Electronic Converters

Fiber Optic Converter suits control cabinet applications.
Electronic Converters

Fiber Optic Converter suits control cabinet applications.

Model PSI-MOS transmits fiber optic data for serial communication interfaces and bus systems. By converting electrical copper-based signals to glass or polymer fiber technology, it allows isolation of Interbus, Profibus, Modbus, DeviceNet, CANopen, RS-232, and other RS-485 networks. Onboard diagnostics provide information about signal quality on fiber optic path. If failure occurs, each module...

Read More »
Converter Pair acts as data transceiver.
Electronic Converters

Converter Pair acts as data transceiver.

LTX-5510 Electrical/Optical - Optical/Electrical converter pair digitizes analog input signal to 12 bit precision, along with 4 auxiliary digital inputs, and transmits data over Gbit fiber optic link. LTX-5510R receives transmitted data and reconstructs 5 signals at far end of link. Transmitter has selectable input ranges, ±1 or ±5 V, and input impedances may be set to 1 Megohm or 50...

Read More »
Analog-to-Digital Converters target audio applications.
Electronic Converters

Analog-to-Digital Converters target audio applications.

Models PCM4202 and PCM4204 are 2- and 4-channel converters featuring 118 dB dynamic range and -105 dB total harmonic distortion. Both devices support 24-bit linear PCM output data, with sampling frequencies up to 216 kHz, and can be configured to output either 64x or 128x oversampled, 1-bit direct stream digital data for each channel. DSD input mode allows 1-bit DSD to 24-bit PCM data format...

Read More »
ADC Family consumes power at rates down to 230 mW.
Electronic Converters

ADC Family consumes power at rates down to 230 mW.

Available in 32-pin, 5 x 5 mm QFN package, LTC2220 ADC family include models that range from 10-170 Msps at 12- and 10-bit resolution, as well as 14-bit converters to 80 Msps. Optimized for undersampling, 3 V converters operate at high Intermediate Frequencies (IF); LTC2249 features 575 MHz bandwidth and achieves 85 dB SFDR up to 140 MHz input. Pin-compatible versions, at sample rates of 65, 40,...

Read More »
Synchro/Resolver to DC Converters come in 1.5 in.³ package.
Electronic Converters

Synchro/Resolver to DC Converters come in 1.5 in.³ package.

Operating at 400 conversions/sec, series SD109 miniature solid state synchro to DC converters offer peak angular error of +3 min. Products convert 3 phase Synchro or 2 phase Resolver inputs into DC Sine and Cosine outputs. They accept output of standard 11.8 or 90 V 3-wire Synchro or 4-wire Resolver and provide 2 DC voltages. Input is transformer isolated and balanced line to line, and synchro...

Read More »
Data Converters come in 2.9 x 2.8 mm SOT-23 package.
Electronic Converters

Data Converters come in 2.9 x 2.8 mm SOT-23 package.

Available in 8-lead packaging, nanoDAC(TM) AD5060 and AD5660 digital-to-analog converters offer 16-bit data conversion while integrating additional circuit components on-chip. Model AD5060 delivers 1 LSB max linearity error (INL), including its on-chip output buffer amplifier for open loop systems. For closed loop systems, AD5660 contains integrated 10 ppm/°C max on-chip reference and...

Read More »
Current-to-Pressure Converter offers reliable performance.
Electronic Converters

Current-to-Pressure Converter offers reliable performance.

Suited for variety of mounting positions and locations, Type 140 I/P converter features fail to zero output pressure on signal failure, electronic closed loop, IP66 housing, and vibration immunity. Jack socket is provided for on-site monitoring and local calibration. Certified for use in hazardous areas, product incorporates encapsulated modular electronics and sub micron, field replaceable,...

Read More »
Analog-to-Digital Converters range from 10-170 Msps.
Electronic Converters

Analog-to-Digital Converters range from 10-170 Msps.

Operating from 3.3 V supply, Series LTC2220 is comprised of 24 converters with 10, 12, or 14-bit resolution. At 630 mW, 12-bit Model LTC2224 operates at 135 Msps and comes in 7 x 7 mm QFN package. Suited for low power base station designs and optimized for undersampling, unit features 775 MHz bandwidth and achieves 77 dB SFDR up to 250 MHz input. Series offers selectable input range of ±0.5...

Read More »
Electronic Converters

USB 2.0 Device is suited for JTAG/BDM debugging.

Based on proprietary on-chip debug (OCD) technology, usb2Demon is designed for JTAG (IEEE Standard 1149.1) or background debug mode (BDM). It operates as converter of OCD commands, and target port may be JTAG, E-JTAG, OnCE, COP, BDM or any other supported connection. API is fully compatible with microprocessor architectures and software debuggers, including GNU tools suite (GCC, GAS, and GDB)....

Read More »
Converter provides 3-phase power from single phase source.
Electronic Converters

Converter provides 3-phase power from single phase source.

BOOSTER(TM) Single to Three Phase Converter features power factor correction and full-hard starting capabilities of 600% overcurrent on-demand. Unit maintains voltage balance by digitally monitoring 3-phase output and electronically switching capacitors in and out to maintain optimal balance. With no contactors to wear, maintenance-free unit offers self-healing polypropylene capacitors and EMI...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers