Fittings

Base Fittings require no welding, threading, or drilling.
Fittings

Base Fittings require no welding, threading, or drilling.

Designed for use with 1Â-¼ in. and 1½ in. standard pipe, Kee Lite® base fittings are constructed of high-grade Aluminum Silicon Magnesium. Model L150 provides heavy-duty, 4-point fixing base flange for use when structural fitting is required. Model L152 provides either 4-point fixing base or wall flange. Fittings are corrosion-resistant and intended for indoor or outdoor use....

Read More »
Quick Disconnects suit vacuum and pressure switches/sensors.
Fittings

Quick Disconnects suit vacuum and pressure switches/sensors.

Micro and nano quick disconnects, offered with screw-plug connections, eliminate assembly process of joining/soldering wires together. Quick disconnects are straight, compact, and moisture resistant to NEMA 6P and IP 68 protection. Male and female 3-pin nano connectors are compatible with M8 single keyway, while male and female 5-pin micro connectors are compatible with M12 single keyway.

Read More »
Skylight Railing System does not penetrate roof membrane.
Guardrails and Railings

Skylight Railing System does not penetrate roof membrane.

KeeGuard® freestanding railing system installs around rooftop skylights to protect against falling. Constructed of Kee Klamp® slip-on pipe fittings and schedule 40, 1Â-½ in. standard pipe, both fittings and pipe are galvanized for corrosion resistance. System does not block light, and is possible to install further from edge so it is not seen through skylight. Minimum size is 10...

Read More »
Liquidtight Fittings are UL listed and CSA approved.
Fittings

Liquidtight Fittings are UL listed and CSA approved.

NEER® Type LMM zinc die-cast fittings provide method of terminating and sealing liquidtight flexible metal conduit to boxes or enclosures. Ball-burnished surface finish assures long life, even in wet locations. Fittings can connect with tapered thread female entry or unthreaded knockout by using furnished sealing washer and locknut. Fittings are offered in straights and angles from 3/8 to 4...

Read More »
Swivel Fittings are intended for indoor or outdoor use.
Fittings

Swivel Fittings are intended for indoor or outdoor use.

Kee Lite® In-Line Swivel Fittings are constructed of high-grade Aluminum Silicon Magnesium providing corrosion resistance. Fittings include model L19 to form variable angle joints between 60 and 200 deg; model LB54, designed as in-line variable angle connection, adjustable from 45 to 200 deg; and model L114 internal swivel fitting to accommodate varying angles on handrails. Designed for use...

Read More »
Fittings compensate for movement between conduits.
Fittings

Fittings compensate for movement between conduits.

Type DX Deflection/Expansion fittings allow for movement between conduit ends in areas with rotating equipment or heavy vehicle traffic. They connect Rigid Metal conduit and IMC conduit, allowing for movement of up to 3/4 in. or 30% of angular misalignment in any direction due to their pliable neoprene sleeve. Type DX Deflection/Expansion fittings are available in trade sizes from 1/2 to 6 in.

Read More »
Steel Fittings connect lengths of EMT conduit.
Fittings

Steel Fittings connect lengths of EMT conduit.

ETP® line of steel connectors and couplings come in 4 styles with sizes from 1/2 to 4 in. Type 4000 set-screw connectors and Type 5000 set-screw couplings have steel walls with zinc plating. Type 6000 compression couplings are UL/CSA listed as concrete-tight without taping. Type 7000 compression connectors have NPS male hub thread and are available with insulated throat. They are UL/CSA...

Read More »
Instrumentation Fittings handle high pressures.
Fittings

Instrumentation Fittings handle high pressures.

MPI(TM) connectors operate at pressures of 6,000 to 15,000 psi, making them suitable for equipment used to operate feed lines, processing lines, and other systems within industrial labs. Four-part fittings can be used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in....

Read More »
Liquidtight Fittings suit space-sensitive environments.
Electrical Connectors

Liquidtight Fittings suit space-sensitive environments.

Liquidtight/raintight/oiltight 4Q Connectors offer slim profile for tight turning radius. They are available in trade sizes of 3/8 to 6 in. with straight, 45 deg, and 90 deg insulated or non-insulated body design. Body and nut are made of zinc-plated malleable iron. Extra long hub enables use of bushings to protect conductors from abrasion. Sealing gasket and locknut are included.

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers