Electronic Converters

ADC can handle demanding applications.
Electronic Converters

ADC can handle demanding applications.

Designed for software-defined radio, diagnostic imaging, and radar/signals intelligence, Model ICS-1650 high-speed ADC features four 12-bit analog input channels with simultaneous sampling at up to 250 MHz. It has 4-lane PCI Express interface that provides up to 1.25 GB/sec net payload data rate, enabling continuous data acquisition at sample rates exceeding 200 MHz on all 4 channels. Unit comes...

Read More »
Electronic Converters

All-In-One Converter facilitates transition to digital TV.

Offered in 1-RU chassis, IRP-3910 Integrated Receiver Processor combines multi-channel professional decoder, processor, and down-converter to aid transition from analog to ATSC digital television broadcast for cable operators. Unit provides up to 4 channels of HD decoding along with dynamic aspect ratio conversion. In addition to professional decoding capabilities, multiplexing core enables...

Read More »
Electronic Converters

Digital/Mixed-Signal Buck Controller suits Intel processors.

Supporting Intel VR11.x designs that deliver up to 150 A, CHL8100 digital mixed-signal, multiphase, synchronous buck controller can be used with CHL8500 high-frequency dual MOSFET gate driver. Designers can digitally configure switching frequency of each phase from 200 kHz up to 1 MHz. Power Designer GUI can be used to access, set, modify, and monitor parameters, which are stored in embedded...

Read More »
Electronic Converters

I/O Tranceivers comply with GBIC Revision 5.5.

Models GPIM-01 and GPIM-09 are Gigabit Interface Converters (GBICs) that support 850, 1,310, and 1,550 nm wavelength, 1.25 and 1.0625 Gbps data rate, and 300 m to 10 km working distance. Suited for high performance, point-to-point communication requiring gigabit or fiber channel interconnections, hot pluggable units feature low EMI and low power dissipation. They are compliant with IEC 60825-1...

Read More »
PC-Based Digitizer is suited for OEMs.
Electronic Converters

PC-Based Digitizer is suited for OEMs.

Designed for OEMs who require analog-to-digital conversion in their systems, BASE-8 CompuScope Digitizer offers single digitizing channel with 8-bit resolution, 200 MHz bandwidth, and up to 500 MS/sec sampling speeds. Customizable features include channel counts (2 or more channels), up to 2 GS/sec sampling rates, eXpert on-board FPGA signal analysis functionality, advanced timing signals, memory...

Read More »
Electronic Converters

SD/HD SDI Converter facilitates A/D signal integration.

Offered as external, hardware-based solution, AT-HDSDI-AV enables instant integration of legacy devices into professional broadcast level AV systems without extensive pre-editing and conversion. It takes in any SDTV or HDTV resolution signal from SDI source and converts it to analog format such as Composite, VGA (RGBHV), or Component (YPbPr) as well as digital formats such as DVI and HDMI. It...

Read More »
MCUs enable addition of USB to any application.
Electronic Converters

MCUs enable addition of USB to any application.

Including Models PIC18F13K50 and PIC18F14K50, Series PIC18F1XK50 8-bit PIC® microcontrollers include host of serial communication interfaces, such as USB 2.0, I2C(TM), SPI, and USART, enabling them to transfer data between USB and other embedded serial networks. They also provide 10-bit, 9-channel ADC and dual comparators with S/R Latch. Model PIC18F13K50 has 8 Kb Flash and 512 Bytes of RAM...

Read More »
Gateway suits building automation or process control network.
Electronic Converters

Gateway suits building automation or process control network.

Model FS-B2510 Dual-Serial Port Converter/Gateway includes 2 serial ports and 1 Ethernet port for integration from serial-to-serial (RS-232 or RS-485) or serial-to-Ethernet applications. Using extensive protocol library and configuration capabilities, unit allows integration of devices to building automation or process control networks, such as integrating fire alarm control panel to a BACnet...

Read More »
PC-104 Card acts as LVDT/RVDT-to-digital converter.
Electronic Converters

PC-104 Card acts as LVDT/RVDT-to-digital converter.

DSP-based 73LD4 includes 6 independent, isolated, programmable LVDT/RVDT tracking converter measurement channels, each featuring 16-bit resolution, 0.025% FS accuracy, 150 strokes/sec max tracking rate, digital velocity output, incremental encoder outputs, and wrap-around self-test. Operating over 360 Hz to 10 KHz range, each unit also has 2-28 Vrms auto-ranging input, 16 programmable TTL DIO...

Read More »
Electronic Converters

DC/DC Converters feature 10 mVpp output noise.

Incorporating low switching noise techniques at input and output section, EAL50 Series of 50 W single output converters have 2:1 input voltage range and offer up to 91% efficiency. Features include 150 mV dropout linear regulator and control circuit that maintains minimum constant dropout voltage over line, load, adjust range, and temperature. Converter is packaged in 2 x 2 x .5 in. metal case...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics