Fittings

Fittings

Push-In Fittings work with variety of media.

Manufactured from non-toxic materials, grey acetal push-in fittings feature oval collet design that produces secure and practical connection. They can be used with air, gases, vacuum, and liquids in applications such as water purification, food/beverage, and pneumatic systems. All fittings meet US FDA, WRAS, ANSI/NSF-51, 61, and SK Zert requirements.

Read More »
Fittings feature integrated filters.
Fittings

Fittings feature integrated filters.

Fittings with integrated in-line filters for air, vacuum, or liquid service applications enable reduction of system components. Standard products are equipped with 43 micron nylon filtration and nylon bodies, and are available in straight, elbow, tee, or coupling configurations. Optional materials and colors are available.

Read More »
NPT Valves and Fittings suit high-pressure environments.
Fittings

NPT Valves and Fittings suit high-pressure environments.

Designed for safe plumbing, NPT valves and fittings are made of 316 stainless steel. Pipe connection valves come in 2-way straight and 2-way angle body configurations, in 1/8, Â-¼, 3/8, ½, ¾, and 1 in. sizes, and are engineered for optimal repeatable quality. Fittings, available as elbows, tees, and crosses, accommodate 10,000 or 15,000 psi and all above-listed NPT tubing...

Read More »
Orifice Fitting conforms to API 14.3, AGA 3, and ISO 5167.
Fittings

Orifice Fitting conforms to API 14.3, AGA 3, and ISO 5167.

Daniel® Senior® Model 2000(TM) Orifice Fitting is designed with greaseless isolation valve that provides bubble tight seal, to reduce personnel exposure to pipeline content. Operation up-time is increased and maintenance reduced, by use of plate release mechanism that helps remove stuck plate carrier from metering position. Standard o-rings allow for reusability, while retractable locking...

Read More »
Barbed Connector is made of FDA-approved polypropylene.
Fittings

Barbed Connector is made of FDA-approved polypropylene.

Available in Â-¼, 3/8, and ½ in. sizes, Y style Thermobarb FDA PP barbed fitting works with soft, flexible tubing such as silicone or thermoplastic rubber and are suitable for single-use tubing assemblies. Connector features tapered lead barb for tight fit and reduced leakage, and smooth surface allows for unrestricted, uniform flow. It has operating temperature range of...

Read More »
Fittings

Metric Tube Fitting System offers leak-proof operation.

Utilizing 2-edge cutting ring and soft-seal technology, WALRing System withstands operating pressures up to 11,600 psi with 4:1 burst rating. It is offered in sizes from 6-42 mm and built to ISO 8434-1/DIN 2353 standard. Assembly of WALRing connections is achieved by using WALRing System nut and Viton soft seal in combination with Walterscheid fitting bodies. System is suited for hydraulic...

Read More »
Miniature Compression Fittings suit 1/4 in. OD tubing.
Fittings

Miniature Compression Fittings suit 1/4 in. OD tubing.

Featuring 10-32 thread, straight brass Model MCB-14 and 303 SS Model MCB-14-303 measure 53/64 in. long and are designed with Â-½ in. hexagonal body. Elbow compression fittings include brass Model MCBL-14 and 303 SS Model MCBL-14-303, which are 59/64 in. long and have installed height of 21/32 in. All provide leak-tight seal for tubing connections. Seal options include Buna-N, Fluorocarbon,...

Read More »
Instrumentation Fittings provide leak-proof connection.
Fittings

Instrumentation Fittings provide leak-proof connection.

Comprised of nut, back ferrule, front ferrule, and body, fittings produce torque-free seals that reduce hazardous leaks at tubing connections. Ferrules are tightly swaged around tube, and lack of initial strain on tubing ensures no tubing wall damage. Axial movement along tube prevents torque transmission from fitting to tubing. Resistant to temperature change, fittings work with variety of tube...

Read More »
High Pressure Fittings come with PEEK or stainless nut.
Fittings

High Pressure Fittings come with PEEK or stainless nut.

With 2-56 threads, 360 Â-µm High Pressure Fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without using liners. Lead-free connection that seals at pressures in excess of 20,000 psi can be formed with available manual tool. PEEK nut is supplied with glass-filled PEEK ferrule, while stainless nut uses 316 SS ferrule. Ferrule...

Read More »

All Topics