Electronic Converters

Optical-to-Electrical Converter features rugged design.
Electronic Converters

Optical-to-Electrical Converter features rugged design.

Housed in compact extruded aluminum enclosure, J740 performs wideband analog conversion of fast fiber-coupled signals from DC to greater than 1 GHz. It features calibrated conversion gain of 1 V/mW (0.5 V/mW into 50W) and is compatible with single and multi-mode fiber. Available in 850, 1,310, and 1,550 nm wavelengths, unit suits applications including high-speed data links, fiberoptic test and...

Read More »
Electronic Converters

ADC Mezzanine Card offers 6 GB/sec data throughput.

Available in both air-cooled and conduction-cooled rugged versions, ADC512 FPGA Mezzanine Card is 3 GS/sec, 8-bit ADC card that routes high-speed ADC I/O directly to host board FPGA via FMC connector. Dual-channel card's ADC devices support sampling rate of 3,000 MS/sec per channel. By routing ADC interfaces directly to FMC connector, ADC512 enables FPGA on host board to directly control and...

Read More »
Low Power Computer Captures and Transmits Remote Data
Electronic Converters

Low Power Computer Captures and Transmits Remote Data

The JK microsystems DataMover offers an economical solution to remote data capture and transmission. By integrating optional GPS receiver, GPRS cell modem and sleep-mode power controller in a die cast aluminum enclosure, the DataMover is capable of logging and transmitting data from remote or inaccessible locations. With power consumption of less than one watt during operation and less than 3...

Read More »
Electronic Converters

Microchip Technology Recognized for Leadership and Innovation

Company Honored by National and Arizona Publications for Product and Business Excellence CHANDLER, Ariz., Jan. 27, 2009 [NASDAQ: MCHP] - Microchip Technology Inc., a leading provider of microcontroller and analog semiconductors, today announced that it has been recognized by the following business and electronics organizations for product and workplace leadership. As a worldwide leader in...

Read More »
Electronic Converters

Single-Channel DACs feature low power of 80 µA at 1.8 V.

Available in SC70 package, 16-bit pin-compatible DAC8411 family has power supply range of 1.8-5.5 V and settling time of 6 Â-µsec. They utilize 3-wire serial interface that operates at clock rates up to 50 MHz, and have operating temperature of -40 to +125°C. Providing low power-on glitch of only 17 mV and 0.15 nV-sec output glitch energy, compact devices are suited for battery-powered...

Read More »
Electronic Converters

Media Converter operates in temperatures from -40 to +75°C.

Designed to convert 10/100Base-TX Ethernet signals to 100Base-FX fiber, iCON-32900 series converter accepts voltage range from 12-48 Vdc. Features include Link Fault Pass-through (LFP) function which allows tracing network link failure; 2 redundant power inputs for non-stop operation; and relay output alarm. Offered in IP20 aluminum housing, unit meets NEMA TS1/2, UL1604, and UL60950 standards...

Read More »
Converter Module translates encoder data to USB 2.0 format.
Electronic Converters

Converter Module translates encoder data to USB 2.0 format.

Dual Encoder to USB Converter module can handle signals from 2 SSI absolute encoders or 2 quadrature incremental encoders. Using PC interface, module can be programmed through USB port for number of bits with absolute encoders, and for incremental encoders count mode (X1, X2, X4), reset, preset, and preset/reset on index are also programmable. Module is suited for system setup and debugging, data...

Read More »
DACs manage power consumption in process control applications.
Electronic Converters

DACs manage power consumption in process control applications.

Quad (MAX5134/MAX5135) and dual (MAX5136/MAX5137), 16-bit and 12-bit DACs are designed to address concerns about power consumption. In sleep mode, MAX5134-MAX5137 family draws less than 300 nA, and four 12- or 16-bit DACs can operate on average current of 2.5 Â-µA. Featuring integrated, high-precision voltage reference, pin- and software-compatible multi-channel DACs give designers...

Read More »
Interface Converter converts data at up to 921,600 bps.
Electronic Converters

Interface Converter converts data at up to 921,600 bps.

Model 4163/4164 Ethernet-to-RS485/422/232 interface converter converts Ethernet 10/100 Mbps IEEE 802.3 compliant data from standard LAN/WAN connection to serial asynchronous data interface over RS232 or RS485/422 networks. Featuring ESD protection circuitry, RoHS compliant product suits application in building automation, industrial manufacturing, and utilities. Converter allows remote monitoring...

Read More »
Electronic Converters

Data-Acquisition System integrates precision data converters.

Designed for signal conditioning and sensor excitation, MAX1329, low-power data-acquisition system features 12-/16-bit analog-to-digital converter, dual 12-bit force-sense digital-to-analog converters, and voltage references. Product operates from 1.8-3.6 V digital supply and 2.7-5.5 V analog supply, and has quiescent supply current of 3.75 mA (typ) and 0.5 Â-µA (typ) in shutdown mode....

Read More »

All Topics