Electronic Converters

Audio DAC extends playback time in portable devices.
Electronic Converters

Audio DAC extends playback time in portable devices.

WM8910 features SmartDAC(TM) technology, a low power DAC capacitor switching architecture that enables DAC to headphone power consumption of less than 4.5 mW. SilentSwitch(TM) technology provides pop and click suppression capability by incorporating clamp and sequencer circuitry, while Class W amplifier technology tracks actual music signal level and uses adaptive dual drive charge pump to...

Read More »
Electronic Converters

Agilent Technologies Offers 4-Tap De-Emphasis Converter, Highest Flexible SSC Injection

J-BERT Enables Robust Receiver Designs for Next-Generation, Multigigabit Serial Interfaces Such as QPI, 10GBASE-KR, SATA and USB 3 SANTA CLARA, Calif., Oct. 27, 2009 -- Agilent Technologies Inc. (NYSE: A) today announced the addition of a 4-tap de-emphasis signal converter N4916B, an ultraflexible SSC injection and a SATA ISI channel to its J-BERT N4903B high-performance serial BERT. The new...

Read More »
Remote Charge Converter is radiation tested to 1.0 Mrads.
Electronic Converters

Remote Charge Converter is radiation tested to 1.0 Mrads.

With rugged 2-wire (IEPE) single ended design, Model 2771C-XX operates from 4-20 mA of constant current power. Unit offers broadband noise range down to 5 Â-µ Vrms, with frequency response of 0.4-50 kHz, and can withstand shock loads of up to 100 g peak. Available in 3 different fixed gains of 0.1, 1.0 and 10 mV/pC, model supports TEDS as per IEEE P1451.4 for smart sensor and larger channel...

Read More »
Downconverting Mixers target 3G, 4G wireless basestations.
Electronic Converters

Downconverting Mixers target 3G, 4G wireless basestations.

Covering 700 MHz to 4 GHz frequency range, LTC554x family of 4 downconverting mixers offer IIP3 of 26 dBm, noise figures of 9-10 dB, and conversion gain of 8 dB. They operate on 3.3 V supply, drawing supply current of 200 mA, and include power-down feature with turn-on and turn-off time of 2 and 3 Â-µs, respectively. Units integrate IF amplifier, LO buffer, LO switch, and RF balun...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Electronic Converters

ADC provides 12-bit resolution and 1 GSPS sample rate.

Model ADS5400 offers signal-to-noise ratio of 59 dBFS and spurious-free dynamic range of 75 dBc in 1st Nyquist. It also has 58 dBFS SNR and 70 dBc SFDR performance for intermediate frequencies beyond 1,000 MHz. Fully buffered analog input isolates onboard sample and holds internal switching to avoid disturbing signal source. Specified over -40 to +85°C temperature range, monolithic...

Read More »
Electronic Converters

Millimeter Wave Converters offer adjustable output power.

With frequency ranges from 60-90 GHz and 75-110 GHz, respectively, R&S ZVA-Z90E and R&S ZVA-Z110E can analyze power-dependent behavior of amplifier and mixers. Compression point can be determined if vector network analyzer is connected. Featuring dynamic range greater than 110 dB, millimeter wave converters allow true differential 4-port measurements up to 110 GHz and are suited for...

Read More »
ComNet Introduces ComWorx(TM)
Electronic Converters

ComNet Introduces ComWorx(TM)

Expands Ethernet Product Offering, brings to market under ComWorx(TM) Product Line Anaheim, CA. September 21, 2009, ComNet, Communication Networks of Danbury, Connecticut, a leading manufacturer of fiber optic transmission and networking equipment, is introducing the ComWorx(TM) product line to bring to market its expanded Ethernet product offering. ComNet has recently expanded their Ethernet...

Read More »
14 and 16 Port Integrated Converter Racks
Electronic Converters

14 and 16 Port Integrated Converter Racks

Toronto,Canada- GAO Fiber Optics (www.GAOFiberOptics.com) has released its reliable 14 and 16 port integrated converter racks which are designed to accommodate various slide-in media converter modules for multiple segment cross connection. With a slim,low profile chassis and the ability to use a mix of 10Mbps, 100Mbps and Gigabit media converter cards, the integrated converter rack is an ideal...

Read More »
Digital Fanout Buffer offers adjustable inputs from -4 to +4 V.
Electronic Converters

Digital Fanout Buffer offers adjustable inputs from -4 to +4 V.

Suited to embedded OEM or benchtop use, P730 comes in anodized aluminum enclosure and features 2 input banks that are user-routable to 2 output banks comprised of 4 buffered electrical outputs. Input and output levels are independently adjustable, enabling compatibility with CMOS, TTL, LVDS, NECL, PECL, NIM, and sine wave systems. Fiber optic inputs are optionally available, and fully DC-coupled...

Read More »
Applied Power the Driving Force in Power Electronics
Electronic Converters

Applied Power the Driving Force in Power Electronics

APS is a high-tech company concentrated exclusively on power electronics, providing innovative, leading-edge, quality-engineered products. Our technical expertise and practical experience allows us to develop and produce power electronic products that satisfy the toughest requirements and withstand the harshest environments. APS featuring a complete converter & controllers solution with our...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers