Electronic Converters

Electronic Converters

A/D Converters offer serial LVDS interface.

Models ADS8413 and ADS8410 use serial LVDS outputs to provide up to 200 Mbps data transfer. Devices offer low power dissipation of 290 mW at 2 MSPS with 2 additional power-saving modes. With pseudo-bipolar, differential input ADS8413 features -107 dB total harmonic distortion (THD), 92 dB signal-to-noise ratio (SNR), and ±1 LSB integral nonlinearity (INL). ADS8410 has unipolar, single-ended...

Read More »
Serializer/Deserializer provides 15 kV ESD protection.
Electronic Converters

Serializer/Deserializer provides 15 kV ESD protection.

Using low-power, low-EMI CTL(TM) technology, Â-µSerDes(TM) Model FIN224AC reduces 24 or 12 parallel LVTTL signals typically required in ultra-portables to single differential serial signal, eliminating number of wires in application while also removing problematic electromagnetic radiation from data paths. Lead-free device eliminates need for EMI shielding and filters to facilitate design of...

Read More »
Multiplexing Converter targets tactical market.
Electronic Converters

Multiplexing Converter targets tactical market.

Featuring modular circuitry, Model CV-MCU2 can be software-configured to perform CDI/NRZ/Fiber conversions or up to 4:1 multiplexing in single 1 RU chassis. Integrated modules support up to five 20 Mbps protocol conversions and can be used to multiplex up to 4 digital trunk groups onto single 16 Mbps aggregate. Tactical user can configure single unit as multiplexer, modem, or combination,...

Read More »
Electronic Converters

Digital Signal Controllers offer 60 MHz performance.

Helping embedded control designers make transition to 32-bit DSP-based controllers, TMS320F280x Series features 32-bit wide data path and mixed 16/32-bit instruction set. With 150 ps resolution, pulse width modulator provides 16 bits of accuracy in 100 KHz control loop and 12 bits at 1.5 MHz. Depending on device, communication interfaces include CAN, I2C, UART, and SPI ports. Applications include...

Read More »
Miniature, 1 W DC/DC Converters feature 3 kV isolation.
Electronic Converters

Miniature, 1 W DC/DC Converters feature 3 kV isolation.

Supplied in RoHS-compliant package measuring 20 x 8 x 10 mm, DCH01 series provides up to 85% efficiency and meets UL60950 specifications with EN55022 Class B EMC performance. Unregulated dc/dc converters offer point-of-load power conversion and ground loop elimination for noise-sensitive applications. With open-frame design, plug-in power modules operate from 5 V input and provide single voltages...

Read More »
Analog-to-Digital Converter achieves 4 MS/sec.
Electronic Converters

Analog-to-Digital Converter achieves 4 MS/sec.

Featuring fully differential input with pseudo bipolar input range of -4 to +4 V, SAR Model ADS8422 includes either full 16-bit interface or two 8-bit option modes so data can be read in cycles if necessary. Device provides 92 db signal-to-noise ratio and -102 dB total harmonic distortion. Operating over industrial temperature range of -40 to +85°C, converter is suited for medical imaging,...

Read More »
Electronic Converters

Converter Boards include RS-422-A differential drivers.

With Model 2779500 resolver-to-digital converter board, users can have ruggedness of resolver and simplicity of digital interface. Model 2779501 converts inductosyn® scale signal to digital signal and interfaces with existing wires so re-wiring is not required. Unit excites slider with sine and cosine excitation and uses phase shifted, pre-amplified scale return to generate A-quad-B signals.

Read More »
A/D Converter suits high-speed data acquisition systems.
Electronic Converters

A/D Converter suits high-speed data acquisition systems.

Housed in 40-pin, triple-wide SMT DIP, dual sampling Model ADSD-1410S features two 14-bit ADCs, sampling rate of 10 MS/sec, and input range of ±2.5 V. Standard product is rated for 0 to +70°C, while Model ADSD-1410S-EX operates from -55 to +125°C. Suited for time and frequency domain applications, converter provides integral non-linearity and differential non-linearity...

Read More »
Converter Chip adds FAT file storage to microcontrollers.
Electronic Converters

Converter Chip adds FAT file storage to microcontrollers.

Used with any microcontroller, uALFAT(TM) converts serial data to PC-compatible FAT files so they can be saved in directories in standard FAT file system format. Stored data can be accessed from any device that supports FAT file system, such as PCs, digital cameras, and MP3 players. File read/write speeds up to 60,000 bytes/sec can be made for Secure Digital and Multimedia Cards. Housed in 48-pin...

Read More »
Dual ADC optimizes basestation transceivers.
Electronic Converters

Dual ADC optimizes basestation transceivers.

With power dissipation of 395 mW per channel, 14-bit, 125 Msps Model LTC2285 features integrated bypass capacitance and 50 ohm series output matching. Users can choose between 2 input spans of 1 or 2 Vp-p. Housed in 9 x 9 mm QFN package, converter offers data-ready clock-out pin for latching output data buses. It is optimized for undersampling signals up to 140 MHz, has analog input bandwidth of...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers