Electronic Converters

Electronic Converters

Digital-to-Analog Converter provides 1,000 MS/sec sample rate.

Housed in 72-lead LFCSP, dual, 16-bit TxDAC+® Model AD9125 includes features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. Unit offers programmable full-scale output current from 8.7-31.7 mA and 4-wire serial port interface that allows programming/readback of many internal parameters. Flexible CMOS digital...

Read More »
Downconverting SiGe Mixer IC suits 1,500 MHz WCDMA/LTE base stations.
Electronic Converters

Downconverting SiGe Mixer IC suits 1,500 MHz WCDMA/LTE base stations.

Model MAX19993 is 1,200-1,700 MHz dual, downconverting mixer with on-chip LO switch, buffer, and splitter. Packaged in 6 x 6 mm, 36-pin TQFN, unit also integrates 2 mixer cores, 4 amplifiers, and 3 baluns. Monolithic IC provides 2 independent downconversion channels, each with +27 dBm IIP3, 6.4 dB conversion gain, and 9.8 dB noise figure. It also offers 2RF-2LO spurious rejection of 72 dBc for RF...

Read More »
Electronic Converters

SENCORE Unveils the TXS 3453 Transcoder at the 2010 NAB Show

SENCORE Unveils the TXS 3453 Transcoder at the 2010 NAB Show POSTED: Apr 12, 2010 LAS VEGAS - April 12, 2010 - SENCORE, a leading provider of signal quality and video delivery solutions, today unveiled the new TXS 3453 Transcoder, a platform offering real-time, best-in-class transcoding in a reliable, high-density 1RU chassis. The SENCORE TXS 3453 Transcoder includes a configurable compression...

Read More »
Electronic Converters

Fast Ethernet Media Converters comply with IEC61850, IEEE1613.

Supplied in hardened aluminum case and rated for -40 to +75°C operation, IP30-rated iCON-1141 series translates transmission signals from 100BASE-TX cable to 100BASE-FX fiber optic cable. Link fault pass-through helps identify network errors, while redundant power and relay output warning alarm help prevent damage and loss. Available in all types of fiber cabling and connector types,...

Read More »
Plastic Knobs
Sponsored

Plastic Knobs

Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.

Read More »
Electronic Converters

ADC offers intelligent system power management.

Once programmed through I2C interface, 12-bit, 2.2 V Model ADS7924 can operate independently, periodically waking itself to scan all 4 ADC channels every 10 ms while using 5 Â-µW. Successive approximation device can share one operational amplifier for all 4 channels for applications requiring additional signal conditioning. Housed in 3 x 3 mm QFN package, converter helps save power in energy...

Read More »
Converter/Extender System includes ESD protection circuitry.
Electronic Converters

Converter/Extender System includes ESD protection circuitry.

Designed to extend USB connections via high-speed Fiber Interface, Model 4162 Host and Model 4169 4-port Hub are suited for environments subject to high EM or RF interference that might corrupt USB communications over copper interface. Four-port hub provides USB standard of 500 mA per port. Operating from 0 to +50°C, system offers true plug-and-play operability with support for...

Read More »
Electronic Converters

Multichannel D/A Converter features dynamic power control.

Model AD5755 data converter features dynamic power control circuitry that continually senses load impedance and delivers required power to load while minimizing power loss in rest of system. Unit incorporates 4 precision 16-bit DACs, with programmable voltage or 4-20 mA output drivers, as well as 5 ppm/°C internal reference. Operating over -40 to +105°C temperature range, IC offers...

Read More »
Electronic Converters

Analog-to-Digital Converters feature 200 MSPS sampling rate.

Featuring SNRBoost technology, 11-bit quad Model ADS58C48, dual Model ADS58C28, and buffered single-input Model ADS58B18 are intended for multi-carrier and multi-mode communications systems requiring up to 65 MHz of signal bandwidth. Devices consume 215, 230, and 310 mW/channel, respectively at 200 MSPS. Delivering up to 72.3 dB SNR across 60 MHz bandwidth or 75.4 db SNR across 30 MHz, units are...

Read More »
Electronic Converters

USB, PS/2 Converter extends legacy data center equipment life.

Extending life of legacy data center equipment, plug-and-play PS/2 to USB Converter lets IT managers use existing PS/2 KVM switches, servers, and KVM extenders with USB keyboard/mouse. It features two 6-pin mini DIN and 2 USB Type A connectors within 3.54 x 1.18 in. form factor and derives power from keyboard or mouse PS/2 ports. No external power is required, and functionality helps preserve...

Read More »
Electronic Converters

Logic Level Translator suits mixed voltage applications.

Designed to resolve compatibility issues in mixed voltage environments, 8-bit Model FXMA108 includes auto-direction feature that eliminates need for direction control pin and minimizes traces in notebook, smartbook, set-top box, and portable medical designs. Device features operating range of 1.65-5.5 V and handles over-voltage surges up to 7 V. Housed in 20-pin DQFN package, translator is suited...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics