Electronic Converters

Electronic Converters

Level Probe Converter provides 4-20 mA signal for controllers.

Powered by 24 Vdc, LPC420 senses liquid level and provides 4-20mA analog output for use by pump controller or PLC in liquid level control applications. All setup is done using 4 DIP switches on unit, and sensitivity is set for type of liquid being detected. Analog output delay setting controls how fast analog output transitions from one level output value to another. Supplied in aluminum...

Read More »
Electronic Converters

Dual 12-, 14-, and 16-bit DACs combine high precision, low power.

Available in 3 x 3 mm QFN or 3 x 5 mm MSOP package options, DAC8562 series deliver precision with 0.1 nV-sec glitch energy, max offset error of 4 mV, max integral non-linearity (INL) of 0.75 LSB at 12-bits, and max reference drift of 10 ppm/°C. Integrated precision reference provides 20 mA sink/source capability, eliminating need for external buffer. Consuming 0.1 mA per channel, DACs...

Read More »
Industrial Ethernet Unmanaged Switches Expand Fiber Options
Electronic Converters

Industrial Ethernet Unmanaged Switches Expand Fiber Options

AutomationDirect's line of Stride(TM) Ethernet products includes industrial-grade unmanaged Ethernet switches and media converters. All models feature multiple 10/100BaseT RJ45 Ethernet ports, while several also include an ST type fiber optic connection. Recently added are units with an SC fiber optic connector. Plastic case models are designed for standard temperature range (-10 to +60 °C)...

Read More »
Electronic Converters

Single-Wire 16-bit DAC simplifies smart transmitter design.

Supplied in 4 x 4 mm package, DAC161P997 delta-sigma DAC features single-wire interface and 4-20 mA current loop drive. Product helps reduce component count by enabling use of single isolation component to cross isolation boundary and can also interface directly to MCU. While consuming less than 190 Â-µA, IC offers 16-bit accuracy with minimal temperature coefficient of 29 ppm and long-term...

Read More »
Current to Analog Converters measure less than one inch wide.
Electronic Converters

Current to Analog Converters measure less than one inch wide.

Available from 0-1 A to 0-10 A, Current to Analog Converters allow user to monitor flow of current in circuit indicating circuit is operating and load is connected and active. Use of Hall Effect sensor enables both AC and DC currents to be measured. Since 3 different common analog outputs are available, modules will work in any control application where current to analog signal conversion is...

Read More »
Pulse Control Module converts input to time proportional output.
Electronic Converters

Pulse Control Module converts input to time proportional output.

PCM5 series converts 4-20 mA signal from process/temperature controller or computer to time proportional output. Mounted directly on single 3-32 Vdc Input SSR, module supports single-phase, 50 or 60 Hz operation and tolerates inputs of less than 4 mA. In manufacturing environment, series is used with process controller and solid state relay to control electric heaters for oven drying manufactured...

Read More »
Electronic Converters

TI Bolsters Ultra-low-power, High-Speed, ADC Family with Eight Dual-channel Devices from 65 to 250 MSPS

DALLAS, July 21, 2011 - Texas Instruments Incorporated (TI) (NYSE: TXN) today expanded its line of high-speed, ultra-low power consumption analog-to-digital converters (ADCs) with eight dual-channel devices available in 12- and 14-bit resolutions at speeds from 65 to 250 MSPS. With these additions, the ADS42xx family provides the performance and bandwidth needed for 3G/LTE wireless base stations,...

Read More »
Electronic Converters

16-Bit ADC is offered in small QFN package.

Available in 2 x 1.5 mm QFN package, ADS1118 is 16-bit delta-sigma ADC with integrated PGA, reference, temperature sensor, and 4-input multiplexer. It provides direct, linearized measurements with uncalibrated error below 0.5°C from 0 to +65°C. Supporting data rates to 860 samples/sec and power supplies from 2.0-5.5 V, ADC consumes 150 Â-µA typ and provides complete data...

Read More »
Bus Converter converts CompactPCI/PXI boards to PCI-Express.
Electronic Converters

Bus Converter converts CompactPCI/PXI boards to PCI-Express.

Combining bus converter, housing, and remote system, ME-Synapses Express is available in 2 models with 2 or 6 slots of 3U PICMG CompactPCI standard. System connects to PC or laptop via PCIexpress cable, and because it is completely transparent, it is possible to integrate boards by Meilhaus Electronic as well as boards by other manufacturers that are compatible with 3U CompactPCI standard.

Read More »
Protocol Converter lets CAN-devices connect to industrial networks.
Electronic Converters

Protocol Converter lets CAN-devices connect to industrial networks.

With throughput delay of no more than 5 msec, Anybus® Communicator CAN(TM) Protocol Converter enables any industrial device with CAN interface to communicate with Profibus, Profinet, DeviceNet, EtherNet/IP, EtherCAT, or CANopen networks. This allows automation devices, even those with slower CAN communication, to be integrated into high-speed fieldbus/Ethernet networks without restrictions...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers