Frequency Converters prevent power disturbances.
Featuring double-conversion design, ED Series(TM) UVS PlusÃ-® Rackmount Frequency Converters regenerate clean pure sinewave computer-grade power with regulated 3% voltage and frequency independent of generator voltage and frequency drift. This allows connected equipment to continuously operate during extended brownouts to 88 Vac. Accepting 50, 60, and 400 Hz input and yielding fixed 50 or...
Read More »ADCs suit bridge sensor applications.
Fabricated using mixed-signal CMOS technology, 24-bit Models ADS1232 and ADS1234 integrate low-noise programmable gain amplifier, delta-sigma ADC, and internal oscillator, providing front-end solutions for weigh scales, strain gauges, and pressure sensors. Low-noise PGA features rms noise of 17 nV at 10 SPS data rate or 44 nV at 80 SPS, and has selectable gain of 1, 2, 64, or 128, supporting...
Read More »A/D Converters feature software-selectable input ranges.
Addressing industrial data conversion needs, PulSARÃ-® ADCs include 16-bit AD761x series and 18-bit AD763x series. Analog input ranges are software-selectable across unipolar and bipolar input ranges. Along with error correction circuits, ADCs feature serial and parallel interfaces as well as internal registers that enable flexible switching from input voltage ranges on-the-fly, with zero...
Read More »
Analog-to-Digital Converter optimizes receiver performance.
With spurious free dynamic range of 100 dBc combined with 78 dB SNR, 16-bit Model LTC2208 resolves low-level signals in presence of large interferers and blockers. Offered in speed grades up to 130 Msps, unit includes internal transparent dither circuit, which optimizes SFDR response, and digital output randomizer that minimizes unwanted tones caused by digital feedback. Unit is housed in 9 x 9...
Read More »
Everything You Need to Know About Cold Chain/Temperature Controlled Packaging
This ebook provides an overview of everything you need to know about cold chain and temperature-controlled packaging.
Read More »Quad-Output DC/DC Converter has low-noise, 15 W design.
Manufactured in 2.0 x 2.0 x 0.395 in. coated metal case that provides 6-sided EMI shielding, BD16000 features 2:1 input voltage range, input-to-output isolation, and soft start capability. It also incorporates input Pi filter, short circuit protection, 380 kHz switching frequency, flyback topology, and 4 LDO linear regulators. Converter accepts 18-36 Vin and provides 3.3, 5, 12, and 5 Vout at 1...
Read More »ADC suits precision measurement applications.
Manufactured in TQFP-64 package, ADS1610 is 16-bit, 10 MSps delta-sigma analog-to-digital converter (ADC) that offers 86 dB SNR and 95 dB SFDR. Product operates from a +5 V analog supply and +3 V digital supply. Along with 86 dB SNR and 95 dB SFDR over 5 MHz bandwidth, unit features -94 dB THD and 4.4 MHz passband with under 0.0002 dB of ripple, which provides wideband signal processing. On-chip...
Read More »Tunable Downconverter IP Core boosts channel density.
Designed for Xilinx's Virtex II, Virtex II Pro, or Virtex 4 FPGAs, 256-channel Model 4954-430 handles 16-bit real or complex input data at up to 185 MHz. Channelizer stage generates 1,024 fixed adjacent frequency channels with alias-free performance greater than 75 dB across passband of each channel. Each of 256 DDCs has programmable numerically controlled oscillator to implement independent...
Read More »
Analog-to-Digital Converter delivers 13-bit resolution.
Manufactured in 80-pin TQFP PowerPad(TM) package, ADS5444 incorporates high-bandwidth input buffer, linear track-and-hold stage, and internal reference. Analog-to-digital converter (ADC) operates from 5 V supply and provides LVDS-compatible digital outputs from 3.3 V supply. Specified over -40 to +85Ã-
Read More »High-Speed ADC integrates 1:4 demultiplexed outputs.
Featuring embedded 1:4 LVDS demultiplexer for direct interface with standard FPGAs, 10-bit AT84AS004TP has clock frequency of 2 GSps and SNR of 51 dB @ 2 GSps in first Nyquist conditions. Gain flatness remains flat at Ã-
Read More »
Digital to Synchro Converters provide -
Measuring 2.6 x 3.1 x .60 in., Digital to Synchro Converter Modules accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signal. Standard output voltages are 90 or 11.8 V RMS L-L, 60 or 400 Hz. Output is short circuit protected and loading of 1.5 Va is available. Digital inputs are TTL/DTL compatible, and synchro output and reference is fully transformer...
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
