be More Productive and Profitable on the Jobsite
High-quality, high-performance products from Bridgeport are engineered to meet exacting demands of solar installations STRATFORD, Conn. (Aug. 28, 2017) – Electrical contractors, who are helping to build the renewable energy infrastructure, need high-performance, high-quality products to meet the demands of today’s solar installation projects. Addressing these contractor needs, Bridgeport...
Read More »
Matco-Norca Expands Industrial Products Line
Company Offers Full Selection of Industrial Grade Stainless Steel & Carbon Steel Valves & Fittings/Nipples Brewster, NY, August 21, 2017 – Matco-Norca has expanded its line of industrial grade products with the addition of stainless steel and carbon steel valve offerings as well as stainless steel fittings and nipples. Industrial products from Matco-Norca also include actuated direct mount ball...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
