Electronic Converters

Step Down Converter offers over 90% efficiency.
Electronic Converters

Step Down Converter offers over 90% efficiency.

Model MD5001 contains control IC and main switch MOSFET on single chip, SOP-8 package. Input voltage range is 4.5-14 V and output voltage is 0.8-12 V with maximum output current of 1 A. Unit includes remote on/off, overcurrent protection, and built-in thermal protection. It is recommended for designers who have employed regulators but find thermal issues to be a problem and have insufficient...

Read More »
A/D Converter features 1.0 Msps sampling rate.
Electronic Converters

A/D Converter features 1.0 Msps sampling rate.

Housed in 32-pin ceramic TDIP package, 18-bit ADS-953 optimizes signal return paths and provides internal, local decoupling to obtain -95 dB peak harmonics and 76 Â-µVrms noise-level performance. Signal-to-Noise Ratio is 93 dB, and unit offers no missing codes over operating temperature range. Gate array provides all timing and control logic needed to operate from single edge-triggered start...

Read More »
Multi-Channel DAC is suited for audio applications.
Electronic Converters

Multi-Channel DAC is suited for audio applications.

Housed in 48-lead TQFP, PCM4104, 24-bit audio digital-to-analog converter (DAC) employs delta-sigma technology with multi-level modulator, and switched capacitor output filter. Differential voltage outputs, 6.15 Vp-p, are provided for each channel, and unit is offered in standalone and software-controlled configurations. Designed for professional audio applications, it features 118 dB dynamic...

Read More »
Digital To Analog Converters guarantee 16-bit monotonicity.
Electronic Converters

Digital To Analog Converters guarantee 16-bit monotonicity.

Dual Model LTC2602 and quad Model LTC2604 are available in 12, 14, and 16-bit versions, each with monotonic performance over temperature with DNL of ±1 LSBMAX. Model LTC2604 consumes 250 Â-µA per DAC and drops to 0.25 µA per DAC in power-down mode. Each DAC can be simultaneously updated with different input code. Converters deliver rail-to-rail voltage outputs over 2.5-5.5 V...

Read More »
Converter offers direct IF sampling up to 500 MHz.
Electronic Converters

Converter offers direct IF sampling up to 500 MHz.

Housed in 48-Pin TSSOP package, LTC1750 analog to digital converter (ADC) simplifies basestation design by eliminating second intermediate frequency (IF) down-conversion stage. This 80 Msps, 14-bit ADC undersamples up to 500 MHz input frequencies and delivers 84 dB spurious free dynamic range with 140 MHz inputs and 74 dB SFDR with 350 MHz inputs. Features include configurable I/O, on-chip PGA,...

Read More »
USB Device provides JTAG/BDM debugging.
Electronic Converters

USB Device provides JTAG/BDM debugging.

Based on on-chip debug technology, usbDemon operates as a converter of JTAG commands. Windows host PC communicates with unit via USB protocol using proper OCD signals required by target. Host port may be JTAG, E-JTAG, OnCE, COP, BDM, or any of several other types of connections. Applications programming interface is fully compatible with software debuggers, including GNU tools suite.

Read More »
Encoder-Resolver-Synchro Card is IBM PC/AT compatible.
Electronic Converters

Encoder-Resolver-Synchro Card is IBM PC/AT compatible.

Quadruple-channel IB Card is available whole or user-populated with any combination of Synchro/Resolver to Digital and/or Digital to Synchro/Resolver converters with industry standard pin-outs. Available converters include those with internal micro-transformers for isolation of all signal and reference lines. Unit supports single turn converter precision to 1 part in 65,536 and multi turn/multi...

Read More »
Electronic Converters

DC/DC Converter switches at 200 A/µs.

Model SMT12F non-isolated, 12 A, point-of-load converter yields power density in excess of 389 W/inÂ-³. It uses synchronous buck regulator topology and 600 kHz switching frequency to achieve efficiency of 95% at 5 V in, 3.3 V out. Suited for routers, storage switches, and wireless base stations, board-mounted unit features power dissipation of less than 2 W at full output and operating...

Read More »
Converter senses ultra-low light levels.
Electronic Converters

Converter senses ultra-low light levels.

Light-to-Frequency Converter, Model TSL2237 is available in 3-pin Side Looker package and is suited for applications that require high resolution, low light level measurements, and temperature stability. Such applications include automotive sensors, color calibration for computer monitors, densitometers, laser printers, lighting control, camera exposure control, and medical pulse oximetry systems.

Read More »
Protocol Translator interfaces to over 350 devices.
Electronic Converters

Protocol Translator interfaces to over 350 devices.

Able to act as client or server, FieldServer EtherNet/IP Gateway enables users to interface to various EtherNet/IP devices found in several industries. Device driver library includes 70+ protocols and can interface to 350+ devices. Product is available in single-port FS-B20 Series or multi-port FS-B40 Series. Singular Gateway links device to EtherNet/IP, and information available through...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers